Phone doesn't turn on. And keeps on blinking when connected to charger

Please help me.. Phone doesn't turn on. And keeps on blinking when connected to charger.. The logo keeps coming up and then vanishes..

Similar problem here. Iphone 5 32gb met iOS 8.1.2 keeps blinking apple logo when connected to the charger but doesn't start up. iTunes doesn't recognise it, but i managed to get it into recovery mode. But sadly the update stops with an unknown error 2001. Changing cables, ports or even laptops doesn't help. DFU mode gives similar results.
Any suggestions where to go from here?

Similar Messages

  • Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone

    Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.

    If using windows...
    Temporarily disable your firewall and antivirus software and try again...
    http://support.apple.com/kb/TS1379
    See iTunes Connection Issues here...
    iTunes for Windows: Troubleshooting security software issues
    NOTE:
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Ipod doesn't turn ON and apple logo blinks

    I was fascinated about the Ipod during my college days and bought one when I went to U.S. in February,2014. It is 7th Gen grey Ipod nano. Earlier this month, the Ipod started to behave strange. It is not even turning ON even though I feed the charge. I searched for the solutions online and tried to reset as suggested by many mates. It is not even resetting, but an apple logo starts blinking when I try to do that. I took it to the apple store(service) this monday and today I got a call saying that it cannot be replaced as it was a physical error (Screen Popped out minutely),which never happened. I was so surprised. I swear, I didn't even handled it hard. Screen is even at all the surfaces.
    Apple cannot replace it but can give an exchange offer for 7.5k INR. On an Ipod which hardly works for couple of months, why will I invest 7.5K ? I dont want any Ipod. I will leave it in the store itself for their reasons/research.
    #Frustrated

    i had this problem, i changed the battery and bang, worked perfectly again......apple said it was a logic board failure...

  • I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

    I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

    probably need pc or mac update for ios 6 on your home device

  • I forgot passcode on my iphone5 and tried to restore it through itunes on my PC. However it gave me an error message saying that that my phone could't be restored due to an unknown error. Now my phone does't turn off and it doesn't sync with itunes.

    I forgot passcode on my iphone5 and tried to restore it through itunes on my PC. However it gave me an error message saying that that my phone could't be restored due to an unknown error. Now my phone does't turn off and it doesn't sync with itunes.

    Hi there calcit08,
    Welcome to Apple Support Communities. 
    Take a look at the article linked below, it provides a lot of great information and troubleshooting suggestions that’ll resolve the issue that you’re running into restoring your iPhone 5 with iTunes on your PC.
    Resolve iOS update and restore errors in iTunes - Apple Support
    Take care,
    -Jason 

  • My old phone doesn't turn and I want to get the serial number for it to see if it's eligible for the battery replacement with Apple. Can I use the IMEI number to find the serial number?

    My old phone doesn't turn and I want to get the serial number for it to see if it's eligible for the battery replacement with Apple. Can I use the IMEI number to find the serial number?

    Call applecare.  They can look up the IMEI number in their system to see if the device is eligible.
    AppleCare US phone number: (800)-694-7466
    Contact Apple for support and service
    http://support.apple.com/kb/HE57

  • Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Where did you purchase the phone? Then, you can use this support document to find out how to contact Apple Support from your location. Contact Apple for support and service - Apple Support

  • Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    I have had about 9 iOS devices at work do this. 
    The fix and it will wipe out anything on your iphone is to connect it to your computer and have the latest version on iTunes open.  Hold the Power/Sleep and Home button till it blanks out.  Keep holding the home button untill it says recovery mode on the screen of the computer and do a restore.

  • Phone doesn't turn on, solid red light, requires send back BUT I have a request.

    I've essentially figured out that my Z10 needs to be returned for some sort of warranty / repair, however I'm really hoping that we can request that the data on the phone be saved rather than it just be lost forever. Is this possible? There are many important notes that haven't been backed up.
    Symptoms: Phone doesn't turn on, red light comes on solid for a few minutes and then turns off. Connecting it to a computer doesn't result in anything (no computer connection, no change in phone).
    I am with Bell, and I even live in Kitchener (I could personally drop into BB to sort this out) I wanted to check here as a last resort before sending it back.
    Thanks!

    Hi and Welcome to the Community!
    I used these steps from Geek Squad and it worked for me.
    Restore BB10
    When a BlackBerry 10 device is only flashing the red light and refusing to boot up, this indicates that the device’s operating system has become corrupted. The flashing light may follow the pattern of 1, 2 or 3 short blips, with a longer pause between the sets.
    In order to fix this, you need to re-install the operating system on the device, which will then set the device back to its original factory state.
    Please note: this process will completely wipe your device, so please make sure you have a backup of your personal information available to restore before going through this process. 
    Download and install the latest version of BlackBerry Link for your computer.
    Open BlackBerry Link software.
    Plug in the BlackBerry device using your USB cable.
    At the bottom left of the program, find the device you're having issues with and select it by clicking on it.
    The BlackBerry Link application will then ask to either reconnect or reload the device software. Choose Reload.
    Confirm the reload when prompted to do so, which will wipe clean any data previously on the handset.
    Allow the reload to complete, which can take some time. Whilst this is underway, the device will have a solid green light. This process of downloading and reinstalling the device can take an hour or more, depending on the speed of your internet connection, soplease don't disconnect the BlackBerry until the process has finished.
    Once the restore is complete, simply set up your device again, or restore it from a previous backup stored on your machine. However, if you want to restore a previous backup, remember to sign in to your BlackBerry ID on the device first! If you're not sure how to do this, we have a full guide available.
    The good news is, this process is almost identical on both PC and Apple Mac. Simply follow the same process as above. Finally, if you have any questions, please don't hesitate to get in touch with us.
    VIA | nakumba
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-dead-red-light-blinks/m-p/2478589/highligh...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • When i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. how can i stop it and turn on my ipod??????

    when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Macbook air dosent turn on and keeps beeping

    macbook air dosen´t turn on and keeps beeping

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • My ipod doesn't turn on and doesn't charge at all.what will i do?can i replace that for free?i just used it for 7 months

    my ipod doesn't turn on and doesn't charge at all.what will i do?can i replace that for free?i just used it for 7 months..hope you can help me

    See http://support.apple.com/kb/TS3281.  I had the same problem, but solved it by holding down the home button and the on/off button for 10 seconds.  If you are lucky, that will work for you as well!

  • My mac wont turn on and keep rebooting

    can please anybody help me?
    my mac suddenly won't turn on and keep rebooting half way then turn gray green and shut down
    i dont know what to do

    I suspect the HD is failing.
    If you reboot holding the option key, I would expect it shows your Macintosh HD as a bootable option.
    You can try running Disk Utility from the Recovery and Repair Disk to see if it shows any problems, but this is probably not the cause.
    Recovery  http://support.apple.com/kb/HT4718

Maybe you are looking for

  • How can i install a 64 bit version on PS CC?

    in my cc-center only ps cc is metioned, no hint of 64 or 32 bit version, after installing only the 32 bit version starts? How ca i install the 64 bit evrsion on my windows 7-64 bit system?

  • Setting focus to component in new tab

    I have a static function in my main class with a JTabbedPane as a parameter...the function does this: //Add a tab tabs.addTab("New File", new STab()); tabs.setSelectedIndex(tabs.getTabCount()-1);           ((JPanel)tabs.getSelectedComponent()).getCom

  • "My Number" is not displaying anywhere on my iPhone

    I had a problem where "My Number" did not display anywhere on my iPhone or in iTunes. Resolution, get a new SIM card. In my case there was a problem when I activated the phone; the number was not saved to the card. iPhone and iTunes gets your number

  • Wrong persistent unit

    Dear sdn members, I am using NetBeans 5.5 , database PostgreSQL 8.1, Sun Application Server 9, and hibernate.I copied following jars from Hibernate to lib directory of my application server # From hibernate entitymanager 3.2.0 cr2 * hibernate-entitym

  • Time limit in flash cs4

    Hi, I'm new to the forum and also to flash.I'm trying to create a 2 minute video. Can someone please tell me how to set the time.for eg: I want the first part of animation i createed to play for 5 seconds.when i give the frame from 1 to 5 it plays to