Phone in recovery mode after update???

Update did not work, now i have discovered how to turn the phone back on as it wouldn't  it says i must restore it. Seriously?

NOT HAPPY JAN!!!!
Both my daughter and I had the same problem on different computers. Hers is an iPhone 4 and mine, a 5. Both got caught in recovery mode. I did follow the above mention troubleshooting however to no avail. Took it into the Apple shop yesterday and they restored it back to the factory setting for 6.0.1. Lost all of my content on the phone.
The Genisus stated that is it a Windows problem.
Yes, I agree, that Apple has lowered their delivery and service. It is true, that Apple is the new Microsoft, that it is ok to have problems when upgrading and when it hangs, just reload.
AVOID THE UPGRADE AT ALL COSTS.

Similar Messages

  • My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    Read this
    http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html

  • Iphone 6 plus struck in recovery mode after update to 8.1

    iphone 6 plus struck in recovery mode after update to 8.1
    i updated my iphone 6 plus to 8.1 from 8.0.1 and its struck in recovery mode.  inspite of restoring it again and again i get error 53.. im struck in the recovery loo. kindly help me..

    Hello arunmuthuvel,
    The article linked below details a whole host of information and a number of troubleshooting steps that can help get your iPhone restored.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/en-us/HT201210
    Cheers,
    Allen

  • How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating to iOS 8.0.2?

    How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating from iOS 8.0.1 to iOS 8.0.2?

    In you case, the only way is to use data recovery app to get back your lost photos, so the chance is uncertain. It depends on how smart the app it's. The good news is that most of the apps allow you to try them out. You can test them out by yourself. The steps are:
    Install data recovery app on your computer
    connect your iPhone and allow the app scan iphone
    display scanning result
    choose local folder to store recovered items
    You can choose to recover your photos from local disk, iTunes backup or icloud.  More details can be found out here.

  • Help!!! iPhone in recovery mode after update!!

    My iPhone went into recovery mode after updating!!! It's telling me to restore but I'll loose everything ive been trying to transfer! I can't loose these photos. Please tell me there's a way to fix it???

    Once in Recovery mode, personal data is invariably lost.
    It is recommended that personal data should be backed up often.

  • HT4623 Stuck in recovery mode after update. What do I do?

    Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.

    Hi there Rosie Bud,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    https://support.apple.com/kb/ht1808
    -Griff W. 

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • Please help, my ipad  mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

    please help, my ipad  mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

    Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd

  • My ipad is in recovery mode after updating software

    last night now will not start up,
    I tried holding down start/sleep button apple logo comes up for a second then disappears
    I plugged it into laptop and its now in recovery mode, which I don't want
    how do I get it out of recovery mode without losing everything

    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
     Cheers, Tom

  • Iphone in recovery mode after update to bug fix on IOS 7

    Iphone 4 has gone into recovery mode after updating a bug fix on IOS 7. Is there any way to fix it without having to restore?

    No. 
    http://support.apple.com/kb/ht1808
    1. Turn off device
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to device
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected the device in recovery mode"
    8. Use iTune to restore device
    Note: You need to be patient and repeat the above many times to recover your device
    Here's a link that discusses recover mode:  http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm

  • How do i get my phone out of recovery mode after updating it, how do i get my phone out of recovery mode after updating it

    how do i get my iphone of recovery mode? it went in to recovery mode after trying to update!!

    Try tinyumbrella. Connect your iphone, click on it when it appears in the recovery devices window, and click "exit recovery".

  • My iphone 4 stuck in recovery mode after updating to ios5.1

    i got my iphone 4 updated to ios 5 months ago and it was successful. However, i was updating my software to ios 5.1 using the phone itself and it went into recovery mode after that. The moment before updating it was fine and now it stuck in recovery mode, showing the itunes logo and usb cable.
    I connected my phone to the itunes on my laptop and it shows that my iphone is in recovery mode and must be restored.
    I've tried restoring it but after the restoration cycle was done, it pop up a window saying there's an error (1) occuring and my iphone was unable to be restored.
    I've tried it again and again for hours from yesterday evening until now but it's still the same. Anyone can help? I got no more phone to use at the moment.

    download a program called RecBoot, very easy to use, connect your iphone and click on "exit recovery mode" and it will restart normally. I had the same problem as you, but I solved it with this program.

  • Fix iPhone 4S in recovery mode after updating from IOS5 to 6.1.3

    How do i get my iPhone 4S out of recovery mode without losing all my data? I am not very tech savvy and too scared to do anything without instruction. My phone went into recovery mode when updating from IOS5 to 6.1.3 (or whatever was the latest yesterday). Oh how I wish I hadn't. I think I want my IOS5 back!
    Can I use Google Maps on 6.1.3?

    Okay I have read that info but the iTunes sreens I am experiencing has different messages.
    1st = iTunes has dectected an iPhone in recovery mode. You must restore the iPhone before it can be used in iTunes.
    2nd = iPhone is in recovery mode. Restore
    3rd = Are you sure you want to restore the iPhone "iPhone" to its factory settings? All of your media and other data will be erased, and the newest version of iPhone software will be installed.
    iTunes will verify the restore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, text messaes and other settings.
    .. now will my music, apps and photos be saved too? Here are the three messages.. you can see that the iTunes settings/screen configuation is not like those in the tutorial in the link. There is nothing in my "summary" and no restore to back up shown at this point. So I am wary to proceed.
    Thanks again to my helpers. Also I don't mind if the whole update was aborted.

  • HT1212 how do you put a phone a recovery mode after a a iPhone disabled screen pops up

    HOw do I put my phone into a recovery mode after a iphone 4 disabled screen pops up?

    At the end of the KB article you just read you will find this link that explains it:
    iOS: Unable to update or restore

  • HT4972 stuck in recovery mode after updating to iOS5

    I have updated my iPhone 4 with iOS 5 and the upated fully completed.  After completion, iTunes keeps telling me that it is detecting a phone in recovery mode and says it needs to be restored.  I go through that process and then I am back to iTunes telling me it has detected a phone in recovery mode.  What do I do?

    Disable your antivirus and firewall. Then when the Restore process asks set up as a new phone rather than restoring your backup.
    This presumes that the phone has never been jailbroken or hacked. If it has there may be no solution.

Maybe you are looking for

  • Cdrecord and others - error when starting burning

    HI, I need some help with this. I googled three hours for solution. I need to burn win iso image to DVD-R medium. Here is the error: $ cdrecord -v -sao dev=/dev/sr0 cswindows7professionalx86.iso TOC Type: 1 = CD-ROM scsidev: '/dev/sr0' devname: '/dev

  • Videoglide video in another program

    I have a piece of software that captures video using Quicktime from a camera with S-Video output. I also have a USB capture cable that I would like to use with a new computer that does not have S-Video inputs. I don't want to give up my one Firewire

  • Aspect Ratio Help

    I've tried to find this on my own, but to no avail. I am using a Canon XHA1 and shot footage in 16:9 HD format at 24fps. Imported it in using default Windows Video Import tool, then brought into Adobe Premiere Pro CS3 on Windows Vista. The footage lo

  • Production transports  referring to Dev Source system

    Hi All, We have Dev -> QA -> Prod setup for both BW and R/3. In BW corresponding source systems are created in each server. Transport Connection Source sytem mapping : In BW QA , I have mapped the source systems R3DEV to REQA. In BW PRD ,I have mappe

  • Compc task

    hi i use compc task to compile mxml files. the ant build file is <target name="appcompile">             <compc                 output="${catalina.home}/webapps/${app.name}/CampusPage.swf">                  <compiler.library-path dir="${FLEX_HOME}/fra