Phone can't connect to jawbone with iOS 4
Hi,
I have a weird problem since upgrading to iOS4: I cannot connect to my jawbone headset anymore. My 3GS cannot even see the headset. There were no problem in doing so with 3.1.2, but I have no luck with this anymore since the upgrade.
Anyone who has an idea what to do with this or is there just the possibility of waiting for Apple to repair this?
Regs, Michael
Works! I just paired my iPhone 4 withe the Jawbone Icon. I went to the Jawbone website and followed their instructions for repairing the headset with your phone. I am copying their instructions below:
Follow these steps to put the Jawbone ICON in pairing mode.
1. Start with the headset OFF (slide the power switch to OFF, the position where you cannot see the blue indicator).
2. Press and hold the TALK button
3. Slide the power switch ON.
4. Wait for LED starts to flash red and white.
5. Release the TALK button.
The headset is now in discovery or pairing mode. On your iPhone, go to the Bluetooth settings and search for (or add) Bluetooth devices. When found, select Jawbone ICON. When prompted for a passkey, enter 0000.
Note from scn: I didn't have to enter in the passkey. I followed the above steps and the phone immediately paired. Perhaps the old passkey was kept from my old iPhone 3G when I updated to the iPhone 4.
Similar Messages
-
I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards
ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1 -
Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?
can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?
According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6. Only iOS 5 and below.
http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1®ion_id= 1&tab=howto#/howtoTab
Sony wrote:
Are the headphones compatible with the Apple® iOS®6 operating system?
Solution
The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
Region
Canada
United States
Products
MDR1RBT
Last Modified Date:12-05-2012ID:C1032819
You can still try though, but there's no guarantee. -
How can i connect iphone 4 with other mobile through bluetooth
how can i connect iphone 4 with other mobile through bluetooth
You can't. iPhone does not have this feature.
Some iOS apps will allow you to connect to other iOS devices for peer-to-peer games, or sending photos, but not to other makes of phone. -
HT4623 How can i solve installation problem with iOS 6.
How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!
can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs -
How can i connect iphone 5 with izon wireless camera?
Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken -
HT1414 i can't complete the iphone with ios 6 my car is not valid and what should i do ?
i can't complete the iphone with ios 6 my car is not valid and what should i do ?
Try rephrasing your question.
What does your card have to do with it and how do you complete a phone with ios 6?
What exactly are you doing, and what is the exact message you're getting? -
Can't connect to itunes with iphone and followed all toubleshooting problems!!
can't connect to itunes with iphone and followed all toubleshooting problems!!
Try taking a look at this Apple doc -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
It should be able to help with that error. -
Can't connect to wifi with my iPad
can't connect to wifi with my iPad
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HT4972 can't connect to network with linksys e2500
Can't connect to network with linksys E2500. Can anyone help me?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
how can i connect my iPhone with my pc !! still my swipe is not working but my pc ask to accept device on iPhone!!!!
Now all my new apps as well as several others are gone from the iPhone.
Look on other screens. The 4.1 update ands Game Center to the home screen. If that screen was full it create a blank screen and moves one app from the home screen to the new screen to make room for Game Center. All the other screens are pushed back one place.
How can I get my apps back? It cost me a lot of time and money to discover those apps and get them onto the phone. Are they just gone now?
If they are really gone, you can download them again. You will not be charged again if you use the same iTunes account. -
HT4623 how can i connect my iphone with my pc
how can i connect my iphone with my pc
Use the USB Cable/Power Cord supplied with your phone. Attach the USB connecter to your pc. Open iTunes, if it doesn't automatically open, and select your device when it appears in the left-hand column.
Cheers,
GB -
How can i use "icloud backup" with ios 4.2.1?
How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.
You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1 -
I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?
No.
If you don't want to update to the supported software you can't use the device. -
Can I connect two macs with thunder bolt ?
can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
thanks for any helpYou can connect the two. Whether you can use VNC, I have no idea.
http://store.apple.com/us/product/MC913ZM/A
Ciao.
Maybe you are looking for
-
We have a pdf document which contains links of the format appname://some/path. This is using Windows Asynchronous Pluggable Protocols which we have defined in the registry so these links should launch the application with the path as an argument. If
-
How to persist TextInput text values?
Can anyone provide a brief explanation of how to persist text values? Description: Stuff written into a TextInput field does not persist when moving to another frame, and back again. Example: Frame 1: Put a TextInput component on the stage. Frame 1:
-
Horizontal Bar when equal or under 1024x768 in 4:3
Hi everybody, I have used a width of 1012px for my header, container and footer. I can't think of another element that might be affecting the total width of the page. The problem is that when I view the page in 4:3 monitors that use 1024x768 resolut
-
When I control-click on a picture and go to 'Open With', I have way too many options... Is there a way to add and remove the options on this list?
-
REG: Additional excise Duty
Dear , Guru's can any body tell me how to set off the AED which is paid to the vendor while procuring material, To the recieving plant while doing Stock Transfer , so that it will be appeared in the invoce. pl do the needful Thanks and Regards Sunil