Phone dead after software update failure - Error symbol

I updated my BB device software, but the update process froze at the very end when the device is supposed to initialze. Now, when I turn on the phone, all I get is an error symbol looking like a crossed out application symbol with the number 543 underneath. When I plug the USB cable in, the computer recognizes the phone and desktop manager finds it as well, however I cannot connect to the device.
Urgent help needed!
Thanks.
Solved!
Go to Solution.

LarsLondon wrote:
I updated my BB device software, but the update process froze at the very end when the device is supposed to initialze. Now, when I turn on the phone, all I get is an error symbol looking like a crossed out application symbol with the number 543 underneath. When I plug the USB cable in, the computer recognizes the phone and desktop manager finds it as well, however I cannot connect to the device.
Urgent help needed!
Thanks.
Error 543 is an OS error. Follow this link to resolve it. If you need any additional help, post back with any specific questions.
If you find a post here helpful, please consider giving the poster some Kudos

Similar Messages

Nokia E52 dead after software update using Nokia S...

I bought my Nokia E52 the day before yesterday. It is an early model (arrived at the store i September). But it worked fine, except for the bluetooth connection.
I tried to update the software using Nokia Software Updater via the USB cable. But it lost connection (I didn't touch the cable nor the phone at the time, and the computer was workning fine). After that I tried it again a couple of time, but it lost connection. It seems the USB-micro connecter on the phone is defective.
Finally its seemed to worked, but after a long period of time it lost connection again and this time the phone was dead. The computer couldn't find it when I connected the USB cable and the screen was dead, nothing happend when I push the powerbutton, except it vibrated once as normal after that nothing happend.
The screen was dead, the numberpad was not lighted. I removed the battery and waited a couple of minutes and tried again. Nothing happend. I tried to reset the phone by using buttons '3', '*', 'anwesring-bottun' and powerbutton. Nothing happend.
Obvious the software update were unsuccesful but is my phone beyond repair? Is the warrenty/guarantee still valid?

Your phone will be repaired in a nokia care point. Usually they fix this problem whenever it occurs during a software update. If that key combination didn't help in your case, then it's definitely a point to go to a care point. I think it is covered by warantee but I'd advise you to call the service point just in case to check with them.

Nokia 301 dead after software update

I just updated my Nokia 301 from its software version 2.something to the latest (8.03 I believe). After the update process the phone is dead. It won't start up, nothing.
Is there anything I can do?

Beck_DK:
we are investigating your report about Mail for Exchange.
pbomta:
Nokia 301 does not support SW updates via Nokia Suite (like all the more recent phones), so that would be the expected result.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

IPhone 4S went dead after software update

My iPhone 4S is telling me to connect to iTunes after latest software update. I can't do this as my laptop is not working at the moment. Any ideas on what I can do

The same happens to me. It don't work in my phone the apple logo does not appear.. I tried to do a hard reset to my phone because it was frozen and now it seems like the phone is dead.. need help please..!!

Dead after software update

I noticed after work tonite the software update shortcut was up with needed updates. I told it to do it and noticed later it has shut down, not restarted. I started it back up and it made it thru the tone, grey screen with apple and swirl thing and shut down.
I tried it again watching the lights.. same thing no code flashed just stopped
So... I tried resetting everything on the board
This time the monitor dropped out before the computer shut off.. ahaa reset video card again.. cured... no.. now no monitor at all no chimes either no code either
One more time..No lights no tones no monitor so I let it go and the dreaded fans slowly climbing to high speed began, shut off and started typing this on my pc.
Main board right?
how do I verify?
Best place to get a replacement board? Man this is a drag.... Cant afford a new mac
Please any help?
Thanks Kurt

See if you can Boot off your original G5 Install Disk while holding down Option/alt key to select AHT, then run the extended Apple Hardware Test.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions. (Well, the Installer actually uses superuser Permissions to do it's work, but after reboot it doesn't guarantee communication with other existing needed files Permissions.)
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

HELP ASAP! Crashes after Software Update Failure.

Last night, used Software Update on iMac to update to Safari 5.0.4, Mac OSX 10.6.7 (OS is now 10.6.6), Java for 10.6 Update 4 and iTunes 10.2.1. It took a long time to Update--about 30-45 minutes--was at "putting things in their place" (or whatever) stage, then Update unsuccessful. Tried again this morning but only updated Mac OSX. Same thing happened.
Safari works, Word works but Pages does not. Also get WebKit and Flash plugin fail messages. Computer is very slow.
Ran Disk Repair from Application-->Utilities. Must Repair Disk. Started up from install disk, ran Disk Repair, got "Invalid Node Structure/1 volume could not be repaired because of an error" message.
Restarted on OSX 10.6.6 and did Hardware Test: No Problems. Shut down and Restarted on 10.6.6. Restarted a few more times just for good measure. Same thing happening.
Big project due for work tomorrow--of course everything is in Pages.
I have a WD Passport External back-up which I've never had to access. Can I get my Pages files to at least print out from the back-up?
What do I need to do to fix Invalid Node Structure? Please, please HELP!

I have a WD Passport Back up and it auto backs up every 30 - 60 minutes (can't remember what I set it at). I have Time Machine but haven't turned it on because I thought it might conflict with the Passport. I just tried to open the Passport and now it, too, is crashing.
Would turning on Time Machine mess things up if Passport is still working?
I did figure out a few ways to retrieve content from Pages. Attach the file to an email and mail it to someone who also has Pages. (My husband does but I think it's a diff. version because he can't ever open pages files I email to him.) The other way is to highlight the file in the folder, go to Finder-->File-->Quick Look. It will open a window with a readable version of the file, however you can't do much else with it--like print it. I took a screen capture of my file and then printed it out. Eureka!
But my computer is still screwed.
Thanks for all of your help! Let me know about turning Time Machine on.

IMac DEAD after software update!

HELP! I have a new-ish (january or so) aluminum iMac, worked perfectly up until the recent software update to Leopard v. 10.5.3... after the update, it began spontaneously restarting. I could only use it for a brief amount of time before it reset itself again (and usually getting stuck with applications 'Not Responding' until then). I ran the latest iMac Firmware Update, thinking maybe that would be the solution, but it only made things worse (stupid). With each reboot it got worse, and eventually got stuck in a restart loop, making it to the blue screen and rebooting before reaching the desktop. I unplugged it to let it rest a bit, plugged it back in a couple hours later, and NOTHING. no response to the power button. NOTHING. Now I have a $2200 paperweight until I can get some kind of help on this..
fwiw, no problems post-software update on my 1&1/2 year old macbook...

Ok, here's my latest... I've got it back running again (for now, and hopefully for a while).
I did something similar to what the earlier poster said. hit the power button (the cd drive made it usual noise for a few seconds) then held the power button (i.e. cycled it off), then hit the power button again... it took a couple times but I heard the apple boot sound (whatever that's called) and it booted.
I actually had to do it again cause the machine got stuck in that reboot loop again before I could do the SMC reset but the second time I was quick enough to do the shutdown.
So far it's been up for the last 8 minutes or so...

N82 dead after software update

Good evening,
I was just updating my phone via the nokia suite, when my computer suddenly restarted.. After this incident I have been unable to power up my phone, and I fear the worst..
Is there any way to fix this, apart from turning it in for a service?
-J

First remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode.
If not disconnect it and try a hard reset.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

Does the Ipod see the network?
It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the antenna. See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

"Software Update Failure - an error occurred installing i0S6."

I tried to update my iphone 4 through my settings and got the error "Software Update Failure - an error occurred installing i0S6." This is not the first time that happens. I got the same error in the last 3 ios updates. The only way that I found to solve was to update by itunes, but as we have the option to update through iphone, I want to do that.
Any suggestions on how to solve this problem will be most appreciated.

In the last 3 ios updates I had to use itunes because through the settings I always get the same error message. The point is that I don't want to use the itunes. I want apple to fix the problem (as I can see I'm not the only one having problem). I have 2 friends that did the update in the same time that I was trying to do, and for both them it worked.

A big deal of data lost after software update

Hello,
Hopefully someone will look into this problem. I have seen also here other reports of losing data after software update.
I have a Nokia N73 Music Edition. Before I updated the firmware, I used Nokia PC Suite to backup all data in the phone memory as well as the phone settings. After a successful update, I tried to restore the backup. No error occured during the restoration. However, I found out many things hadn't been brought back to my phone, such as messages, notes, as well as landmarks that I saved in Nokia Maps.
I want to know what is going on and if there is any hope to get back those lost pieces. Thank you!
Best regards,
Wei

Sorry if your husband didn't backup your phone either to iTunes or icloud prior to updating your phone, then those data is gone.

P1i dead after running Update Service - any suggestions

Hi
My P1i appears completly dead after running Update Service. I've tried removing the battery, fully charging the battery etc. When i run Update Service again it just says my phone is up-to-date.
any suggestions?

Unfortunately, in this case, we would only be able to suggest sending the handset for service. Usually when running the Update Service, you should get the option for EXIT but also for INSTALL when you are advised that you have the latest software. If you do not have this, the handset may need to be flashed by an engineer.
If you wish to do this, I'd recommend contacting your local support team to be advised of your nearest service location. Contact details can be found here:
http://www.sonyericsson.com/cws/corporate/common/contact

E50 after software update!!

Hi
Wanted to ask if anyone hada camera problem after the software update.
Error message i get is general: Feature not supported,
It used toi work fine before the update.
thanks

Yes, I updated my friend phone, then he took it to NSC, then they fixed it.
reseting the phone didn't help at all.
Abdullah Ibn Hamad Al-Marri AKA Awesome
Arab Portal
Phones: Waiting for E9x with Scheduled SMS on it, and 9300i features..

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

Phone dead after software update failure - Error symbol

Similar Messages

Maybe you are looking for