Phone does not ring, alert, etc, when locked.

I have missed every call and text message thus far since owning this phone because when the phone is not in use (locked), it does absolutely nothing. For example, I was talking to my dad on the phone (I initiated the call). I told him to call me RIGHT BACK and then proceeded to lock the phone. I sat 3 inches from the phone and stared at it. After about five minutes I unlocked the phone and I had a missed call. *** is with this phone?

My phone also had this problem at&t and apple could not figure it out finally they just told me to take it in to apple and get it replaced they had no problem doing so. I would just try that good luck.

Similar Messages

  • Phone does not ring when I get calls

    My phone does not ring when I receive incoming calls since I upgraded software to IOS 7. 

    I tried that just now and it doesn't seem to have fixed it--but it is not a constant problem--just sometimes!  I received a call from a friend when do not disturb was turned off but  also when it was on!  That was really strange!
    Now I am trying to figure out why my camera flash won't work!!
    Yikes crazy stuff going on with my phone since I updated the software!.

  • Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

    Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

    This morning I woke up thinking that I should turn off my iPhone and then call it from a land line.  If the problem is the network then there would be a delay before I heard ringing.
    I turned my iPhone off and called it.  Right away I heard my message.
    I turned my iPhone back on and called it.  It rang right away!
    So, did Virgin Mobile fix the problem or did turning my iPhone off fix the problem?
    I don't know, but I'll take either.  I do know that Virgin Mobile said it would be four days to check the problem.  Did the problem get fixed yesterday when the four business days were up.  I do know that I've had my iPhone on for a long, long time.  Did upgrading to 6.1.1 or 6.1.2 cause the problem and turning my iPhone off reset my iPhone?
    If you have delayed ringing problem and turning your iPhone off and on again resolved it, please post a note here.
    P.S. I did call Virgin Mobile and its records show the investigation is still open.  I hope my points get passed on to the investigators.
    P.P.S. Reading my notes, I had turned my iPhone off and on last week.  Maybe it's all the phase of the moon.

  • Phone does not ring when unknwon number calls

    Please help. This has only just starting happening.
    If a phone call is received from a number not in my conatcts list, the phone does not ring.
    Any ideas anyone.
    Thanks Rich.
    Solved!
    Go to Solution.

    It may happen that profile exception is active.
    To check this go to Profiles -> Advanced -> Uncheck all check box under User Active Profile Except fo:
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • M127fn phone does not give signal fax when pressing 1,2,3

    Hi, I am Marc and I am new to this forum. Kindly excuse me of any wrong doing on a prior notice. Thanks! I bought the HP M127fn 4in1 unit one month ago and I am still not able to use this unit fully. On my old fax, Panasonic KX-FP342, when the phone rings and I answer, I can make a normal phone call or press the fax signal button to give a fax signal if it is a fax. However, If I do not answer, the panasonic unit picks up the line and gives a fax signal automatically after 5 unanswered ringtones. With the HP M127FN, I am not able to do this procedure. For description, I have the HP unit connected to the wall outlet and 2 phones in my house. One of the phones is connected to the HP Printer extension port and the second phone is connected to another separate socket ( to the same phone number ). When the phone rings for 5 times and I dont answer, the machine picks up the line and gives a fax signal automatically ( which is the normal procedure). But, the problem is when I answer the line. When I pick up the line and the caller asks me to give him a fax signal, I press 1,2,3 ( i tried this using the normal line and the extension line ) but nothing happens on both lines. So i appologize to the caller and ask him/her to call again which is really annoying me since I get around 10 to 15 faxes per day. I want the unit to answer automatically give a fax signal ( regardless of the caller's type ) after 5 ringtones and I want to answer the phone and be able to give a fax signal by myself if necessary. Fax answer type = automatic, rings type = all rings, extesion phone line = yes, rings to answer =5. Please Help!!!! 

    Hi , Welcome to the HP Forums! I see that your HP Laserjet m127fn phone, does not give signal fax when pressing 1,2,3. I am happy to help!  According to page 48 of your printer's user guide:  LCD control panel 1. On the product control panel, press the Setup button.
    2. Select Fax Setup, and then select Fax Recv. Setup.
    3. Select Extension Phone.
    4. Make sure that the On option is selected.
    With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3 sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence. The telephone company service does not work if it conflicts with the product. 5. Press the Back button to return to the Fax Recv. Setup menu.
    6. Select Answer Mode.
    7. Select Fax/Tel, and then press the OK button. With this setting, the product automatically picks up all calls and determines if the call is a voice or fax call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming voice call. 8. Press the Back button to return to the Fax Recv. Setup menu.
    9. Select Fax/Tel Ring Time.
    10. Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to notify you of an incoming voice call, and then press the OK button. Hope this information helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • My iphone 4 does not ring for messages when i use the handsfree..

    my iphone 4 does not ring for messages when i use the handsfree..

    iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.

  • Phone does not ring after using Bluetooth

    I have an iPhone 5 with IOS 8.1.  My phone does not ring or notify me of incoming texts.  This happens after I connect to Bluetooth.  If I reselect my ringtone, the phone works, until the next time I use Bluetooth.  It seems like a bug in a recent update.

    I had same issue. My phone will not ring or get text sounds when locked. This morning my alarm did not make a sound neither. Thanks to my dog who woke me up. My "do not disturb" was on. It's the moon on your quick menu. I wish the phone will let you know the "do not disturb" is on when you hit the home button to use the phone. I was not aware of this feature on my quick menu.

  • My i4s phone does not ring on incoming calls.  The settings appear to be correct

    My i4s phone does not ring on incoming calls.  The settings appear to be correct for the phone to ring.
    Also, during a call, when I hit the speaker buttom, I can neither hear nor be heard by the other party
    Any suggestions?

    Try a factory restore, this might be a software problem so just plug into itunes and go and click the restore button. If this doesnt fix it then its a hardware problem meaning you need to head to an apple store for a replacement.

  • Phone does not ring though ringer is on and music/other sounds can be heard. Why?

    my phone does not ring even though the ringer is on. music plays and other sounds can be heard but it does not ring. Why?

    Hi there gizmotoall,
    You may want to verify your settings using the information in the article below. Also, double check that the side switch isn't set to silent mode.
    iOS: Understanding sounds, ringtones, and alerts
    http://support.apple.com/kb/HT5800
    -Griff W.

  • Phone does not ring although settings on and sound works

    Phone does not ring when called; however, sound works

    Is the silent switch on the side of the iphone on?

  • Iphone 4s, Does not ring and vibrate when there is an incoming call. It shows as missed.

    Just bought a new iPhone 4 s and realised that sometime I could see missed calls without hearing the phone ringing. Tried several times with an other phone to place a call and could see that when phone goes in standby (screen black) and there is an incoming call the phone does not ring or vibrate. It does start to ring only if I press the round button. Has anybody experienced the problem? Can you help me? Thanks

    [email protected],
    Sorry to hear the phone is not always ringing like it should. We don't want you to miss any calls. Let's get that ringing for you again. Try resetting the network settings: http://vz.to/17Us9Pn . Retest and let us know how it's working.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
    It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
    Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

  • TS2326 phone does not ring

    My phone does not ring.  I see someone is calling, but I get no sound and I can't talk to the person calling either.
    As well, my text msg does not sound either.

    use the side control and make sure your phone isn't on vibrate, up for ringer.

  • HT4515 phone does not ring during incomming call

    phone does not ring during incomming call

    Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this.  Also ensure the volume is up.  If you've checked these and still nothing are you able to call people? do you have service?

  • I have installed a ringtone but phone does not ring on incoming calls

    I Have an Iphone 4S, it came with vibration set as default ringtone, I changed the ringtone but the phone does not ring on incoming calls, What is wrong?

    Also, you may want to do a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers, so that everything is reset.

Maybe you are looking for

  • Touch3G, ios 5.1.1, how to get rid of "reading List" in the bookmarks section and history file in reading list no longer works.

    Since downloading 5.1.1, my Touch 3G has "Reading List" in the Bookmarks section and the "history" tab no longer shows anything.  How do I delete "reading list" in the bookmarks section?  Very disappointed to have this pushed on me without warning. T

  • How to get the refreshed data from Input schedule while using evsnd

    Hi Experts,                  I am using EvSnd function for sending the data from a Input schedule. Acc                Value                                             xx----     xy------        10     xz-------       20 these above cell value 10,20

  • Active Directory 2008 and Crystal Reporting

    Hello, My company is planning to upgrade to Active Directory 2008 R2. But before we do so, we must understand how our servers & applications interact/work with Active Directory 2008 R2. Could you please answer the following questions in regards to yo

  • Frequent shut down

    My computer shuts down after short period of sleep or if I choose "sleep" from the menu. Sometimes I can restart, sometimes I have to unplug the power for a while to get it to restart. My serial number is within the three-year policy period but I'm 3

  • Whats wrong with .mac an iWeb 08?

    hi, i try to publish my small website i made in iweb 08 to my .mac-account. each kin d of publishing works, the "publish in a folder", "publish all to .mac" and so on. but if i choose the the option "visit the site" after the publishing, i get an err