Phone Froze breifly when sending text with apple logo IOS7.0.3
This maybe hugely premature but i updated my phone yesterday to 7.0.3 and all seems fine. Just now i was typing a text message and as soon as i hit the send button i was greeted with a white screen and the apple logo. I left for a minute and the phone seemed to right itself. Is this somthing i should be concerned about ?.
Thought i would post this just incase someone else finds the same after upgrading. Never had this before and years of happiness using iphone.
Paul
Just got over this same situation. Called apple, they thought it needed to be sent in for repair, but it doesnt. I kept connecting it to iTunes and trying to perform the update and restore, it took me about 4-5 times to do it until my phone finally started working again. You might run into a few errors while Doing it, but it should work! Then you're going to have to "setup" your phone again.
Similar Messages
-
I saw a software update in general settings so i let it downloaded.. it took hours and now the screen with apple sign appears and going but the phone is not turning on.. iphone 4
Coincidentally I have had the same problem and I am also on Reliance network. I learnt the lesson in an expensive way (Read at Rs.17/min as this is the ISD rate of Reliance for calling to USA). I did mnp (mobile number portability, you oldie!) from Airtel to Reliance. So I had the inactive nano sim of Airtel. I took out the Reliance sim and inserted the Airtel sim into my iPhone 5s. By the time it was serching for the network, I quickly navigated to settings>phone and turned that damned dial assit off. That's it. Now when I inserted the Reliance sim and dialled the toll free numbers it was working perfectly, means free of cost. But I still wonder how come Reliance does not send the post call charge notification after the ISD calls? I had to call 198 to know about the balance deduction.
-
What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.
Trax and kirt are correct. I'm pretty good with technology, being an engineer and all, and I can tell you for a fact that this 'swoosh' sound (triggered by a successfully sent SMS) can NOT be disabled from ANY menu in iOS 5. The ONLY way to disable it is to flip the silent switch on the left hand side of the phone. This is extremely annoying for some people (like trax, kirt, and myself). For what we pay for Apple products and, in particular, this phone, we simply didn't expect to have to deal with such annoyances. That's why we're Mac users. Please fix this bug.
I feel like I shouldn't have to say this but it bears repeating: turning off message sounds from the 'sounds' menu does not fix his problem. It still emits the swoosh noise. Whoever suggested this clearly didn't try it because it obviously doesn't work. Who posts a solution to a problem without knowing for a fact that their solution is correct? I find that response condescending because he writer is assuming we're not smart enough to have tried it. In reality, it's vice versa. -
when i restored my iphone 5 it shows 4013 and 4005 error and my phone was stuck with apple logo and above some letters where also there in black and white colour . pls say me how to fix this plssss . my email = **********
<E-mail Edited by Host>Wrong Forum
-
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
Why is it that when sending text messages, sometimes they go through in blue and sometimes in green? What does that mean ?
My second question is, at times after sending a text it says: Sent as a text message.....I'm thinking, really? that's what I thought I sent in the first place !
Some one please help me out.......Hi JoFan0465,
Welcome to the Support Communities!
Good question!
Blue messages are iMessage conversations (Apple's messaging service)
Green messages are SMS - standard text messages.
SMS is the acronym for Short Message Service.
MMS is the acronym for Multimedia Message Service (audio, pictures, video can be added to messages).
With MMS turned on, you will see a little camera icon in the bottom left corner of your screen when you are in the Messages app. Also you will see the word iMessage where you type your text.
The link below will explain more:
Apple - iOS 6 - Messages with iMessage, for unlimited texting.
See the iPhone User Guide - pgs. 64-66 to learn more about Messages:
manuals.info.apple.com/en_US/iphone_user_guide.pdf
The article that you referenced, iOS: Using Messages explains all of the parameters and requirements for sending messages on your iPhone.
I hope this information helps ....
Have a great day!
- Judy
<Edited By Host> -
when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?
when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?
-
What is wrong with apple, the ios7 is so messed up, half our texts aren't going through!!!
what is wrong with apple, the ios7 is so messed up, half our texts aren't going through!!!
Also our ipad charger broke after only 9 months of use!
And our young son charged stuff on his ipad on our bank card accidentally instead of his itunes card,
and we called a month ago, and the charge was never refunded!
Can anyone tell us what's going on and who can help us!
I never thought we would ever been disappointed with Apple or the products and now within a month we are ready to give up on Apple altogether it's so frustrating and disappointing!
Message was edited by: patti12345For the texts:
1. Settings > Messages > iMessage = Off
2. Settings > General > Reset > Reset Network Settings
3. When the iPhone resets, Settings > Messages > iMessage = On
For the charger it is covered by warranty, use it. Is it the charger or the cable?
On the stuff your son charged call AppleCare and ask to be transferred to Customer Service. But do keep in mind when you talk to them they are not responsible for accidents in purchasing that your son made. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!
... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ... -
I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?
Maybe this might help.
http://support.apple.com/kb/TS2570 -
When i start my mac and i got white screen with apple logo
when i start my mac and i got white screen with apple logo n spening round n round
Try here
https://discussions.apple.com/thread/4917686?start=0&tstart=0 -
My iphone was stuck up with the black background with apple logo.what willl i do to open my phone?
my iphone was stuck up with the black background with apple logo.for 24 hrs. until now i can't open my phone what wil i do?
If it isn't recognized in iTunes see: http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).
-
Opacity level changing when exporting text with alpha
Hello,
I am hoping someone can shed some light on what is happening with my opacity levels when exporting text with an alpha. I have animated text where some words are black at 50% opacity and some words are white at full opacity. They are on a textured background. I need to give the other editors a version of the text married to the background and one that is just text with an alpha. When I export it and bring it into Premiere, the "married" version looks fine, but the black in the version of the text with alpha appears more transparent. I can fix this by changing the blend mode to Hard Light or Luminosity, but this alters the color of the white text slightly (and I should note that the blend mode in AE was normal). I can of course work around this by exporting my black and white text separately, but I was hoping someone might know why this is happening.
I am working on AE CC (ver12) and Premiere CC (ver7)
Thank you!Rick, I am judging visually.
I have since taken the cue from Mylenium, and I think the problem has to do with the fact that AE's default opacity is not linear and Premiere's is. When I change the sequence settings of Premiere and uncheck "Composite in Linear Color" the blacks of my clips match. Similarly when I change my Project Settings in AE and check "Linearize Working Space" the blacks appear lighter as they did when with the text only clip in Premiere. Since I am working with other editors that are using Premiere, I assume I should change the settings in After Effects to match Premiere (linear). Unless there is any reason I shouldn't do that?
Thank you,
-Keri -
Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Maybe you are looking for
-
How do I use an external monitor as my only display?
I have a MBP early 2011 with a thunderbolt to HDMI connector for a samsung LED monitor. I want to use the samsung as my only monitor when I am at my desk at home. I have an external keyboard/trackpad and would like a bigger workspace. As we all kn
-
PO line item text copied into Line item text on MIRO
i have entered line item text on the PO that i would like to get copied over to the line item of the invoice when created either thru MIRO or MIR7. I have looked and it looks like the copy rule for item text is in TEFP, but i have not got it to work
-
Fiscal year "A3" Variant is not maintained for Financila year 2010
Hello All, while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600". but i have configured Fical year variant and assigned to co code, i am able to
-
I was surprised to get error 1602 when upgrading an iPhone from 1.1.3 to 1.1.4. This did not happen on my or my wife's phone, but it did happen on both of my kids phones. After reading bizarre solutions used by other users, I decided to solve it. The
-
How to view "date from" and "date to"
Hi, I have loaded EMP data. In the mapping "date from" and "date to" are visible. But these fields are not seen when I display the EMP data.Can someone please tell me how to view these fields? Thanks, Williams