Phone frequently gets stuck on calling "calling"

I'm using a LG VN250 Cosmos, switched from a VX8350 recently.
This phone doesn't have EVDO and the PRL is a different version.
I recently noticed that it will frequently get stuck in "calling..." before timer starts rolling. Sometimes, it will go for about 90 seconds and "call failed" comes on. I have this happen even when I have four bars.
i don't recall having this problem with my 8350.
Anyone else experience this? What can I do to fix it? I've already done what 611 has got to say...
*228, 2
pull battery and reboot.

PDX_OR, thank you for sharing your concerns about your device. I would certainly like to help with this issue. Normally the steps you tried would resolve issues like this, so we will need to figure out whether this is a network issue or device issue. Do you notice this happening only in certain areas or everywhere you use the device? Did this start right after activating the phone?
Please let me know.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Similar Messages

My Phone is getting stuck in App mode and I have to reboot to get back to the regular screen? What ever app I'm in works but I cant exit?

My Iphone 4 is getting stuck in what ever App or screen I have open. I have to reboot to get back to the normal screen. I have done a reset with no change. Any advice?

I'm assuming your iPhone is not jailbroken?
You likely have an app that's misbehaving. Try restoring as new and see how it runs factory fresh.
Also, maybe your Home button is not functioning correctly. This has been a widely reported problem. Try cleaning under it with a vacuum or compressed air.
Note that you have a 1 year warranty - you may need to use it.

EFI Boot frequently gets stuck.

https://bbs.archlinux.org/viewtopic.php?id=159384
I found this thread and decided to post my own, as mine sometimes works and sometimes not.
I have a similar problem. It seems like this guy cannot boot his system at all. My problem is that it boots sometimes and sometimes it doesn't.
I try like 10 times in a row when it gets stuck (pushing the turn off button and restart) and it sometimes boots. I followed the beginner guide exactly as it was. I did not miss any step. The only thing I am suspicious about is that I updated my linux kernel using pacman. But I did update all the files as was stated on the website:
"Every time the kernel and initramfs files are updated in /boot, they need to be updated in /boot/efi/EFI/arch. This can be automated either using systemd or using incron (for non-systemd setups)."
The current kernel version is 3.7.10-1. Before kernel update, it was working perfectly fine, (well at least I was able to boot every single time, might have occurred if I had booted 500 times instead 50 times or so) Someone here can help?
[bob@arch ~]$ ls /boot/
efi initramfs-linux-fallback.img initramfs-linux.img vmlinuz-linux
[bob@arch ~]$ ls /boot/efi/EFI/arch/
initramfs-arch-fallback.img initramfs-arch.img refind_linux.conf vmlinuz-arch.efi
[bob@arch ~]$ cat /boot/efi/EFI/arch/refind_linux.conf
"Boot to X" "root=/dev/sda1 ro rootfstype=ext4 systemd.unit=graphical.target"
"Boot to console" "root=/dev/sda1 ro rootfstype=ext4 systemd.unit=mtuli-user.target"

One of my systems (with an ASUS motherboard) has sporadic boot problems, too; with mine, it boots about 90% of the time, but when launching the same kernel, it fails about 10% of the time, with no kernel messages appearing after rEFInd loads the kernel. I just live with it, and hit the Reset button when a boot fails.
If you're seeing something similar (inconsistent boot behavior from a single kernel), then please post details of your hardware. If you're seeing different behavior on different kernels, then the problem may be whatever's affecting those who've posted in the thread to which you've linked.

A iPhone 4S (currently in possession of it) was dropped into the ocean and we can get it into DFU and recovery mode, but we can't get it to go to the lock screen or home screen the phone just gets stuck on the apple symbol, how can I fix this?

Hey, apparently this iPhone 4S was dropped into the ocean and the light for the camera and a light where the 3G/4G bar is are both glowing. The iPhone 4S, I assume, was on iOS 5.1.1 I need help getting off info from it WITHOUT RESTORING IT. I'm not sure if Apple has any third party apps that they are allowed to suggest to us or if I'm on my own on this one, but if you guys can help I would greatly apperciate it.
Thanks!

Those are definitely features of liquid damage. First step after completely drying the iPhone would be battery replacement. The camera circuitry and proximity sensor circuitry are surging because you are seeing these lights.
New battery may get this booted back up so you can recover data, or even get the iPhone working again.

Iphone 6 gets stuck on text messages and will not function unless i turn the phone off

Are others experiencing difficulty with the I phone 6 getting "stuck" on text messages?

I also have the same problem on my 6+

Headphone sound option gets stuck even when headphones have been removed.

I use my headphone jack to play music from my pre on my car stereo. My pre is also bluetoothed for phone calls through my vehicle. The phone constantly gets stuck on the headphone option and will not switch to bluetooth even when the jack has been disconected. I then have to shut down the bluetooth and restart it to get the phone to work. What is the point of bluetooth if I have to manually fiddle with it while I am driving. The bluetooth should overide the headphone jack and then drop back to headphone when the call is over. My palm treo had absolutely no problems doing this. I have been complaining about this for awhile now perhaps on the wrong boards, under bluetooth sync problems. Please find a fix for this as it is really anoying.
Post relates to: Pre p100eww (Bell)

Yes I did try that when I had the no sound issue and it fixed it. This is a different issue. The real issue is that I cannot reliably use my bluetooth if I use any other option wether it be headphone or speaker or regular phone for that matter. The phone will get stuck on whatever option was being used and won't go to bluetooth even when you click on it in the phonecall mode. I have been complaining about this from the day I purchased the phone. I had complained about this at an earlier date in the bluetooth syncing issues section of the site not realizing at the time that this is not a sync issue but something else. I should be able to have my headjack plugged in and the bluetooth should overide ride it when a phone call comes in. My palm trio never had this issue and was being used in the same fassion. I really need a fix for this as I am probably in my car most of the time using my Pre exactly as I described to you. Sometimes it works, sometimes it doesn't and I never know when it's going to do it. I use my phone for business so this can also be a bit embarassing when I can't pick up a clients call or I have to hang up on a client because I can't get the phone to switch over. Any help with this would be greatly appreciated.

DLL created by labview get stuck

I tried to run test created with lab view with external tool.
This tool load dll and call execution function.
I created a dll from the Labview test (I used simple function for test that only extract numbers) and I used __stdcall
when I use this dll from an executable It works fine. (My application call a dll, and the dll call to the dll created from labview)
however when I use it from my dll it get stuck
I tried to load the dll dynamically with loadLibrary() and It works fine only for the first time (It gets stuck when I called it again)
I found that if I call it from the same thread it works fine, but if I call it from two different threads (the second call is long after the first call has finished, so there is no race condition) It gets stuck from the second thread.
I used visual studio to see where the call get stuck, and it is in lvrt.dll
Does anyone know what can I do to solve this problem.

Although the writeup is about .NET, the issue is the same, so check out http://detritus.blogs.com/lycangeek/2005/05/labview_and_asp.html
The problem might be that the first thread is not pumping messages and so the LabVIEW gets hung up waiting for events. This problem has been fixed in LV 8 so I'm assuming you're using an earlier version. If so, you can follow the steps outlined in the link above (creating a message pumping thread and calling your DLL with that first).
Brian Tyler
http://detritus.blogs.com/lycangeek

Samsung stratosphere keeps getting stuck in landscape mode?

All of a sudden a couple of days ago my phone started getting stuck in landscape mode, even when the auto rotation was off. I didn't mess with any of the settings to make this happen but sometimes I have to turn the screen on and off a couple of times before it goes back to regular mode. I even factory reset the phone today, but it is still going on.

Hmm it would do that too, but I actually just realized what the problem was when
I took the snap on case off. Apparently when I slide the keyboard down the
bottom part of the screen goes beyond the part where it's supposed to stop. I'm
guessing that caused some kind of censor to not work properly. But thanks for
the help.

Inbound Queues getting stuck up in PI7.1 for Idoc scenario Mpackg. enabled

Hi Experts,
We have an issue while processing Single Idocs in PI 7.1.
we have extended MATMAS05 and we are processing these via PI to FTP folder.
The inbound queues are frequently getting stuck.we will be sending atleast 1000 idocs every hour from R3.The processing time is very slow for this interface and its impacting other interfaces which we are currenlty having.
We have followed the webblog by William Li "Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging" but still the processing time for Single Idocs is very slow.
We have to use single idocs as we will send only the changed materials from R3.
Could you please assist us in overcoming this issue.
Many thanks in advance.
Points will be awarded for valuable feedback.
Cheers
Jyoti

Hi Jyoti,
Message Packaging works PI7.0 SP 13 and PI7.1 .
we have to configure Message Packaging manually ,
Step 1) 1. Enable packaging for the integration server
SXMB_ADM -> Change Configuration (F9), create a new entry:
Category: RUNTIME (PI7.1)
Parameters: PACKAGING Current Value: 1 (for active) .
Default Value in PI7.0
Current Value: 0 (for inactive)
Step 2) Create "Package Configuration Type u201C
Use Transaction SXMS_BCM .
Configuration Type : Any name.
Description: any text to describe the configuration type .
Wait Time : 60 seconds
Number: 100
Maximum Package Size. 2 MB
Step 3) Create "Sender/Receiver Definition
Transaction :   SXMSIF (Create New Entry).
Sender/Receiver ID:PACKAGE_DEMO .
Description :
Interface Name: Interface Name used in Receiver Determination.
Interface Namespace:   Interface Namespace used in the Receiver Determination .
Step 4: Create "Specific Package Configuration"
Transaction :    SXMS_BCONF .
Step 5: Package Monitoring
TX: XMSPKSTATCNF
Follow above steps and configire message packaging , then you feel diference,
actuualy i configured message mackaging,i am feeling the difference.
if any issues let me know.
Cheers,
Raj

TS1492 While Syncing my phone it get hung up attempting to connect to the iTunes store. Trouble-shooting states that I do not have a secure connection to the iTunes store.

While syncing my phone, it get stuck at step 3 while connecting to the iTunes store. Trouble-shooting states that I do have an internet connection but not a secure connection to the iTunes store.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Calling where no reception - call gets stuck

sometimes i make a call when exist no reception. the call gets stuck and i can not end it.
in IOS6 i found a quick way to release it buy shifting back and forth to airplane mode.
in IOS7 it's no longer working and i have to restart my phone.
any ideas ?

Hi Anthony,
May i know what is the flag u got in sxmb_moni of ECC.
>>I have discovered that every time the program is executed, it ends up with an entry in the qRFC of the sending system. I can execute that manually, and the message appears in the Integration Engine.
i understood that the message is strucked in ques( i.e SMQ1 or SMQ2) always.
In order to resolve this, we need to register the ques and activate it.
some ques like XBQ1,XBQA,XBQS*,............etc.
we have QRFC Adminstration option in SMQ1,SMQ2 and SXMB_ADM.
please register and activate it ...
award the points, if it helpful to you
Regards
Mahesh.

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... please help

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
please help

Has nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Phone frequently gets stuck on calling "calling"

Similar Messages

Maybe you are looking for