Phone doesnt restart after update

phone doesnt restart

try resetting your device by holding down the sleep wake button aka power button and the home button till you see the apple apear on your screen this should reset your iphone and you wont lose anything

Similar Messages

  • Phone constantly restart after update to 4.5 firmware

    I updated the firmware from 4.2 to 4.5 on my Blackberry 8800. After that, it constantly restart. If I press "back" key before "Loading programs" messages, sometimes work. But, few minutes later restart again.
    If I connect the phone with my PC, it keep on and work fine, but if disconect it, constantly restart again. 
    Please, could you help me? How do I solve it? The phone is barely useable after the update. Is it possible to downgrade the firmware or reinstall?
    Solved!
    Go to Solution.

    You are very welcome.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • HT4623 My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4972 my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
    Buy a new phone.

  • Mac won't restart after updating to OS X Mountain Lion

    Mac won't restart after updating to OS X Mountain Lion. Please help?

    Like what happens?  Is it just spinning?
    If you've waited sufficiently long (say 10 minutes) you could just hit the power button which will do the trick.  A little more gentle would be to open a terminal window (if you can) and type 'sudo reboot' (without the quotes) and enter your password when it asks.  That will do it too.

  • Adressbook doesnt work after update to 10.7.3 PB says your adressbook is 5.0.3. Can anyone please help?

    Adressbook doesnt work after update from Snow Lepard to Lion 10.7.3 PB says your adressbook is 5.0.3.
    PB says You have adressbook 10.5.3, yes, but now?
    Can anyone please help?

    Use the copy of AddressBook that is in your Applications folder, not the one on your Dock that's linked to a transplanted copy of the prevoius AddressBook App.

  • HT204347 My MacBook Pro won't restart  after update to lion

    My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

    Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

  • My phone was locked after updating ios 5.0

    my phone was locked after updating ios 5.0 can i get backto normal

    Charge it with a wall charger for at least 30 minutes.  Then, hold the on/off switch and home button together for at least 15 seconds untill you see the Apple Logo.
    Hope that works.

  • HT2827 i just updated my software for the apple tv and the light is flashing and it wont restart after update  thoughts?

    i tried to update my software for apple tv and it will not restart after update.  flashing lights

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • The front camera of my iPad 3 doesnt work after updated  ios7

    The front camera of my iPad 3 doesnt work after updated  ios7

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If neither fix it then you could try contacting Apple.

  • Ios 7, camera doesnt work after updating, iphone4

    My iphone 4 camera doesnt work after updating on ios 7

    completely erease the ipad and reinstall the OS.
    Go to settings>general>reset>erease all content and settings. Wait for the ipad to finish then see if it works.

  • HT201232 My I phone is restart after some time. Some times find out its off then if I press Home   Power button then again re-start. Some time after coming apple logo it take auto restart ...display become blue color.

    My I phone is restart after some time. Some times find out its off then if I press Home + Power button then again re-start. Some time after coming apple logo it take auto restart ...display become blue color. I have restored through I tunes and got I cloud backup. But stll have same problem.

    Try once again to restore using iTunes, but this time without using a backup, to make sure that this is not software related.
    If the phone still restarts on it's own, get it checked, this might then be hardware related after all.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • Installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

    installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT4623 What do I do to fix my phone that crashed after updating?

    What do I do to fix my phone that crashed after updating?

    Try placing the iPd in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    And then, if necessary try:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Printing HINDI Language is possible in Offline Interactive Adobe forms

    Hi All, Actually I am working on Offline Interactive Adobe forms.So my requirement is print the offline adobe forms in HINDI language. That form will goes to the user through email with some HINDI text, headings and fields names. After that user can

  • Imported Mail Not Appearing

    I have recently tried to import mail from a Mac using Mail (2.0.5) to a computer using Mail (1.3.11). The imported folders appear but no mail is visible in the folders. Is there anything I am missing or is this even possible? I have tried switching t

  • How can I get my phone working after water ingress

    Help..... My phone just went into the toilet basin... It didn't get very wet because of the cover I use, but it still had a dunking.. Right, when I re-set the phone using on/off key top, I get the blackberry name and a white screen, after about 20 se

  • Dynamic columns in column selector

    Hi All, I have a report with two column selector for X and Y axis . I want to change the columns in the column selector based on the value selected in the dashboard promt. Please help me ..

  • How to configure the virtual path with our web listener

    Oracle Apps Version: 11.5.10.2 Oracle database: 10.2 platform: Windows server 2003 while applying developer 6i patch ( 61954129 ) i got following error which says configure the following virtual path for your web listener following is the output of f