Phone icon doesn't work after ios8 update

After updating my phone to iOS 8 it is now not letting me access my phone icon it closes automatically after I open it. I tried hard resetting it it still didn't help. What do I do to fix it?

Hey Ch4rl3s3,
I would recommend that you try to restore the software on your iPhone as a troubleshooting step to see if the issue persists after that:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Similar Messages

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Phone Redirection doesn´t work after Publishing

I published an alreday working Version of my Website with Muse. The Redirection to the Phone Resolution doesn´s work anymore, although all Pages are still in place in the phone directory. The Redirection worked yesterday after the first publishing of the phone Resolution, but after the publishing today, only the desktop sides are available.
the URL is www.la-moellmann.de (la-moellmann.businesscatalyst.com)
I solved the Problem by adding the Muse javascript Redirect-Script from a non-BC Site (via FTP):
<script type="text/javascript">
Muse.Redirect.redirect('desktop', '', 'phone/index.html', '');
</script>
Nachricht geändert durch adobe_mhcom

Hey Ch4rl3s3,
I would recommend that you try to restore the software on your iPhone as a troubleshooting step to see if the issue persists after that:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

Internal camera doesn't work after Firmware Update

Hi everybody,
I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
thanks
MacBook Mac OS X (10.4.8)

Hi,
problem solved restarting with OptAlt+PR

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Flash doesn't work after I updated it

I am using Firefox 34.0.5 and updated my flash player but after the update it stopped working. The videos doesn't show up. I tried disabling all add-ons and found out that Shockwave Flash 16.0 is causing the problem. What should I do to make it work again?
I don't know why but some videos work just fine and other videos doesn't show anything even a white or black screen, even though they're from the same site. When a video doesn't show up, the cursor changes from the normal cursor to "working in background" cursor rapidly.

''Talha [[#answer-672921|said]]''
<blockquote>
Hey,
Did you try these typical Flash fixes?
(1) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button or classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(2) Disable protected mode (Win Vista & Win 7 & maybe Win 8)
See this support article from Adobe under the heading "Last Resort": Adobe Forums: https://forums.adobe.com/message/4468493#TemporaryWorkaround
Hope it helps.
</blockquote>
I did both of these but it still didn't work. I tried using another browser and found out that the problem only occurs in firefox.

Internet Connection doesn't work after windows update.

Hi everyone,
my boyfriend recently updated his laptop.
After the update his computer wouldn't work anymore. I went on the web and read some topics on the forums. And even tried some of them already.
I don't have Norton or Mcfee security software.
Operating system is Windows 7 and it's a 64-bitssystem.
I tried disabling ipv6 but that doesn't help. When i open the cmd and type ipconfig/all i get an overview of several adapters.
DHCP is enabled for everything but Tunnel-adapter for LAN-connection * 3: (sorry translating from dutch).
Also IP-routering and WINS-proxy are disabled.
Also i checked the recent updates. But for some reason the failing ones aren't amongst them.
Can someone pls help? Im wellknown with OS and can try to work with anything u name.
Thanks in Advance!
Nilu

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.

Nokia 5800 doesn't work after software update

hi,
couple of hours ago i downloaded ovi suite to update my phone's software. then my phone restarted as it was supposed to ,at first it didn't accept my lock code,and now it doesn't work AT ALL. i tried everything,all i see is the blue "nokia" thing then it freezes. it would be awesome if anyone could help. Thanks in advance.
Solved!
Go to Solution.

Try a hard reset
http://friedbrains-friedblogs.blogspot.com/2009/02/3-finger-salute-for-5800-full-hard.html
It WILL sort it
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Phone icon doesn't work after ios8 update

Similar Messages

Maybe you are looking for