Phone Designer and InformaCast???

I am trying to use Cisco Unified Phone Designer 7.1(3) with my 7975 and CUCM 6.1(4).  we also use InformaCast 6.
InformaCast requires that the phones use the InformaCast server for authentication.  However, I find that when the phone has the IC URL for authentication, I get "Unknown Error" when I attempt to upload a wallpaper or ringtone to the phone.  It works fine when I change the phone to use the standard CUCM Auth URL.
Is there any was to maintain the IC URL and work around the authentication issue?
Any help is appreciated!!!

In informacast under telephony configuration, there is a URL you need to enter for the "next authentication URL".  that should be something like below.
http:// ip address>:8080/ccmcip/authenticate.jsp
Did you set that?
So if you have informacast set as your url authentication in CUCM and informacast recieves a authentication request not meant for it, then it will forward it to the url specified in "next authentication URL.  Hope this helps and please rate, thanks.
Jason

Similar Messages

  • Phone design working - updated site now not redirecting

    Yikes!  Just when I thought I was done.  I had mad a desktop web site and and temporary phone site for a client and had it FTP to my server.  I finally finished the phone design and reloaded the site and now it says "under construction" on my iPhone 5s.  Any clue?  I did add page properties to each file on my phone with the google analytics code.  Could this have messed it up?  I am lost - and very tired. I don't want an upset client.

    I didn't know how to add to the above but when I went to my server site I looked over my files.  The index has an .tpl extension. So do all the phone pages.  My site is www.aliciastecklercounseling.com.  I am heart broken.  I tried loading the entire site again.  Always when I have deadlines something goes wrong.  Any suggestions anyone???

  • Hands up for anyone who loves the present iphone design and just want the phone to get better, but look same.

    i luv da iphone 4 and 4s design and want apple to keep da same design for iphone 5

    Neither conjecture nor polls are allowed here. Sorry. (Normal English is recommended also. Not every country in the world may be able to translate "luv" and "da")

  • I updated my iPhone 4S and my iPad 4 to iOS 7 now they both drop all my contents all my notes go missing I keep having to turn it off and on sometimes several times to make a phone call and the scroll rarely works is there anything I can do?

    I updated my iPhone 4S to iOS 7 now my phone constantly deletes all my contacts and takes days to download them from my iCloud again, constantly needs to be turned off and on sometimes several times to make a phone call, the scroll rarely works, is there anything I can do, the apple tech told me it was something I'd just have to get used to, my phone worked perfectly before the update.

    Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
    It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality.

  • Creative Suite 6 Design and Web Premium will not Reinstall: Says Serial Number is not "Valid"

    Chat support has been no help.  I uninstalled Creative Suite 6 because I was having issues with some of the software and hoped that a reinstall would solve the problem.  Now the software will not reinstall.  It takes me to the validation screen where it asks for the serial number and says "We are unable to validate this serial number for CS6 Design and Web Premium.  Please contact customer service," when i type the serial number in.  I have now gone through THREE chat sessions with "customer support" in which they have sent me a link to download the same program, and it would not reload because of the serial number, and then have walked me TWICE through a multitude of tasks that have not solved the problem.  They keep asking me the same questions again and again, ignore my own questions to them, and cannot give me any information that actually helps.  The phone system will not support Creative Suite.  I NEED this software to reload as I've already missed one publishing deadline and will miss another if I cannot use this software, which, at the moment, seems to be a $350 coaster.
    This is the same disc I used to install the software originally.  I installed it on my old laptop and used it there without incident until my new laptop came (a period of about two months).  I then Uninstalled the software from the old lap top and installed it on the new one, again, without incident.  When I found that the icons for switching between tools in Photoshop and Illustrator were so small I could not see them, and they seemingly could not be adjusted within the program, I uninstalled the software, and at this point is when the software would not reinstall on the same computer it was on in the first place.  My software is official, on a physical disc, and registered to my account with Adobe.  What do I do?  I just opened this press five months ago, and I cannot justify a Creative Cloud membership with the amount of work I'm actually putting out at the moment, and especially not with the terrible customer service I have been receiving so far.
    Please help.

    If you never deactivated, and neither did they, then that is likely to be a reason for not being able to activate again.  Contact them thru chat and ask them to reset your activations.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How to reuse standard Activity subcomponents - Appointments, Tasks, Phone Calls and Emails within a custom work center?

    Requirement : We have a requirement to reuse the standard Activity subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work centre. The requirement is to leverage and copy all sub functionalities Appointments, Tasks, Phone Calls and Emails available within the standard activity work center. This feature is available within Accounts, Opportunities, Leads etc. (Refer screenshot: Std_Act_Screen.jpg)
    We are unable to consume/embed the standard Activity (Work center) sub components Appointments, Tasks, Phone Calls and Emails within the custom work center. This is because of backend consistency check violation UI designer error message displayed. (Refer screenshot:Error while consuming standard activities.jpg)
    Ø  Open Question:
    a.      Is there a limitation to consume/embed the standard Activity (Work center) subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work center?  We have noticed that this standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails has been repeatedly reused within the application in Account, Opportunity, Sales lead, Lead, Sales Quote Objects.
    b.      Is there an alternative way in which we can call [Through API etc..] the standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails?
    We need your guidance to overcome the error to enable the reuse of the standard Activity Work center sub-components Appointments, Tasks, Phone Calls and Emails within our custom work center or suggest a suitable workaround on how this can be achieved.
    Regards .. Dheeraj Saini

    Whenever you find out let me know. I wanted to assign a text tone to someone and now in iOS 7 i can't. Or I haven't figured this out yet.

  • HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

    I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
    Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
    How do I rectify
    Paul

    you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
    Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
    It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
    But, I haven't tested this with a BT product...and I suppose anything is possible.
    Still, I would be extremely surprised if this worked.
    The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

  • Can I install Phone designer for all user?

    Hi
    I have phone designer application I install it on my PC but when I install it for anther user and give me error Unable to connected to server.
    Is there any parameters needs to check on CUCM?
    How many times can I install it?
    Thanks
    Kaff

    You can install it as many times as you want. Ensure that either the cluster-wide parameter or the device-specific parameter is set to allow phone personalization. After that, if it works for you it will work in general; don't forget to enter the CCMCIP server address in the client.

  • Help! When I try to reinstall CS6 Design and Web Prem i get message that my serial number is invalid

    When I try to reinstall CS6 Design and Web Prem i get message that my serial number (Design and Web Prem <serial number removed>) is not valid? Why???? I have it installed now on just one computer only. It was installed also on a computer and a laptop. The laptop crashed and couldn't restart anymore. I had to through it away. After that I installed on another computer at a place where I work sometimes with photoshop. Then suddenly I got message at my computer home that the serialnumber is invalid. I installed for the time an try out version, and now I have deleted the version that I had on the computer but when i want to reinstall my legal bought version with the serial number that i mention there, I get again the message that my serial number is invalid. But now it is only installed on 1 other computer. If I check the sites, I have to contact Adobe but I don't know how. The link does not work and I cannot find any phonenumber.!!

    If you had it on a laptop that crashed and you threw away, it is still considered as activated on that machine.  YOu should contact Adobe by chat or by phone and have them deactivate for you.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/
    If you are getting a message that indicates the serial number is not valid, you should look thru the following:
    Error "The serial number is not valid for this product" | Creative Suite
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  • Error on Phone Designer Application ver 7.1(3) SR2 & CUCM 8.0.3

    Dear Cisco Expert
    I am using CUCM 8.0.3 and I am using Cisco Phone designer 7.1(3) SR2 I could not push the image fom the phone designer
    Its giving error as Personalization is disable on the selected device
    It did check on my CUCM its enable but still its showing the same error , Please give me a step by step guide I need to be solve Thanks in advance

    Hi Rob Pyke.....
    had the same problem and had to go to Device- Device settings-Standard common phone profile and change the Phone Personalization to "enabled".  I rebooted the 9951 I was working and taadaa it worked.
    your discussion will solve the issue,..?
    which CUCM version your are using...?
    i have 8.0.3a with firmware 9.0.3s have the problem...
    i only need to test the one you mentioned, but if i done this all the phones will be restarted right...?
    good day..............

  • Phone Designer Error

    Hi,
    I'm trying to use Cisco Phone Designer on my 6.1(2) CUCM Cluster. I did several tests, but the program fails every time with the same error: "An unknown error occurred on your Cisco IP-Phone".
    I made a complete check of the config:
    - IP-Phone "Phone Personalization" parameter: Enabled
    - User associated with the Phone
    - Username/Password tested (with ccmuser) successfully
    - Phone Firmware: SCCP41.8-4-1SR2S
    So I suppose the config is ok.
    If I look on the application log files I find this error: 'CiscoIPPhoneError Number="4"'
    Is this maybe a bug? Someone of you is using Cisco Phone Designer on CUCM 6.1 successfully?
    Thanks for your replies.
    Gio

    Ciao Michael,
    I've tried to trace the error following your suggestion. Here below the output of the trace during a 'Ring Tone change' test:
    009-04-20 14:12:40,250 INFO [http-8443-Processor23] servlet.Personalization - Personalization Servlet doPost invoked !!!
    2009-04-20 14:12:40,585 INFO [http-8443-Processor23] servlet.Personalization - XML command from PC (as regular request) :HiddenUsername@HiddenDomain
    2009-04-20 14:12:40,586 INFO [http-8443-Processor23] pc.RequestHandlerMapper - Forwarding request to ControlledDevices handler
    2009-04-20 14:12:40,587 INFO [http-8443-Processor23] log.LoggerTag - ControlledDevices.jsp begins, remote=10.5.231.77, from forwardInfoBean userId=HiddenUsername@HiddenDomain password=HiddenPassword xmlCommand=HiddenUsername@HiddenDomain
    2009-04-20 14:12:40,623 INFO [http-8443-Processor23] log.LoggerTag - ControlledDevices.jsp 10.5.231.77 HiddenUsername@HiddenDomain HiddenPassword controls 2 devices
    2009-04-20 14:13:04,505 INFO [http-8443-Processor6] servlet.Personalization - Personalization Servlet doPost invoked !!!
    2009-04-20 14:13:07,126 INFO [http-8443-Processor6] servlet.Personalization - XML command from PC (as multi-part request) :SEP001819A89B15DesignerRingtone
    2009-04-20 14:13:07,164 INFO [http-8443-Processor6] servlet.Personalization - Added device {SEP001819A89B15} to pendingRequests queue
    2009-04-20 14:13:07,185 INFO [http-8443-Processor6] servlet.Personalization - saved /usr/local/thirdparty/jakarta-tomcat/webapps/ccmcip/personalization/HiddenUsername@HiddenDomain_SEP001819A89B15_tone_DesignerRingtone
    2009-04-20 14:13:07,185 INFO [http-8443-Processor6] pc.RequestHandlerMapper - Forwarding request to SetRingTone handler
    2009-04-20 14:13:07,186 INFO [http-8443-Processor6] servlet.SetRingTone - servlet.SetRingTone::doPost begins
    2009-04-20 14:13:07,409 INFO [http-8443-Processor6] phone.SetRingToneRequest - XML command sent to phone : XML=http://10.6.24.20:8080/ccmcip/GetRingTone/HiddenUsername@HiddenDomain_SEP001819A89B15_tone_DesignerRingtone
    2009-04-20 14:13:07,537 INFO [http-8080-Processor21] log.LoggerTag - authenticate.jsp begins, remote=10.5.231.105
    2009-04-20 14:13:07,539 INFO [http-8080-Processor21] log.LoggerTag - Authenticator.jsp included in authenticate.jsp, remote=10.5.231.105, params: UserID= Password=HiddenPassword devicename=SEP001819A89B15
    2009-04-20 14:13:07,540 WARN [http-8080-Processor21] log.LoggerTag - Authenticator.jsp ends, remote=10.5.231.105 UN-AUTHORIZED params missing
    2009-04-20 14:13:07,622 WARN [http-8443-Processor6] servlet.SetRingTone - Uploaded ring tone file has not been downloaded to phone
    2009-04-20 14:13:07,624 INFO [http-8443-Processor6] servlet.SetRingTone - deleted /usr/local/thirdparty/jakarta-tomcat/webapps/ccmcip/personalization/HiddenUsername@HiddenDomain_SEP001819A89B15_tone_DesignerRingtone
    2009-04-20 14:13:07,625 INFO [http-8443-Processor6] servlet.Personalization - Device used by thread : http-8443-Processor6 current thread : http-8443-Processor6
    2009-04-20 14:13:07,626 INFO [http-8443-Processor6] servlet.Personalization - Removed device {SEP001819A89B15} from pendingRequest
    As you can see at the beginning Phone Designer program applies correctly user credentials (and discover for example that this user control 2 devices), but then in a second phase, when it tries to send the new ringtone, the UserID parameter is EMPTY
    Why?
    Do you have still some suggestions for me or you think it's time to open a TAC request?
    Thanks again for your help.
    Rgds, Gio.

  • Design and Web Premium won't update

    I am trying to update a few computers on our closed network to 16.0.5 for Illustrator and 13.0.1.3 for Photoshop CS6.  I have been able to update other computers with different CS6 suites on them, but Design and Web Premium won't allow me to install the updates.  Are there different patches for this program?  If not, what do I need to do to patch these systems?

    It sounds like maybe you are trying to install an upgrade version.  To do that you need to either have the version from which you upgraded installed or you need to have the serial number from that version.  If that is not the case, then you need to explain a little more regarding what your problem is.
    If you need to contact Adobe Support either by chat or via phone, Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Maximize Code Reuse Between Windows Phone 8 and Windows 8(via Microsoft Dev Center)

    Win8 App Developers: Picked this up on the Microsoft Dev site..great tips for reusing code between your Windows 8 app and Windows Phone.
    Summary: In this section, we will help you make the right choices to maximize code reuse in your apps. As a developer, you want to streamline your development and make maintaining your apps as efficient as possible. By working smarter, you give yourself more time to develop more apps and fill the marketplace with your creations. When building an app for Windows Phone 8 and Windows 8, you should look for opportunities to share code, designs, and assets as much as possible so that you maximize the return on your investment. This section describes the sharing techniques that you can use when building you app for both platforms.Read full article
    LenovoDev.com Manager

    Very useful! Thank you!
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • Why was Phone Designer EoL'ed ?

    Cisco phone designer that was part of UCM 7.x was a great app for users to customize their own phone.  Anyone know why it was End of Life'ed with no replacement?

    i have been working thru issues with this app on version 10.5 of cucm and both a windows 7 and a xp  vm machine... tac has not been helpful. im spinning up a  physical xp machine  just so they will help me TS past this point....
    has anyone seen this error  below?  
    ERROR - WebException occurred setting background: The remote server returned an error: (415) Unsupported Media Type.
    System.Net.WebException: The remote server returned an error: (415) Unsupported Media Type.
    (edited removing info of user)(
    2014-08-04 12:25:56,242 [5] INFO  - 1) 2290 - User- Cisco Unified Client Services Framework - CSF??
    2014-08-04 12:25:56,243 [5] INFO  - Device response is valid
    2014-08-04 12:25:56,243 [5] INFO  - 2 devices configured for this user
    2014-08-04 12:25:56,243 [5] INFO  - DeviceName :SEP381C1ABA12B6: Description :  -  IC 435: of Model:Cisco 7965: added to list of supported phones
    2014-08-04 12:25:56,243 [5] INFO  - Cisco Unified Client Services Framework (CSF??) excluded as it is an unsupported model
    2014-08-04 12:25:56,243 [5] INFO  - 1 supported devices found
    2014-08-04 12:25:56,243 [5] INFO  - Devices retrieved from CUCM
    2014-08-04 12:25:56,313 [1] INFO  - Saved Export File
    2014-08-04 12:25:56,313 [1] INFO  - SaveEditedWallpaper Success
    2014-08-04 12:25:56,316 [1] INFO  - Retrieved -Blue Plastic.png- for save to phone
    2014-08-04 12:25:56,318 [1] INFO  - Entering SetBackgroundPreview - 10.0.30.12 - ?? - SEP381C1ABA12B6 - C:\Users\cnadarajah\AppData\Roaming\Cisco\Cisco Unified Phone Application\Temp\WallpaperExport.png
    2014-08-04 12:25:56,325 [1] DEBUG - Wallpaper request XML  :<setBackgroundPreview><deviceName>SEP381C1ABA12B6</deviceName><image>DesignerWallpaper</image></setBackgroundPreview>
    2014-08-04 12:25:56,345 [1] ERROR - WebException occurred setting background: The remote server returned an error: (415) Unsupported Media Type.
    System.Net.WebException: The remote server returned an error: (415) Unsupported Media Type.
       at System.Net.HttpWebRequest.GetResponse()
       at Cisco.PhoneSuite.Designer.Personalisation.Personalisation.SetWallpaper(Boolean previewMode, String deviceName, String imagePath, String iconPath, PersonalisationResponse& personalisationResponse)
    2014-08-04 12:25:56,353 [1] INFO  - Communicated with CUCM from SetBackgroundPreview - False
    2014-08-04 12:25:56,668 [1] INFO  - Returned Data is <?xml version="1.0" encoding="UTF-8" standalone="yes"?><error><code>HTTP415</code><message>Unsupported Media Type</message></error> error =  PROCESSING EXCEPTION +:System.Net.WebException: The remote server returned an error: (415) Unsupported Media Type.
       at System.Net.HttpWebRequest.GetResponse()
       at Cisco.PhoneSuite.Designer.Personalisation.Personalisation.SetWallpaper(Boolean previewMode, String deviceName, String imagePath, String iconPath, PersonalisationResponse& personalisationResponse)
    2014-08-04 12:25:56,668 [1] INFO  - personalisationResponse.StatusCode UnsupportedMediaType
    2014-08-04 12:25:56,668 [1] INFO  - WebException ConnectionError - Unable to connect to the server.
    2014-08-04 12:25:56,669 [1] INFO  - Message |Unable to connect to the server.|
    2014-08-04 12:25:56,669 [1] INFO  - Data|<?xml version="1.0" encoding="UTF-8" standalone="yes"?><error><code>HTTP415</code><message>Unsupported Media Type</message></error>|
    2014-08-04 12:25:56,669 [1] INFO  - returning from SetBackgroundPreview, errorData - Unable to connect to the server.
    2014-08-04 12:25:56,669 [1] INFO  - Failed PreviewWallpaperOnPhone Blue Plastic.png to SEP381C1ABA12B6
    2014-08-04 12:25:59,085 [1] INFO  - Shutdown Starting

  • Phone Designer Problem

    Hi All,
    I'm trying to transfer an existing image of Phone Designer Phone to a 7945G.
    However after a few moments later the message is: ''A communications failure occurred''
    Below is the Log Problem Report:
    2010-01-07 16:11:01,828 [1] INFO  - UpdateImageViewer starting :11:1:828
    2010-01-07 16:11:01,828 [1] DEBUG - UpdateImageViewer Start Raster HEIGHT 212 x  WIDTH 320
    2010-01-07 16:11:01,828 [1] DEBUG - UpdateImageViewer Start PhysicalViewRectangle HEIGHT 196 x  WIDTH 320
    2010-01-07 16:11:01,828 [1] INFO  - UpdateImageViewer started
    2010-01-07 16:11:01,828 [1] INFO  - UpdateImageViewer Initialised with Phone Cisco 7945
    2010-01-07 16:11:01,828 [1] INFO  - UpdateImageViewer completed
    2010-01-07 16:11:01,828 [1] DEBUG - UpdateImageViewer End Raster HEIGHT 212 x  WIDTH 320
    2010-01-07 16:11:01,828 [1] DEBUG - UpdateImageViewer End PhysicalViewRectangle HEIGHT 212 x  WIDTH 314
    2010-01-07 16:11:01,828 [1] INFO  - UpdateImageViewer Finished :11:1:828
    2010-01-07 16:11:01,828 [1] INFO  - WallpaperListSelectionChanged finished UpdateImageViewer(rasterImage)
    2010-01-07 16:11:01,828 [1] INFO  - Metadata check starting :11:1:828
    2010-01-07 16:11:01,828 [1] INFO  - Checking image for Metadata PropertyTagOrientation
    2010-01-07 16:11:01,859 [1] INFO  - Image rotation normal - no action taken
    2010-01-07 16:11:01,859 [1] INFO  - Metadata check finished :11:1:859
    2010-01-07 16:11:01,859 [1] INFO  - OnWallpaperListSelectionChanged completed - selected imageFile :Sea Beacon.png:
    2010-01-07 16:11:03,296 [1] INFO  - SaveEditedWallpaper Starting
    2010-01-07 16:11:03,296 [1] INFO  - SaveEditedWallpaper Default Phone Type = Cisco 7945
    2010-01-07 16:11:03,296 [1] INFO  - userDefaultPhoneType :Cisco 7945
    2010-01-07 16:11:03,296 [1] INFO  - Phone Display H x W :212 x 320
    2010-01-07 16:11:03,296 [1] INFO  - SaveEditedWallpaper Processing Image Starting
    2010-01-07 16:11:03,296 [1] INFO  - Image     H X W:216 x 320
    2010-01-07 16:11:03,296 [1] INFO  - Selection H X W:212 x 314
    2010-01-07 16:11:03,312 [1] INFO  - ViewPerspective set to :TopLeft
    2010-01-07 16:11:03,312 [1] INFO  - No crop required
    2010-01-07 16:11:03,312 [1] INFO  - Export Image viewperspective :TopLeft
    2010-01-07 16:11:03,312 [1] INFO  - Image Adjust to fit display
    2010-01-07 16:11:03,343 [1] INFO  - Saved Export Image
    2010-01-07 16:11:03,343 [1] INFO  - SaveEditedWallpaper Processing Image Success
    2010-01-07 16:11:03,359 [1] INFO  - Saved IconFile
    2010-01-07 16:11:03,421 [1] INFO  - Saved Export File
    2010-01-07 16:11:03,421 [1] INFO  - SaveEditedWallpaper Success
    2010-01-07 16:11:03,421 [1] INFO  - Retrieved -C:\Documents and Settings\acipriano\Application Data\Cisco\Cisco Unified Phone Application\Temp\WallpaperExport.png - for save or preview
    2010-01-07 16:11:03,421 [1] INFO  - Entering SetBackground - 10.120.108.110 - telsinc1 - SEP0024C44300E0 - C:\Documents and Settings\acipriano\Application Data\Cisco\Cisco Unified Phone Application\Temp\WallpaperExport.png - C:\Documents and Settings\acipriano\Application Data\Cisco\Cisco Unified Phone Application\Temp\WallpaperIcon.png
    2010-01-07 16:11:03,437 [1] DEBUG - Wallpaper request XML  :<setBackground><deviceName>SEP0024C44300E0</deviceName><background><image>DesignerWallpaper</image><icon>WallpaperIcon</icon></background></setBackground>
    2010-01-07 16:12:03,765 [1] ERROR - WebException occurred setting background: The server committed a protocol violation. Section=ResponseStatusLine
    System.Net.WebException: The server committed a protocol violation. Section=ResponseStatusLine
       at System.Net.HttpWebRequest.GetResponse()
       at Cisco.PhoneSuite.Designer.Personalisation.Personalisation.SetWallpaper(Boolean previewMode, String deviceName, String imagePath, String iconPath, PersonalisationResponse& personalisationResponse)
    2010-01-07 16:12:03,781 [1] ERROR - Error processing WebExceptionThe server committed a protocol violation. Section=ResponseStatusLine
    System.Net.WebException: The server committed a protocol violation. Section=ResponseStatusLine
       at System.Net.HttpWebRequest.GetResponse()
       at Cisco.PhoneSuite.Designer.Personalisation.Personalisation.SetWallpaper(Boolean previewMode, String deviceName, String imagePath, String iconPath, PersonalisationResponse& personalisationResponse)
    2010-01-07 16:12:03,781 [1] INFO  - returning from SetBackground, success - False
    2010-01-07 16:12:03,984 [1] INFO  - Returned Data is The server committed a protocol violation. Section=ResponseStatusLine error =  PROCESSING EXCEPTION +:System.Net.WebException: The server committed a protocol violation. Section=ResponseStatusLine
       at System.Net.HttpWebRequest.GetResponse()
       at Cisco.PhoneSuite.Designer.Personalisation.Personalisation.SetWallpaper(Boolean previewMode, String deviceName, String imagePath, String iconPath, PersonalisationResponse& personalisationResponse)
    2010-01-07 16:12:03,984 [1] INFO  - personalisationResponse.StatusCode 0
    2010-01-07 16:12:03,984 [1] INFO  - WebException ProtocolError - Ocoreu uma falha na comunicação.
    2010-01-07 16:12:03,984 [1] INFO  - Message |Ocoreu uma falha na comunicação.|
    2010-01-07 16:12:03,984 [1] INFO  - Data|The server committed a protocol violation. Section=ResponseStatusLine|
    2010-01-07 16:12:03,984 [1] INFO  - Failed SetBackground, errorData - Ocoreu uma falha na comunicação.
    2010-01-07 16:12:03,984 [1] INFO  - Failed saving C:\Documents and Settings\acipriano\Application Data\Cisco\Cisco Unified Phone Application\Temp\WallpaperExport.png to SEP0024C44300E0
    2010-01-07 16:12:03,984 [1] INFO  - Errordata returned is Ocoreu uma falha na comunicação.
    2010-01-07 16:12:08,562 [1] INFO  - Save Wallpaper to cache failed
    2010-01-07 16:12:10,703 [1] INFO  - Starting compression of file C:\Program Files\Cisco Systems\Cisco Unified Phone Application\LogFiles\phonePersonalization.log
    2010-01-07 16:12:10,703 [1] INFO  - -- Problem Report System Details --
    2010-01-07 16:12:10,703 [1] INFO  - OS Version  : Microsoft Windows NT 5.1.2600 Service Pack 3
    2010-01-07 16:12:10,703 [1] INFO  - CLR Version : 2.0.50727.3603
    2010-01-07 16:12:10,703 [1] INFO  - Assy build no = 7.0.3128.27720
    2010-01-07 16:12:10,703 [1] INFO  - Build Version : 7.0(1) - 1485
    Can help me ?
    Thanks,
    Alan

    If configuration was good, we'll need packet capture between CUCM and IP phone.
    On CUCM, you may use command "utils network capture file cucm count 100000 size all host all 192.168.1.100".  Where 192.168.1.100 is the IP address of IP phone.
    For the phone, you may enable "SPAN to PC" option from CUCM and do the capture with a PC.
    Or if it's possible, you may plug the phone into the same subnet with CUCM.  See if that makes any difference.
    Michael

Maybe you are looking for