Phone Charge reduces even when connected to USB
After lollipo update which is just awfull, when i connect my phone via USB its seems to lose charge rather than gain battery.
This is just absolutely rubbish. Sony do you even read the forums, plesae resovle this.
Are any other users also geting this issue. Please raise this defect as well. Also any suggestions will be welcome.
hassanff9 wrote:
After lollipo update which is just awfull, when i connect my phone via USB its seems to lose charge rather than gain battery.
This is just absolutely rubbish. Sony do you even read the forums, plesae resovle this.
Are any other users also geting this issue. Please raise this defect as well. Also any suggestions will be welcome.
Hi Hassanff9,
Initially, i have that problem after i updated it OTA. but i did a hard reset and reinstall everything, so far this works for me.
If i may suggest you to try to do a hard reset as well to see if it works for you.
Aside from this, you may also want to check if there is any specific app that is still active on background and most likely thats the cause the the battery drained faster then charging when is plugin to a charger.
I can accept failure.... I can't accept not trying - Michael Jordan
Similar Messages
-
How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos
Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.
-
Hello, my iPhone charges when I charge it with the wall plug but not when connected to a computer via USB and my iTunes doesn't recognize my iPhone either. iTunes recognizes my iPod and iPad just fine. I have been to Apple iPhone support page and I have restarted my iPhone, the computer, tried different USB ports, etc. I have also tried my iPhone on different macs even with different versions of iTunes and no luck. This all started when I was cleaning out some lint from the usb connector, could I have damaged some part of the docking connection? But why does it charge with a wall plug then?
I fixed the problem. When I was trying to clean the connector of the iPhone I must have bent some pins. I have straightened them to the best of my ability and now it syncs. If your iPhone charges, but doesn't sync, most likely you have a similar problem, because the iPhone doesn't need all of its pins to charge, but it does need all of them to sync.
-
Can't charge my iPhone when connected to USB 3.0 hub
Can somebody tell my why ? I have tablet and there is only one usb 3.0 port so that is why i need to connect to usb 3.0 hub
And whn iphone is connected directly to tablet usb 3.0 then the charging works but message pops in iphone that ; This cable or accessory is not certified and may not work reliably with this iPhone .. ?!? but all works OK ? when i had 6.1.4 software never experienced this problem ... Once I updated problems started !?!?!?Hello Ethos Evoss
Check to make sure that the usb hub is a powered one, if not then it may be drawing to much power causing the alert to come up that you are seeing. The article below will explain further about charging issues and how to troubleshoot them.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G. -
Why can't see iPad when I am in iYunes even when connected by USB?
I am in iTunes and have connected iPad via USB - there is a small iPad icon on top toolbar but when I click it it diappears. There are notes in this forum about viewing the iPad contents on left column of screen but I have no left column visible. Can anyone help?
http://forums.adobe.com/message/4915932
-
My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :( -
HT1688 My iPhone 4 will not turn on even when connected to a charger?
My iphone 4 is dead. Will not turn on even when connected to a charger. Have tried simultaneously pressing the wake/home buttons to no avail.
Hello fredswolf,
Thanks for the follow up and additional information. Based on the information you have provided, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M. -
HT1688 my iphone just completey shut off, and wont come back on, even when connected to the charger
my iphone completely turned off and will not come back on, even when connected to the charger. how can i turn it back on?
Hello ozzy9294,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Best of luck,
Mario -
1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance..."I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif! -
Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?
Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Battery charge percentage diminishes when connected to mains?
Hello,
I am not sure if I am right or wrong but I think there might be something strange with my Macbook Air.
(11", core i7, 250ssd, 4gb ram).
Every time the laptop is connected to the mains, the battery percentage starts dropping.
For example, last night the laptop was fully charged to 100%. After that, I shut down the system, I waited till it was shut down completely and after that I unplugged the cable as well (It was not in sleep mode).
Now in the morning when I plugged back the cable to the mains, I turned it on, and voila, it is was on 99%.
Am I doing something wrong? It is happening all the time, till the point that the battery drops up to 94% and starts charging again up to 100%.CranberryJuice wrote:
But why would it need the power from the battery to start up? If it's connected to the power outlet?
The % drops even when connected all the time to the power outlet.
Thanks
The power adapter can not supply the power required when the processor is under a heavy load. It gets the difference from the battery. That is why the the older versions of the MacBook Pro dropped to half speed if they were run with the battery removed. An MBA battery is not removeable but the same underpowered power supply problem exists. It is a notebook that is intended to be operated from the battery. It is not a desktop replacement.
The power supply was designed to charge the battery. It would have to be larger (more expensive?) to charge the battery and also run the cpu at full load. -
Why isn't my iPad2 charging its battery when connected with my iMac?
Why isn't my iPad2 charging its battery when connected with my iMac?
A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.
-
ipod touch completely unresponsive. will not turn on at all even when connected to power source. is it dead????
After charging for at least an hour reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connect the iPod to your computer and see if iTunes sees the iPod. If it does try restoring the iPod via iTunes. If it is not visible try the following to make it visible:
--- Place it in recovery mode via:
iPhone and iPod touch: Unable to update or restore
--- Place in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iphone 4 is not switching on even when connected to pc
Hi i just dont know what happened my iphone 4 is fully charged but it suddenly switched off and was mot respomnding even when connected to pc.
kindly give me a suggestion...................no it says an error has occured when syncing iphone, but there is an improvement now with sync cable and itunes symbol
-
Will not recognize the Lucid LG when connected with USB
My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?
That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Hi, I forgot my security questions and I don't have a rescue email setup. I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries
-
Communication between Java and Oracle
Hello, I have replicated databases running 9iR2. Once insert/update/delete transaction is commited by replication(master site, backend server), notification needs to be sent to front end server (eg rowid and tran type update/delete/insert) Upon inser
-
Can't access Desktop from Import menu
When on the import menu, the Desktop tab on the left hand side has a little buffer symbol next to it and I can't click on it or access the files to import them. This also happens on iMovie. Does it have something to do with my hard-drive?
-
hi every bady, Any one can tell me how can I import an excel file to LabVIEW 8.6 ?? I need to read it and make some treatements on it on LabVIEW ! Thanks Solved! Go to Solution.
-
Printed copy of ADF Developers Guide
Can anyone provide the link to purchase the printed doc for 10.1.3 ADF Developers Guide? I'm interested in both the TopLink/EJB version and the ADF-BC version. Thanks.