Phone disconnects from car Bluetooth when skipping a song on Spotify.

How's that for an oddly specific problem? Using a Samsung Galaxy Ace 3, Spotify and the car Bluetooth (Suzuki Swift, if that's relevant).  Phone connects to Bluetooth no problem.  To the problem: When selecting a song from a playlist or artist (I assume from anywhere else, but I haven't tried) the phone will disconnect from Bluetooth, Spotify will continue playing, silently, then the phone will reconnect, and start playing through the car speakers (already a few seconds progressed into the song).  The same issue occurs (disconnecting from Bluetooth, then reconnecting) a) when skipping songs (either through the car's Bluetooth controls, or manually on the Spotify app) and b) when the song reaches its end and naturally progresses to the next. Plot twist, though, if I pause the song, then skip to the next one, it will start playing the new song instantly, with no disconnect issue. I've tried this with other music playing apps (aka not Spotify) and the issue does not persist. EDIT: I've tried offline and online, problem persists for both. I'm sure you can imagine that this is an incredibly annoying issue, and I'd love any support you can offer. Especially given that mobile playing is 95% of the reason I'm paying for premium.

Use this: http://www.apkmirror.com/apk/spotify-ltd/spotify/spotify-3-4-0-689-beta-android-apk-download/

Similar Messages

  • Iphone keeps disconnection from car bluetooth

    My phone is great but every 5 minutes or less it disconnects from the bluetooth in my car, which is very annoying and dangerous since if I want it to stay connected while I'm driving I need to constantly fiddle with it. I should add that I have the phone lock enabled and have tried different auto-lock times from one minute to never and it still disconnects from blue tooth no matter what the setting. Any ideas?

    More on the issue.  If it is connected and I try to use the bluetooth prompts in my car to make a call, It will start to ring, my phone screen will go black and I can't do anything or hear anything.  It will come back after about 10-15 seconds but the speaker button will be missing .  Then all of a sudden, the speaker button reappears.but it is not on bluetooth anymore.

  • I have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

    i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

    You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
    this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
    http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

  • Cellphone event handler (event when phone disconnected from charger?)

    I need to know what event_ is called when a cellphone is disconnected from a power source_.
    I have looked for hours for a list of methods, properties and events for java and midp with no luck. If such a file exists I would love to know where to find it.
    Edited by: Danstarlight on Oct 7, 2007 9:59 AM
    Edited by: Danstarlight on Oct 7, 2007 10:00 AM

    I have noticed that on all cell phones there is a battery state animation which starts when connected to a charger which shows the phone is charging, and usually a light turns on and a message which says something like "Charging" shows up. This animation stops as soon as the phone is disconnected.
    If this is hardware programming is there any way to use listeners to look for a change in the relevant variables?

  • Modem disconnects from net only when using iPad Mini

    Hi, I'm using TP-Link TD-W8951ND Modem, When I connect my iPad mini to it and start browsing internet or watching videos the modem disconnects from net. This problem doesn't happen when I do the same with my Android phone or laptop. I have reset both iPad and modem without any luck. This is very frustrating for me. Kindly Help!

    this is solved by me
    ill take the solution with me since no one offered any help..
    thanks for all the hard work from black berry online and phone support 

  • HOW TO DISCONNECT FROM THE INTERNET WHEN TRAVELING INTERNATIONAL

    HELLO EVERY ONE.I RECENTLY TRAVELED TO CANADA,WHEN I RETURNED BACK HOME I RECIEVED AN $1800 CELL PHONE BILL,$1000 OF THE BILL WAS INTERNET USAGE,I ADD AN INTERNATIONAL FEATURE BEFORE I LEFT BUT IT WAS LIMITED (HOW DO YOU CHECK HOW MUCH USAGE YOU HAVE USED WHILE BROWSING).SO I ASKED AT&T/A GUY IN THE APPLE STORE,BUT NO ONE REALLY KNOW HOW TO DISCONNECT FROM THE INTERNET AFTER USING IT,WHEN TRAVELING INTERNATIONAL.(MY TREO HAD AN OPTION THAT ASKED DO YOU WANT TO DISCONNECT FROM THE INTERNET)(THE IPHONE DON'T)

    If you have upgraded to version 1.1.1 or later there is a switch to disable cellular data while roaming. By default it is set to disable data. Settings/General/Network Data Roaming.
    You can monitor cellular data usage in Settings/Usage. Reset it just before traveling.

  • IPod Classic Randomly Disconnects from Car Stereo

    I have a 160GB iPod Classic that is hooked up to my car stereo. Previously it was connected to a 2012 Kia Sorento SX and it would just randomly disconnect from the stereo and freeze. The only way to get it back was to do a hard reset (menu/select button held down), then start playing a song, and then connecting to the stereo. It didn't happen frequently, but maybe once or twice a month.  Annoying.  But I thought it had to do with the way Kia implemented the connection to the iPpd.
    I just recently acquired a 2014 Acura MDX and I've already had that same annoying problem twice in 2 days. So now I'm starting to think maybe it's the iPod.
    In the past, I've done a full restore, repaired the drive, etc. Nothing seemed to help.
    Any ideas?  Thanks!!

    Sometimes this works. Otherwise you will have to wait for an updte to the car system or the iOS on the iPod
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the car system
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • I bought a iPhone 6 yesterday and I restored my iPhone 6 from my iTunes back up. After my phone restored from back. When I plug my iPhone 6 it's still saying my iPhone 6 is new and still giving me the restore from a back up or set as a new iPhone

    I bought a iPhone 6 yesterday and I restored my iPhone 6 from my iTunes back up. After my phone restored from back up. When I plug my iPhone 6 it's still saying my iPhone 6 is new and still giving me the restore from a back up or set as a new iPhone option. But I already have it restored. How come it's not giving me any option to cancel.

    Click set up as a new iPhone. It will associate the device with your library without clearing the content that you have already loaded onto it.
    tt2

  • My MacBook Disconnects From The Net When It Is Closed? Can I Change This?

    Hey, since I got my MacBook a month ago, the only thing that has bugged me is that my MacBook ALWAYS disconnects from the Internet (WiFi) when the lid is closed. This is irritating because I have to relogin to my MSN Messenger Mac, which takes a very long time. Originally I thought this was how it was meant to function, but a friend of mine told me that when he closes the lid his MSN Messenger Mac stays connected.
    I've looked all over in Preferences, but I simply cannot find any option to prevent the MacBook from dropping its connection when the lid is closed.
    This problem irks me so because I had to carry my MacBook around the house while its open, which is risky...
    Any help will be much appreciated. Thanks.

    Doinchi wrote:
    Hey, since I got my MacBook a month ago, the only thing that has bugged me is that my MacBook ALWAYS disconnects from the Internet (WiFi) when the lid is closed. This is irritating because I have to relogin to my MSN Messenger Mac, which takes a very long time. Originally I thought this was how it was meant to function, but a friend of mine told me that when he closes the lid his MSN Messenger Mac stays connected.
    I've looked all over in Preferences, but I simply cannot find any option to prevent the MacBook from dropping its connection when the lid is closed.
    This problem irks me so because I had to carry my MacBook around the house while its open, which is risky...
    Any help will be much appreciated. Thanks.
    Doinchi wrote:
    Hey, since I got my MacBook a month ago, the only thing that has bugged me is that my MacBook ALWAYS disconnects from the Internet (WiFi) when the lid is closed. This is irritating because I have to relogin to my MSN Messenger Mac, which takes a very long time. Originally I thought this was how it was meant to function, but a friend of mine told me that when he closes the lid his MSN Messenger Mac stays connected.
    I've looked all over in Preferences, but I simply cannot find any option to prevent the MacBook from dropping its connection when the lid is closed.
    This problem irks me so because I had to carry my MacBook around the house while its open, which is risky...
    Any help will be much appreciated. Thanks.
    It's suppose to do that. This is one way to conserve the battery of your Macbook. However, there is a way to combat this by deactivating the system's sleep function temporarily through this software: InsomniaX. Remember to re-enable the sleep function before you turn off your system or else it may screw it up.

  • Why does my iMac disconnect from the wifi when it goes to sleep?

    Everytime my iMac (Early 2008) running mountain lion goes to sleep it disconnects from the wifi (I only have wifi available) I then get a 'the browser does not support the :File extension)
    I'm stuck please help....

    Hi Matt,
    This has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • ITunes 9.0 pausing when skipping a song off of a USB external drive

    This is not random and is very much related to iTunes 9.0, because it didn't exist with 8.0. Or well, I could normally skip through 3-4 songs off the external HDD before a similar short pause, and I just always figured it was a normal buffer issue of the USB bus and its drivers. Besides, it was shorter than what I'm putting up with right now.
    It could also have something to do with the following things:
    (1) the Iomega Prestige Portable drive (2)is attached to two ports of the hub in my HP LP2475W display, and (3)the hub also has the logitech cordless desktop for mac receiver hooked to it, and the hub itself is attached to the other one of the MacBook's two USB ports. The other one has my old LaCie Porsche now used for Time Machine backups. However, that should be irrelevant in this equation, while the only key factor would be iTunes 9.0 itself, as I've had it setup like this, and sometimes hooked up things like a USB scanner, point&shoot digicam, even my Razr on the monitor's usb hub while playing iTunes all summer long with no problems.
    Well, it could be also have something to do with Leopard and iTunes, and Snow Leopard upgrade might resolve this. I'm still waiting for Apple Up-To-Date to resolve it, as I bought my computer from an authorized retailer, so I had to go through the print and mail hoop and loop crapola for some reason.
    Secondly, I'm estimating there are plenty of Mac users, especially those with a laptop, who keep their music collection on an external drive, which in many cases probably happens to be a USB one. So, this probably affects a whole lot of users.
    Thirdly, if the Windows 7 version is affected with the same behaviour plus one degree down south, meaning it is happening with the internal HDD as well*, this was something they forgot to test and after a few user complaints, they should release a patch. *As reported by a friend of mine using Windows 7 on a minilaptop.
    I cannot stress enough how freaking annoying that pause/lag all of a sudden is. Especially when you are doing something or actually working while you're listening and you press that skip button on your keyboard when the next song starts and you don't feel like listening that one but want the next one that the shuffle is playing. So, normally this move integrates seamlessly with my workflow, or just flow when I'm not actually working, and my eyes are reading the screen, left hand rests on the keyboard (iTunes-specific) skip button, while my right hand operates the mouse and ears do the sound registering bit so I know what song is on the iTunes plate, until I get to the next song I like. Now all of a sudden there's this annoying and irritating pause between every skip messing the s**t up of your flow. That's BS. And if you're browsing through the playlist looking for a certain song and then you double-click that it's the same thing as already described.
    Message was edited by: MikkoV

    MikkoV,
    The same exact thing is happening to me (but I have Snow Leopard). My music is on a USB external hard drive (1TB MyBook) and with almost every song I try to skip, it hangs for upwards of 5 seconds. This is especially annoying because I shuffle my music quite often and I tend to skip over many songs before I find one I want to listen to; and, it happens both when the music is paused and playing.
    This hanging has never happened to this extent before upgrading to iTunes 9.0. If there is not a fix to this how can I go about downgrading to iTunes 8.0?

  • Lync Phones Disconnect Events are Firing when a call is answered

    Im working with Lync client SDk 2013. I am trying to write a simple desktop application to determine when a call is Ringing, Answered, and Disconnected. I testing my application using Lync Desk phone (polycom phones). When i call my Lync phone, i get a "Notified"
    event, and when That call is answered, i get a "Disconnected" event.
    private static LyncClient _client;
    private static void Main()
    _client = LyncClient.GetClient();
    _client.ConversationManager.ConversationAdded += ConversationManager_ConversationAdded;
    _client.ConversationManager.ConversationRemoved += ConversationManager_ConversationRemoved;
    Console.ReadLine();
    static void ConversationManager_ConversationAdded(object sender, ConversationManagerEventArgs e)
    e.Conversation.Modalities[ModalityTypes.AudioVideo].ModalityStateChanged += Program_ModalityStateChanged;
    static void Program_ModalityStateChanged(object sender, ModalityStateChangedEventArgs e)
    Console.WriteLine("Modality state changed "+ String.Format("{0} => {1}", e.OldState, e.NewState));
    static void ConversationManager_ConversationRemoved(object sender, ConversationManagerEventArgs e)
    //....some code.
    }output from this code isModality state changed Disconnected => NotifiedModality state changed Notified=> DisconnectedI did come across few nice articles, but those don't seem to help me.http://blog.thoughtstuff.co.uk/2013/01/tracking-lync-conversations-in-code/http://msdn.microsoft.com/en-us/library/office/hh345194(v=office.14).aspxIs there any way to determine when the call is answered and disconnected?Thanks

    Hi,
    You might post the issue on Lync MSDN forum and more developing expert will help to verify if this can be achieved using Lync SDK. Thank you for your understanding.
    http://social.msdn.microsoft.com/Forums/en-US/communicatorsdk/threads
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • IPhone 3G won't charge from car adapter when battery is low

    I regularly use my Griffin car charger to charge my iPhone 3G. It seems to work well most of the time.
    When my iPhone 3G is very low on battery charge, I discovered that the the iPhone will no longer charge via the car charger. Only way I can recharge the iPhone is via the cable connected directly to my computer or via the wall adapter.
    Is this a normal behavior? Very unfortunate if it is since forcing a mobile user to connect to a wall outlet or a computer makes no sense.

    Copied from my previous post in this thread.
    I know if the iPhone's internal temperature if over a designated temp, you can't charge the battery until the internal temp has been reduced. This is protection for the battery and internal components since charging increases the internal temp.
    When this occurs, the charging indicator will switch to showing as being fully charged.
    Are you using a case?
    Charging increases the internal temp of the iPhone, and using GPS will also increase the internal temp of the iPhone. Combined must have increased the internal temp of your iPhone past the designated temp when charging stops. Using a case can prevent heat from being dissipated properly.

  • IPod touch with ios7 disconnects from car stereo speakers

    After upgrading my 2012 iTouch to ios7 It no longer automatically connects to my car stereo speakers when the car is restarted.  Rather it begins playing out of is own speakers.  I need to remove and then re insert the connector.
    This was not a problem with ios6 nor Arlie devices.  I is an obvious ios7 bug.
    I would appreciate any suggestions

    Sometimes this works. Otherwise you will have to wait for an updte to the car system or the iOS on the iPod
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the car system
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • N97 disconnects from Nokia Suit when battery is fu...

    My N97 connects fine to Nokia Suit as long as the battery requires charging, once the charge light indicator goes out, nokia suit is disconnected and will not connect via USB no mater what.
    I get the ping pong sound when USB is connected but no announcement on N97 to select connection type.
    Run down the battery and everything is perfect.
    Its a windows 7 PC and the same problem is apparent at my office and home.
    Any ideas?
    Thanks

    Oh okay.
    Is there a way to access the hard drive of the phone without it turning on? There's photos, video clips and texts I'd like to save.
    Or is the harddrive fried too? If say the phone was to be repaired, would they have to replace everything internally? ie, more or less end up with a new phone anyway?
    Thanks.

Maybe you are looking for

  • Error while creating Business Partner in Collections Management

    Hello All, I am trying to create Business partners for Customers in Collections Managment, specific to country Luxemburg. The error I am getting says that, 'Tax number category LU2 does not exist' and 'There is no BAPI field to screen field assignmen

  • I can't open the books in iBooks

    I just purchased two books and downloaded them into iBooks. When I tried to open them, I got "Failed to load book because the requested resource is missing." on each of them. I attempted to open books I had purchased previously and got the same messa

  • Audio sync issues with variable frame rates as well as .ts files

    I'm using Premiere Pro CS6 and CC, in Windows 8. I bought an AverMedia Live Gamer HD card to capture 1080p footage with, and the the videos it produces work perfectly during playback. No sync issues whatsoever. I'm saving them as MP4 at 30fps. The pr

  • More iWeb crashes, 2 Macs, both crashing

    I have iWeb 09 loaded on 2 machines (iMac and MacBook, both with Snow Leopard). The program is behaving the same on both machines except I get a missing font error on the iMac in addiion to the sudden crashing, but no error on the MacBook, it just cr

  • Srpy, not in Web Standards! why?

    i have been using Spry for sometime.. But when i was trying to make the " image gallery " , i notice that Spry is using custom html codes and not base in Web Standards.. I would like to ask if it can be fixed in the later release, i know it might be