Phone call and fax call

Priter does not wake up when a fax call comes. It does not know the difference between a regular call and fax call. When it is ON, on a regular call it produces a disturbing sound that is very loud.
How can I fix this?

Hello @dearuncle,
Welcome to the HP Support Forums! I see you are running into some problems with the Fax settings on your HP Officejet 4630. Please go ahead and get started below:
I would like you to start here and make sure you have the Fax configured properly: Setting Up the All-in-One to Send and Receive Faxes
Once you have it configured, if you are still getting problems faxing continue here: Cannot Send or Receive Faxes
Let me know the outcome, I will watch for your reply!
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Missed calls and placed calls are not saving in 7942 phone

HI
i am facing some issue in telephone directory, in my phone missed calls and placed calls are not saving. i am using cisco call manager and 7942 phone. please help me in this issue.
Thanks
Shijo

Hi Shijo,
Is this affecting only one 7942 IP phone or all of them? if this is affecting all then you may try ta firmware upgrade. If this is only affecting one of them then you can compare the settings of this phone with the working ones or try setting the phone to factory defaults.
HTH
Manish

HT201412 The I phone 4 keeps freezing. If I'm on a call and another caller calls in and or leaves a message the phone will freeze and be unresponsive to anything for 5 mintues. The phone has been reset and backed up. Any other suggestions?

The I phone 4 keeps freezing. If I am on a call and another caller calls in /or leaves a message the phone will lock up for 5 minutes. Restarting does not help the phone turns back on locked up. Any suggestions on a fix?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

10.3 is slow in making call and receiving call

os 10.3 is kinda slow while making a call and receiving call? its not a bug in handset cause i've experienced the same issue with 3 z10 and 1 z30 which is im using rightnow all the phones runnin on os 10.3 are slow while making and receiving a call i hope you will get my point?
Posted From BB-Z3O
Solved!
Go to Solution.

Well, first, not all devices are doing it, at least not as bad as was just described. So, that means contrary to your statement, an OS reload and/or wipe would likely fix it.
Second, you haven't said what version you're on so no way to know if there's an update for you or not.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Why am i missing so many calls and the call going directly to my voicemail?

Why am i missing so many calls and the call going directly to my voicemail?

Make sure the phone is not in Do Not Disturb mode.

Payment advices not picking accounting clerk phone number and fax number.

Hi,
We have executed payment program and payment advices got generated. But in the output it is printing everthing i.e accounting clerk name, vendor number and amount. But it is not filling the accounting clerk phone number and fax number even though we have maintained it in our customized transaction code. Will this values in the payment advices will be picked up from standard t.code OB05, there we don't have option to give these two values.
Can anyboday help me on this.
Regards,
Sree

goto accunt groups with screen layout,
after creating the group or existing group, double click on account management, in payment transactions make the required fields are required.
regards,

Query for Customer site Phone number and Fax number in Oracle Apps

Dear All,
Can anyone guide me how to write qurey for Customer site phone number and Fax number for Acive customers.
Thanks in advance.
Best Regards
NRC

Hi Team,
This is a shipping report in header level we have the customer information with site address. The requirement is along with site address we need to show the phone number and Fax number .For this we need to write the formula column.Thes are the comes through HZ parties only. I have no idea how to achieve this.
Best Regards
NRC

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do

Not showing missed calls and dropping calls

I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported this and I received a refurbished phone and still have the same problem any know issues with this?

Hi bbarront,
I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device. Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail? I look forward to hearing from you soon.
Thank you for your involvement in our community forums,

HT4515 When I am on a call and another call beeps in, it doesn't do call waiting iD and doesn't give me the option to swap calls anymore. How do I get it to work?

When I am on the phone and another call beeps in, it doesn't give me caller ID. It also does not give me the option to swap the call. How can I fix this?

Make sure that call waiting is turned on and check with your carrier to ensure that is activated on your account.

Can't make FXO calls, and receiving calls has no sound

An issue started today where I can't make or receive calls using FXO ports (POTS lines). I tested the cable going into the FXO ports and the lines work fine making calls.
When I call the number of one of the FXO lines in the UC320, the SPA303 rings properly, but when picked up, there is no sound on either side. When the SPA303 hangs up, the caller phone call ends 20 seconds later.
When trying to dial out, there is no dial tone, and the call eventually hangs up. I'm using very old firmware, but there were no changes made that should affect the UC320.
I've tried FXO Impedence Testing, but nothing happens, it just says "Test Running" and the phone number doesn't get a call.
My network does not have the UC320 as a firewall pointing to the internet, so the time and date is way off, but this hasn't caused any issues.

Hi and Welcome to the Forums!
From your description, it sounds as if your device itself has somehow failed. My opinion is that your formal support channel is what you need to use -- via your carrier.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

3gs locking up while on calls and after calls...

At times (not everytime but more often than not) my 3gs locks up on me when I'm on a call, after a call, and when I try to leave a voicemail.
Locks up as in, goes black, and no matter how many times I push the home button, or try to shut the phone off as to reset, will stay on that black screen (even if the call is still active), making it so that I can't even hang up.
Only way I have been able to get around this is by turning the vibrate switch on and off. That seems to trigger the home screen to appear.
Not sure what to do. Have already been to the genius bar for this once before, for which the advice they gave me didn't help (restore etc..)
Can anyone help...?
Thanks so much ahead of time.

Lawrence Finch wrote:
If you have a case on the phone remove it. Some cases cover the sensor that blanks the screen when you hold the phone to your ear. What you describe is a symptom of this problem.
Thanks Lawrence.
I do use a case, however it is a see through hard case, full body, of which the entire top of phone is covered with a very thin transparent screen protector (allowing touch to work). Would this type of case be covering the sensor as you mention above? So curious as to no longer use this type of case if so.
Also... if anyone can advise me on whether it's best to set up as new phone or from back up (my prior question), I'd be so grateful. Am wanting to use backup (as to not lose my texts), but am a bit fearful I could be placing the original problem (frozen during calls) onto the new phone...?

Function (or BAPI, ...) to skip calls and release calls in maintenance plan

Hi, gurus!
We need to find a function (or BAPI, ...) in order to skip a call number in a maintenance plan.
We need a function (or BAPI, ...) to release a call in a maintenance plan, too.
We could use a call-transaction to IP10, but we guess there could be problems with scroll and with pop-up warning messages.
We also thought about using IP30 but there's a problem: if there are previous calls that are not skipped, transaction IP30 releases all those previous calls and we need to skipped them.
Thanks in advance. We really appreciate your help.
Best regards,
J Madariaga

You cannot skip a call in the middle of a list of active calls - this is standard functionality.
Can you please give more info as to why you would want to do this?
PeteA

Skype screen goes white during calls and video calls

Hi,
I'm using Windows 8.1 and recently after the latest skype upgrade I'm getting a white screen during regular calls and during video call while I can talk and hear the other side and on the video call the other side can see me. Important to mention that I see the contact list on the left side.
What should I do in order to fix it? (tried reinstalling skype)
Thanks a lot in advance!

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

When I am on a call and another call come in my iPhone does not beep to notify me of the second call how can I fix this?

Please help... when I am on a call and a second call comes in my iPhone does not beep or make any noise for that matter to notify me of the second call. Why is this happening but most important what can I do to fix this? I have missed several important calls because I have no clue the call is coming in.

Make sure that call waiting is turned on and check with your carrier to ensure that is activated on your account.

Phone call and fax call

Similar Messages

Maybe you are looking for