Phone is emitting a low toned beep during calls

yea, all calls i make, there is this low tone that beeps every 1-2 seconds.
anyone know what this is?

Called Tech support, and just had to reset network settings, that did the trick

Similar Messages

  • Bluetooth connectivity and beeping during calls after lollipop update

    After this update I have had problems with the bluetooth audio cutting out.  Also during calls a strange beeping sound can be heard every minute.  Is anyone else having this issue?

    Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards).  You aren't by chance getting notifications when the drop outs happen?  It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
    BTW how do you like the Gear circle (other than the cutout issue)?

  • Low quality sound during call

    Hello,
    Since the iOS 7 update that I've been noticed that the sound quality during calls is very poor to others, almost like I speaking away from the iphone without speaker, regardeless I keep earing everything loud and clear!
    I've already tested with other iphone 4/4S/5 iOS 7 users, and also running different iOS versions, as well as other phone brands, and the problem maintains!
    Upgraded to 7.0.3 today, despite the improvement/enhancements/bug corrections list dont mention any issue addressed to this problem, hoping to solve the problem, but nothing change, its pretty much the same as before!
    All settings are at the max, and also perform some tasks as suggested on apple support forums like tweaking the accessability options, by turning noise reduction off, but still the same!!
    My S/N is C34JPLSTDTWF.
    Hope I had described accuarately, in order to you perform the correct troubleshoot for this, this if you ain't already done it!
    Best regards,
    Pedro Sousa

    This happened to me as well and I confirmed others are experiencing same speaker/mic/bluetooth issues with both 4S and iPad 2, 3.  Applied the updated patch yesterday, things are worse because now I have NO sound via the speaker.  What's the FIX?!

  • Nokia N97 Repeated beeping during calls

    Yesterday when i was making a call, the call conected and started to ring, but along with this came rapid repeated beeps from the handset as if i had dialed a wrong number or something, but the call conected and i was talking to the other person, but with these annoying beeps that were too loud to hold the phone to my ear to make the call worth while anyway. I hung up and tried again, same thing, tried different numbers and the same again. I switched the phone off and back on which seemed to have solved this, but is this going to be a recurring problem? It was only a few days previous to this that i couldnt make calls at all untill i swithced the phone off and back on as it made the same similar beep but not as loud and wouldnt connect to the other persons number, as if i had no signal, this got very frustrating as i was trying a few different numbers, then tried to call my friend next to me at the time and it called his number fine first time with no beeps. Has anyone else experienced this so far?
    Ive been around 2 weeks without a bug on this phone and now this starts to happen, along with the alarm clock problem that happened this morning. I am still on firmware V11 

    carves wrote:
    cgg123 wrote:
    I am still on v11, waiting patiently for Nokia UK to release v12.
    Chris
    You dont have to wait for V12 since V2.0 is just around the corner (October) according to NW09.
    version 2.0 will be releasing in october, if your phone is unlocked. if you got it on contract it wil be up to your carrier.
    those beeps could be a result of the settings. not too sure where it is (don't own an n97), but in the call settings check if minute beeps are on (where the phone beeps every minute) its a feature i know some people use as a means of monitoring their call time.   
    everything happens for a reason
    check out my blog @ http://mycellife.blogspot.com/

  • SPA2102:BEEP during calls

    Hello.
    I have a SPA2102.
    The issue is that incoming callers sometimes hear a BEEP when speaking to me thru the SPA2102.  They say it sounds like I am pressing a touch-tone button.  It only produces one beep, and it seems to happen randomly.
    I am on software version 5.2.5 and hardware version 1.2.5(a)
    Any ideas?

    nevermind blitz - i found them - THX
    i have changed the DTMF tx mode to inband.
    But why would I lower down the FXS input gain on the SPA?
    and what do you mean by 'this one is call" talk off"'?
    Ron
    I'll let you know how my one change worked.
    btw here's a link to a similar problem.  it might help others.
    http://blogtech.oc9.com/index.php?option=com_content&view=article&id=74%3Aas20071016&Itemid=8
    Message Edited by Ronatola on 09-26-2008 08:05 AM

  • Phone signal "searching" message and cut off during calls

    Phone calls

    I'm sorry for misunderstanding you, but you said she went to the Apple store and the third time she bought a new phone. Did the new phone work then? Is the issue still persisting on the old device? That's where I'm confused. Did she get the device replaced or just buy a new phone and the problem is still happening on the old device.

  • 6 plus turns off during calls

    i am on my second 6plus and having the same issue.  My issue is that the phone shuts off 20% of the time during calls.  The phone will be dark for 20 seconds and then the apple logo appears to start back up, like it is rebooting.  After the logo reappears the phone home screen comes back up and the caller is still there.  So I don't ever loose the call, I just loose the ability to hear or saying anything.  Plus the phone is dark like it is completely turned off.  I know another phone will not fix this, anyone know the software issue? sprint is the carrier

    Hello Mwcourter,
    Having your device replaced multiple times can certainly be frustrating. After reviewing your post, it sounds as though your device is resetting during use. I have located an article that can help with software issues. Have you attempted to restore the device to factory settings without restoring from a backup? Test the issue on a new installation, and make sure that it works. Then use the same article to restore from your backup to either verify it still works, or isolate the issue to the backup itself.
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Phone beeps during phone calls

    My Galaxy S4 periodically beeps during my phone conversations - both myself and the recipient can hear the beeps - how do I turn that off?? My phone is fully charged and I don't have any notifications (new text messages, new voicemails, missed calls, etc.)

        @GCSALK,
    Let's get to the bottom of this!
    I need some additional information to better assist you. Are you hearing the beeps on every call? Does the beeping sound go on during the entire call or does it stop after a while?
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • 6233 model - Phone sound (during Calls) very low

    Hi,
    the sound I hear during calls is very low despite I have set tones and key pad sounds to the maximum.
    Whereas the same in loud speaker mode or hands free mode is very good.
    Plz help me
    Model 6233

    Check if you could put in to factory setting, if it would help.
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • Beeping heard during call

    For the first time tonight, I heard a strange beep during a phone call. It was a brief number 3 or 4 higher-toned beeps and was not audible to the person on the other end of the call. My Galaxy S3 had WiFi turned on, Bluetooth and GPS were turned off, and there was nobody on call waiting. Lastly, my battery was at 30% and was not low enough to trigger an alert.Any ideas on what this beeping might be? Could this be an instance of monitoring? How could I know if my calls were being monitored?

        Thanks so much for trying the steps that mrsdawg2 suggested.
    I have to ask, do you still hear the beeps when on a call? Does it happen on all calls? If you enable speakerphone, can you still hear the beeps?
    Tamara_VZW
    Please follow us on twitter @VZWSupport

  • How to disable loud speaker beep during install

    Is there a way to disable the the speaker beeping during install? Or at least lower its volume? Its extremely loud. Ive already removed the pcspkr module, but the beeping is still present.
    (I reinstall arch often and this is why I'm asking )

    echo "options snd-pcsp index=2" >> /etc/modprobe.d/modprobe.conf

  • My Torch will randomly vibrate and make a low long beep randomly

    A few months ago I noticed my phone do this, but I didn't’t know it was my phone. I vibrates for ten to fifteen seconds or so and lets out a low consent beep. I am not playing in games and there is no notifications of any kind. At first I thought it was because my phone was on the charger, but it has done it off the charger and with many different levels of battery power. It has even done it when my phone was on silent. Every time it has happened I haven’t even been touching my phone.  Does anyone know what it can be?

    Hello Wendybird,
    In this case we can try to reload the software on the BlackBerry smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with selective restore, here is how to restore http://bbry.lv/qgQxLo
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My Office for Mac 2008 disk has a scratch in the paper on the top.  When I load it in my MacBook Pro the drive makes a low pitched beep?  Can I repair the surface ( the bottom is fine and it is not cracked).  Are there any other options.

    I have a 2009 MacBook Pro which has been working fine.  Had to reformat HD and reload software.  Am using Mountain Lion which MS said supports Office Mac 2008.  When loading it the drive ran then began making a low frequency beep, then ejected the disk.  Upon inspection I see a scratch in the paper on the top of the disk, but there is no crack and the bottom surface is clean without scratches.
    I assume this problem is from this damage.  If so what can I do to repair it so it will work in the drive.
    If not what else would cause this problem.  Thanks for you help. Emom6

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • I-phone not being recognized by computer , crashed during an update...

    i-phone not being recognized by computer , crashed during an update...

    i am boycotting apple after i fix this issue. they are a terrible company.

Maybe you are looking for

  • "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fantastic experience" message with IE 11

    Hi All, I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fan

  • Validation On Tabular Form

    How to implement validation such on TABULAR FORM select case when lead (IHL_PDATE) over (order by IHL_PDATE) > IHL_PDATE OR lead (IHL_PDATE) over (order by IHL_PDATE) is null 'Ok' else 'Not Ok' end after or before submitting form?* I implement it on

  • Can't open any high graphycal application

    When i'm opening an any graphical software on my mac book pro, like Photoshop, illustrator...even the photo booth, the computer will be suddenly off and restarting after few minutes. i upgraded the os to all available versions (10.6.8 / 10.7 - 10.7.4

  • CAT2 in web browser

    We are using now CATS in SAP, but what steps are required to start using web based CATS? I am not talking about off-line version, but the online one. Is there any specific configuration to use web CATS or it is all on the very technical side? Thank y

  • Start stop event structure queue

    Hello, I would like for the attached vi to start logging/displaying data when the Start button is pushed, not when the VI starts. So I did some research and was led to the Event Structure (this is my 1st time using an event structure). I have been tr