Phone calls made from phone but NOT from me

Today apparently one of my friends (he was sober) texted me, as well as a couple other friends since he asked them if I was ok, that I had called him, apologized for things, and then hung up. At the time, I was in the restroom, absolutely nowhere near my phone I promise you that. He swears it was my voice and my number since his phone is locked to people not in his contact list. My phone is not connected to Wifi or anything like that. I also have not left my phone somewhere out of my sight, and there isn't any new apps that i did not put on my phone. What could have happened and should i be worried? My phone also doesn't show that I called him. Any help would be great thank you! Feeling so paranoid right now!

iOS: Troubleshooting Messages
Read this article it should help.
Good Luck

Similar Messages

Delete contacts from icloud, but not from iphone

I want to delete all my contacts and calendar appointments from iCloud, but not from my iphone, and i still want to have iCloud turned on in the future.
I have tried to delete the iCloud account from my iphone but when i log in to iCloud.com from a computer the contacts are still there even though i deleted the iCloud account.
How do i remove these things only from iCloud?

I fixed it, i had to turn off the syncing of the contacts and the calendar on the phone and then delete them from iCloud. Obviously if i turn on the syncing of these items again the contacts and calendar appointments will reappear in iCloud.
So problem solved.

Delete Apps from MacBook but not from iPhone

How can I delete Apps from iTunes but not from iPhone 3GS when I Sync them? The moment I delete the Apps from iTunes and then sync iPhone, iPhone deletes them as well.
Please assist.

If you intend to ever sync your phone with your Macbook then you can't delete the app from your Macbook, otherwise the apps will also delete from your iPhone (as you've discovered).

Want to delete mails from Thunderbird but not from the server?

Hi,
Please tell me how to configure the settings of Thunderbird so that if i delete any mail from Thunderbird that mail would be delete only from Thunderbird not from server. I'm using IMAP configuration for all my mail accounts and I'm using Thunderbird in my laptop and tablet both.
Currently i'm using Thunderbird 24.4.0 and i just want to delete my useless mails from Thunderbird but not from the server without using pop-3 settings.
Actually the reason for this Question arises because whenever i use to uninstall and reinstatement Thunderbird, i use to take "profiles" as a back up and its size is increasing day by day that is making a big issue to me as i cant take a back up of such a big size file.

Imap mail accounts keep the emails on the server and you see a remote view of those emails and folders.
When you subscribe to see a folder, the headers are downloaded, when you select an email to read, the entire folder is downloaded to a temp cache facilitating quicker access. If you synchronize folders, then a copy of that folder is downloaded to an mbox file in your profile, so that you have a copy of the server folder. When you make any changes to a synchronized folder, read an email, delete or move etc, then Thunderbird will resynchronize with the server to update the server. A synchronized folder allows you to work in 'offline' mode and this is the best time to perform a backup as you know there is a temporary stop on synchronizing as you are offline. They will resynchronize when you go back into 'online' mode.
So, with IMAP mail accounts, the folders you see in Thunderbird are the same folders on the webmail server. If you make any changes via Thunderbird or webmail then you are changing the same folder. You cannot delete an email without deleting it from the server, they are one and the same.
What you can do is move/copy an email into Local Folders and delete the one on the server. The Local Folders emails are kept in your Profile on your computer, these folders/emails are not on the server, unless you chose to keep a copy of them on the server.
Pop mail accounts cannot see the folders on the server. They only access the server Inbox folder and download emails not previously downloaded to the mail account Inbox in Thunderbird. These emails are kept on your computer in your profile folder. You can select to keep a copy on the server or not. You can choose to delete emails off your computer and off the server or not.
If the mail account is gmail , have you subscribed or even synchronized to see the 'All Mail' folder ? Gmail's all Mail folder is their Archive folder, it keeps a copy of all of your non-deleted emails. So, you do not need to subscribe to see this folder as it only shows you what you can already see in other folders. It doubles the disc space.
Please read section on 'All Mail' at this link.
* http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite
You do not have to download/synchronize the entire folder. You could select to only synchronize the most recent xx days of emails.
see info here:
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_configuring-synchronization-and-disk-space-usage

Full page prints from iPhone but not from iPad using photo app with AirPrint ?

Full page prints from iPhone but not from iPad using photo app with AirPrint ? iPad only prints 4x6 on full size paper. It's an HP 8600.

I also have this problem printing photos from an iPad to an Epson WF-2540 printer. It prints only 4x6 and without border (so print starts at extreme top left corner of paper). Borderless printing is not selected on printer. Printing a square photo just crops to 4x6 size.

I am not able to login to Gmail past 2 weeks, before that I am, But still i can able to login gmail from chrome but not from Firefox

I am not able to login to Gmail past 2 weeks, before that I am, But still i can able to login gmail from chrome but not from Firefox
getting following error
"Oops! Your browser seems to have cookies disabled. Make sure cookies are enabled or try opening a new browser window. [?] "
Please help me

The support article http://mzl.la/1BAQKUb might help you.

Printer will print from ipad but not from laptop.

Printer will print from ipad but not from laptop. No previous problems printing from laptop. HP ENVY 110 series;

Hi Wpbpatfl,
Have you tried running the HP Print and Scan Doctor? It is a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems. Check out the link below for details on downloading and running the tool:
http://goo.gl/8NZ0e
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

TS2621 I can access yahoo mail from safari but not from the iphone ipad mail icon after changing password

I can access yahoo mail from safari but not from the iphone ipad mail app after changing my password

Go into your settings and remove the account. Add the account again with your new password.
Best of luck- K.

Remove songs from iPhone but not from playlist in 7.1

I use iTunes Match and I recently updated my iPhone 5 to iOS 7.1. Before 7.1, when in the music app and I wanted to delete a song from my phone i was able to swipe from right to left and delete the song from my phone but it would still remain in the playlist, only it would now show a cloud icon. Now in 7.1 when i swipe right to left and hit delete, it deletes the song from the playlist (song disappears) I am in and not from the phone, with no way to tehn add it to a playlist. Is there any way to go back to way it previously worked? How do I only delete a song from my phone withput removing it from a specific playlist?

My settings are to show that all music is on and I disagree. I used to be able to delete songs from the phone without removing them from a playlist. Maybe it was before iOS 7 but I def could do it. I would swipre and hit delete and the song would remain but now show a cloud icon.

Application works from NB but not from jar

Hi,
I'am programming a game in JAVA and this going as planned. Everything works when I run it from NetBeans, but when I execute the jar file from the console, then I get hunderds of the same exception.
I really don't know what it is, I see a NoSuchMethod exception in the MouseEvent of the method getLocationOnScreen(), but just as i said, the app works fine without errors from out NB.
Does somebody knows what the problem is?
thx Sven
java -jar Hotel.jar
Loading board images.
Loading image: /Images/bg-patern-hotel.jpg
Opening file /Images/bg-patern-hotel.jpg file exisits: true -- [/Users/svenvanzoelen/NetBeansProjects/Games/Hotel/dist/Images/bg-patern-hotel.jpg]
Loading image: /Images/Main-board-big.jpg
Opening file /Images/Main-board-big.jpg file exisits: true -- [/Users/svenvanzoelen/NetBeansProjects/Games/Hotel/dist/Images/Main-board-big.jpg]
Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: java.awt.event.MouseEvent.getLocationOnScreen()Ljava/awt/Point;
     at Engine.GameAction.setMousePos(GameAction.java:137)
     at Engine.InputManager.mouseMoved(InputManager.java:277)
     at java.awt.Component.processMouseMotionEvent(Component.java:5647)
     at java.awt.Component.processEvent(Component.java:5371)
     at java.awt.Container.processEvent(Container.java:2010)
     at java.awt.Window.processEvent(Window.java:1184)
     at java.awt.Component.dispatchEventImpl(Component.java:4068)
     at java.awt.Container.dispatchEventImpl(Container.java:2068)
     at java.awt.Window.dispatchEventImpl(Window.java:1801)
     at java.awt.Component.dispatchEvent(Component.java:3903)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Same error goes 50 times more.Edited by: Svenmeister on Apr 16, 2010 7:22 AM
Edited by: Svenmeister on Apr 16, 2010 7:22 AM

Ok, I updated my Mac but still got the 1.5.0_22 crap so I changed the function from the mouseEvent to one that 1.5 supports.
But now when I run the application from the console the Exception about the mouse function is gone, but I got another exception instead of it. And this one is I believe not JRE version relevant.
The error is in the loading of the images, at the third PNG image to be precise. The images are now in total 10.8MB in size.
So is this also a 1.6 thing? Would be awesome if someone can explain it.
java -jar Hotel.jar Loading board images.
Exception in thread "Image Fetcher 0" java.lang.OutOfMemoryError: Java heap space
     at java.awt.image.DataBufferInt.<init>(DataBufferInt.java:41)
     at java.awt.image.Raster.createPackedRaster(Raster.java:458)
     at java.awt.image.DirectColorModel.createCompatibleWritableRaster(DirectColorModel.java:1015)
     at sun.awt.image.ImageRepresentation.createBufferedImage(ImageRepresentation.java:223)
     at sun.awt.image.ImageRepresentation.setPixels(ImageRepresentation.java:469)
     at apple.awt.OSXImageRepresentation.setPixels(OSXImageRepresentation.java:66)
     at sun.awt.image.ImageDecoder.setPixels(ImageDecoder.java:120)
     at sun.awt.image.PNGImageDecoder.sendPixels(PNGImageDecoder.java:498)
     at sun.awt.image.PNGImageDecoder.produceImage(PNGImageDecoder.java:419)
     at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:246)
     at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
     at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
     at java.awt.image.DataBufferInt.<init>(DataBufferInt.java:41)
     at java.awt.image.Raster.createPackedRaster(Raster.java:458)
     at java.awt.image.DirectColorModel.createCompatibleWritableRaster(DirectColorModel.java:1015)
     at java.awt.image.BufferedImage.<init>(BufferedImage.java:345)
     at apple.awt.CGraphicsConfig.createCompatibleImage(CGraphicsConfig.java:174)
     at GUI.Board.toBufferedImage(Board.java:1472)
     at GUI.Board.loadImages(Board.java:1143)
     at Engine.HotelMain.switchState(HotelMain.java:86)
     at Engine.HotelMain.<init>(HotelMain.java:57)
     at Engine.HotelMain.main(HotelMain.java:194)Edited by: Svenmeister on Apr 16, 2010 11:01 AM

Can only watch videos from YouTube, but not from other websites.

I can only watch videos from youtube, but certain websites such as dailymotion.com , videos.sapo.pt, etc, the flash video does not load up. I´ve tried updating my video drivers, installing older versions of Adobe flash, but nothing has worked so far. Has anyone has this problem? IShould I be messing with the flash global settings?
Thanks.

Hi, You may want to check the system requirements for the other sites. If you can watch videos on Youtube, then you must have Flash Player Installed properly.
Sometimes certain websites don't support or are late in supporting the latest version of Flash Player (10.1.102.64), so you might want to contact the websites on that.
You can use this link for setting and see if that makes a difference. Normally you would get a popup from the website to ask for this, but that would depend on how you have the Global Settings Panels set up.
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l
Hope that helps,
eidnolb

Airport Express streams Airplay from iMac but not from Windows 7 PC

I have a wireless network set up using a Linksys WRT45G2 v1 router. There is one iMac running Snow Leopard, one laptop running 32 bit Windows 7 Ultimate and one desktop running 64 bit Windows 7 Ultimate. The router is set to WPA2 Personal TKIP+AES security. The Airport Express is set to WPA2 Personal. Its wireless mode is "join a wireless network." It is running firmware version 6.3. The iMac and the laptop are running iTunes 9 and the desktop is running iTunes 10.
Up until recently I was able to stream music from the iMac and the desktop but not the laptop to remote speakers using airtunes via the airport express. Then the video processor in my desktop PC failed and in the course of diagnostic testing I had to reinstall the OS. After replacing the video card and reinstalling the OS, I tried to reconnect Airport Express to iTunes on the desktop PC but Airport Utility could not find the Airport Express. I returned the Airport Express to factory settings and tried again. The PC still did not recognize the Airport Express. I couldn't use the PC to reconfigure the Airport Express, but the iMac did see it so I reconfigured the Airport Express using the iMac. Now I can stream music using Airport Express from the iMac ONLY.
When I use the Airport Utility to scan on the desktop or the laptop PCs it does not see the Airport Express. I can, however, see the Airport Express and read its configuration using Airport Utility on both PCs by using "configure other..." under the File tab (i.e. by typing in the IP number and password for the Airport Express.) Even though I can read the configuration and save it, iTunes does not recognize any remote speakers and I cannot stream music from either PC.
I have tried turning off ALL wireless security as well as all firewalls. I also tried both iTunes 9 and iTunes 10 on the desktop. Nothing makes any difference.
Before I could at least stream from desktop even though I had never been able to get the laptop to stream.
Can anyone suggest a way to get Airtunes (Airplay) to work from my PCs?

I have had the same issue. Airplay working with all devices apart from one windows 7 (the actual media server) and have spent over a week trying to resolve it.
This worked for me.
Turn off windows firewall and in my instance macafee. Be warned while macafee says that it's off there are services running all the time.
You will need to open macafee settings and turn off access protection first
Then search services from start bar
Open services and filter by manufacturer
Stoop all macafee services
Right click the start bar
Open task manager
Stop all macafee processes
Try your airport utility you should now see your express
If you can you will see your icon in iTunes
This pores that it's likely to be a macafee issues. Of course you do not want to leave the firewall off so I installed macafee and installed a fresh copy turning both the windows and macafee firewall on with no resultant issues
Hope this helps

Can send email from iphone but not from mac.

Hi. I'm using a mac desktop and the mail app. I can receive email, but not send. I checked my port and id/pswd and still cannot send. After the app tries to send, it says the server is offline.
I am able to send email fine with my iphone.
Any ideas would be appreciated. Thanks!

I've checked this and mail connection doctor says I am connected - think I am going to have to get someone in to help me as I have spent about 4 hours on this now :-(

Why are Java SASLFactories missing when called via PL/SQL but not from JRE?

Hi
This may be quite a technical point about SASL and JCE Providers etc OR it may just be a question about how Oracle PL/SQL interfaces with Java.
The background is that I am trying to get a Java opensource library to run in Oracle DB - this is for specialized communication from Database to other servers.
The library uses a SASL mechanism to authenticate with the server and this (appears) to rely on JCE Providers installed and provided by the JRE.
I have some Java code working which uses the library - this runs OK in NetBeans/Windows environment and also using Linux/Oracle JRE directly such as:
  +# $ORACLE_HOME/jdk/bin/java -classpath "./MyMain.jar:./OtherSupport.jar" package.TestClient+
However it refuses to work (throws a NullPointerException) when called from PL/SQL.
  +FUNCTION send_a_message (iHost IN VARCHAR2,+
     iPort IN NUMBER,
    +iLogin IN VARCHAR2,+
    +iPasswd IN VARCHAR2,+
     iRecipient IN VARCHAR2,
     iMessage IN VARCHAR2) RETURN NUMBER
   AS LANGUAGE JAVA
   NAME package.TestClient.sendATextMessage(java.lang.String, int, java.lang.String, java.lang.String, java.lang.String, java.lang.String) return int';
In the Java code this is:
   public static int sendATextMessage(String iHost,
     int iPort,
     String iLogin,
     String iPasswd
     String iRecipient,
     String iMessage)
I've tracked the issue down to there being no SaslClientFactories (via Sasl.getSaslClientFactories()) showing when called from PL/SQL whereas 3 are available when run from within Java directly. This via:
   Enumeration<SaslClientFactory> facts = Sasl.getSaslClientFactories();
   System.out.println("Found Sasl Factories [" & (facts != null) & "] size[" & Collections.list(facts).size() & "]");
So, is there some aspect of Java initialisation that I'm missing when calling from PL/SQL (which means SASL factories aren't getting loaded into JRE) or is there something different in SASL setup?
Any pointers appreciated.
Thanks
Dave

Ok, after a bit of reading and general hacking about I have got this working.
What I hadn't initially understood/remembered is that for a Stored Procedure the JVM installed on file system with Oracle isn't actually used - java code is loaded into the database and hence a different set of base functions are available. The following is a good explanation of this http://docs.oracle.com/cd/B14117_01/java.101/b12021/appover.htm#BGBIBDAJ
So "out of the box" the Oracle Database appears to come loaded with only two of the Sun security providers i.e. no com.sum.security.SASL
>
OBJECT_NAME             OBJECT_TYPE     STATUS   TIMESTAMP
com/sun/security/auth/NTSid  JAVA CLASS    VALID   2013-02-14:14:08:57
com/sun/security/jgss/GSSUtil    JAVA CLASS    VALID   2013-02-14:14:08:57
>
This is from:
>
SELECT
  object_name,
  object_type,
  status,
  timestamp
FROM
  user_objects
WHERE
  (object_name NOT LIKE 'SYS_%' AND
   object_name NOT LIKE 'CREATE$%' AND
   object_name NOT LIKE 'JAVA$%' AND
   object_name NOT LIKE 'LOADLOB%') AND
   object_type LIKE 'JAVA %' AND
   object_name LIKE 'com/sun/security%'
ORDER BY
  object_type,
  object_name;
>
My solution (which may well be a work-around) is the following:
1) Downloaded JDK Source and extracted "com.sun.security.sasl" java code to my project
2) Added following code to my Stored Procedure ()
>
Enumeration<SaslClientFactory> saslFacts = Sasl.getSaslClientFactories();
if (!saslFacts.hasMoreElements()) {
  System.out.println("Sasl Provider not pre-loaded");
  int added = Security.addProvider(new com.sun.security.sasl.Provider());
  if (added == -1) {
    System.out.println("Sasl Provider could not be loaded");
    System.exit(added);
  else {
    System.out.println("Sasl Provider added");
>
3) Built my JAR file with the sasl package embedded (note: could only find Java 6 code, so had to comment out some GSS lines - but wasn't intending to use these)
4) Loaded JAR to oracle via "loadjava".
5) Add permissions (only found this out after a couple of failed runs)
>
call dbms_java.grant_permission('XMPP', 'SYS:java.security.SecurityPermission', 'putProviderProperty.SunSASL', '' );
call dbms_java.grant_permission('XMPP', 'SYS:java.security.SecurityPermission', 'insertProvider.SunSASL', '' );
>
6) Run gives the following:
>
Sasl Provider not pre-loaded
Sasl Provider added
...etc...
>
It works!. I confess I'm not sure of the implications of this for multiple calls/performance and if it will need to be added for each stored procedure call - may post back.
For completeness I should point out that after my load the Security providers look like this:
>
OBJECT_NAME             OBJECT_TYPE     STATUS   TIMESTAMP
com/sun/security/auth/NTSid    JAVA CLASS    INVALID  2013-02-15:09:11:36
com/sun/security/jgss/GSSUtil    JAVA CLASS    INVALID  2013-02-15:09:11:37
com/sun/security/sasl/Provider    JAVA CLASS    VALID    2013-02-15:10:03:21
>
i.e. the original couple are "INVALID" !
Dave
Edited by: 946763 on Feb 26, 2013 2:35 AM

How can i delete a website made in iWeb from MobileMe but not from iWeb

The problem is that I have made changes to several pages (almost all of them) on my site and since the changes my site no longer displays correctly in Internet Explorer.
I have looked in the IE CSS file and the CSS file for IE is completely messed up and would take a long time to correct by correcting the code for every page, so I decided just to delete the whole site from MobileMe and then republish it as a new site, rather then as an altered site.
The problem is I don't want to delete the site from iWeb, because it has took me months to build it and I don't want to have to start again. I just want to delete the site from MobileMe, so I can republish it as a new site (and hopefully correct the screwed up code).
So how can I delete a website created in iWeb and published on MobileMe from MobileMe without deleting it from iWeb.
Huge thanks
Jay

Hey thanks for your reply, unfortunately I have already tried to delete my site from iDisk >> Web >> Sites. But it said that i didn't have permission and it wouldn't delete the files.
I am loged in as an Admin and I still cant delete them
Thanks again
Jay

Emails delete from iphone but not from my pc?

Hello all,
I have been noticing a problem lately but sadly cannot put my finger on when it started to occur because I was not paying enough attention to the details until it was too late.
I have an iPhone 3GS with all the latest updates and such. I have a personal Yahoo! email account set up on my phone as well as my university Outlook email. This is an "outlook live" email that I access by going to outlook.com on a computer, not the kind of inbox that you have to download. I receive new emails from my Outlook account on my phone with no problem, but when I delete emails from my phone, then log on to my email on a computer, the emails are not deleted. I do most of my emailing from my phone, so I was shocked to log in to my email on my pc one day to discover that I had 132 emails even though I had deleted nearly every single email that I received. This appears to have started abruptly. I have had this account set up on my phone for many, many, many months and have not had any problems. I haven't changed my password or anything like that... Has anybody else experienced this problem and how did you fix it?

This is possible with one of two ways.
With an IMAP account that is accessed as an IMAP account with the iPhone's Mail app and the same with an email client used on your computer for accessing the account. If you don't use an email client on your computer for accessing the account, this will work when accessing the account via webmail access using a browser on your computer.
It is possible to access a Yahoo account as an IMAP account with the iPhone's Mail app but it is not possible to access the account as an IMAP account with an email client on your computer. Yahoo doesn't support accessing a Yahoo account as an IMAP account with an email client on your computer.
With a POP account along with the setting for the account on the iPhone to remove messages from the server after being downloaded when moved from the account's Inbox mailbox or in 7 days after a message has been downloaded.

Phone calls made from phone but NOT from me

Similar Messages

Maybe you are looking for