Phone Listener Issues

I am asking for one of the Admins who are very knowledgeable in 3rd party listener apps or BB development to please contact me about one that has been placed on my phone.. please, please, please..

i want a feature pack 1
Moderator's note: We provided a topic-related subject to the post so other users can easily identify and answer the query.

Similar Messages

IPhone 6 and Bluetooth phone connectivity issues with my vehicle: this is how I fixed it.

With so many threads on this topic, I wanted to detail the steps I took to fix my iPhone 6 Bluetooth issues regarding connectivity to my vehicle and handsfree calling. My phone was pairing with my vehicle without a problem and syncing my contacts and call history but when I attempted to make a call (from either the phone or the vehicle screen) the audio went out and I could not hear the call either through the vehicle speakers or on the phone. The call was going through but I was unable to see it on my vehicle screen and/or hear it either the phone or the vehicle screen.
Based on my research and what I have learned so far, the people having problems are those who restored their new iPhone 6 from an iCloud backup from a previous phone, rather than setting up their iPhone 6 as a new phone. I did an iCloud restore from my previous 5s running iOS 8.
First, I am a Verizon customer and I enabled Advanced Calling on my line. After I requested that this feature be added to my line, under “Cellular” settings on my iPhone, I enabled LTE voice & data.
Next steps:
1) Unpair/remove iPhone from the vehicle;
2) Forget/remove the vehicle from the phone Bluetooth settings;
3) Soft reset the iPhone;
4) Reset network settings on the iPhone; and
5) Pair the phone to the vehicle again and attempt to make a call.
If that does not work…
6) Perform a factory reset, erasing EVERYTHING from your phone and set it up as a new iPhone rather than restoring from a backup.
Resetting the network settings seems to be working for some people. It did not work for me. I tried it a few times with no result. I did the dreaded factory reset, paired the phone with my vehicle and had all of my Bluetooth functionality back and was able to use the handsfree phone with zero issues.
I was on the phone yesterday multiple times with Apple, Toyota Entune, Verizon and my Toyota dealer. Verizon blamed Toyota Entune, Toyota Entune blamed Verizon and my Toyota dealer blamed Apple. Nobody had a clue how to fix this issue or what was causing it. I don’t know the exact reason why the previous iCloud backups are killing the Bluetooth connections, I just know what worked for me and I thought it was worth sharing.
Good luck.

The new 8.0.2 update DID NOT FIX THIS ISSUE AT ALL. After you power off and on with the phone, same issue as the 8.0, all 3 of my cars lost Bluetooth connection and shows no signal at all. Good job Apple, what a lousy update you guys did.
2011 Lexus ES350
2011 Subaru STI
2012 Mercedes E350.

Phone Connectivity Issues

While I love the iPhone, I've been having some problems with the actual phone portion of this little device.
I drop 2 - 3 calls a day (in areas that AT&T states there is coverage).
Callers complain of an echo problem on their end which I can also hear on my end at times.
I loose service at times which causes me to put the phone into airplane mode and back or even power it off to restore.
Has anybody else had similiar problems. Wondering if I need to make another trip to the apple store for support.

The new 8.0.2 update DID NOT FIX THIS ISSUE AT ALL. After you power off and on with the phone, same issue as the 8.0, all 3 of my cars lost Bluetooth connection and shows no signal at all. Good job Apple, what a lousy update you guys did.
2011 Lexus ES350
2011 Subaru STI
2012 Mercedes E350.

Frustrating Phone Upgrade issue

We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

ODBC-datasource generating ORA-12154 (possible listener issue)

Hi,
I am trying to configure ao ODBC-datasoure from a client (using instant client 11.2) to a 11.2g Oracle DB server. The database listener is configured to use a non standard port 1700 in this case.
There is a firewall between the client and the server which is configured to allow connections to the database server on the specified port, when I use telnet from the client to the server, the connection opens on this port, but when I try to test the odbc-datasource I have configured ig et the error ORA-12154.
The link below outlines the details of the error:
http://ora-12154.ora-code.com/
To the context should be added, that there is no problem to use SQL Plus from a computer behind the firewall to connect to the database server using the TNS name that is being used in the ODBC-datasource.
I have tried to configure the odbc-datasource using both a tns_names.ora file, and also directly in the odbc-datasource using //[ip address] : [port]/TNS_NAME. Both ways of configuring the odbc-datasource generates the same error. I am currently suspecting that the error might be due to some sort of connection redirection on the part of the tns listener on the database server which triggers the firewall to terminate the connection. Could this be the case?
Does anyone have any suggestions what this error might be caused by. Any suggestions on how to continue my troubleshooting would also be valueble. Further, what kind of configuration would need to be inplace, on the tns-listener / database server side to make this sort of configuration to work.
Finally, I should also ask that I have tested the same ODBC-datasource configuration in a test system without any firewall inbetween, and that configuration works fine, so there seems to be no problem with the client software configuration per se.
Any help is apprichated.
/Eaglecoth

Cabelcow wrote:
I managed to solve this issue myself.
Since there seems to be some problem locating the server I added "HOSTNAME" to the following line in the SQLNET.ORA file on the server:
names.directory_path = (HOSTNAME,TNSNAMES)
This solved the issue by using the following syntax in the ODBC Configuration:
TNS Service Name: [ip-address]:[port]/[TNS NAME]
Where the TNS_NAME should be that of the TNS_NAME for the database defined in the TNSNAMES_ORA at the server. Note that this value is case sensetivetnsnames.ora is ONLY used by the client side application. It is the tns complement to the local 'hosts' file. It is used by the CLIENT to resolve an alias (tns net service name) to a host (ultimately an ip), port, and service name. Your assertion that the tns_name should be ... hmm, now that I read that again, are you saying that the tnsnames entry on the client should match the one in the tnsnames file on the server? If so, yes and no. There is no technical requirement that they match. It is simply that it is usually assumed that the one on the server is correct and may be used as a model for what to do on the client. The server - acting as a server - doesn't even use the tnsnames.ora file. It exists on the server only to support any client process that may happen to be running on the same box as the db.
Maybe this will help you understand the connections
=================================
ORA-12154: TNS:could not resolve the connect identifier specified
This error means one thing, and one thing only. The client could not find the specified entry in the tnsnames.ora file being used.
As a follow-on to that statement, remember that when you use a dblink, the database in which the link is defined is acting as a client to the database that is the target of the link. So in this case, the tnsnames.ora file on the host of your source should have an entry for your target db, as defined in the db_link.
And for the umpteenth time ... this error has NOTHING to do with the status of a listener. The connection request never got far enough to reach a listener. If anyone tells you to check a listener in response to ora-12154, they are not paying attention, or do not understand how TNS works. This error is the equivalent of not being able to place a telephone call because you don't know the number of the party you want to reach. You wouldn't debug that situation by going to the other guy's house and testing his telephone, or by going to the phone company and testing the switchboard. And you don't debug a ORA-12154 by checking the listener. If I had a top ten list of "Incredibly Simple Concepts (tm)" that should be burned into the brain of everyone who claims to be an Oracle DBA, it would include "ORA-12154 Has Nothing To Do With The Listener".
=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Additional notes on the listener: One listener is capable of listening on multiple ports. But please notice that it is the listener using these ports, not the database instance. You can't bind a specific listener port to a specific db instance. Similarly, one listener is capable of listnening on multiple IP addresses (in the case of a server with multiple NICs) But just like the port, you can't bind a specific ip address to a specific db instance.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
 (CONNECT_DATA =
 (SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Finding it, tns sends a request through the normal network stack to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the standard networking process delivers the message to port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, the listener will spawn a server process to act as the intermediary between your client and the database instance. Communication to the server process will be on a randomly selected available port. At that point the listener is out of the process and continues to user port 1521 to await other connection requests.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
Third: If the client is on the same machine as the db instance, it is possible to connect without referencing tnsnames and without going through the listener.
Now, when you issue a connect, say like this:
$> sqlplus scott/tigertns will attempt to establish an IPC connection to the db instance. How does it know the name of the instance? It uses the current value of the enviornment variable ORACLE_SID. So...
$> export ORACLE_SID=fred
$> sqlplus scott/tigerIt will attempt to connect to the instance known as "fred". If there is no such instance, it will, of course, fail. Also, if there is no value set for ORACLE_SID, the connect will fail.
check executing instances to get the SID
[oracle@vmlnx01 ~]$ ps -ef|grep pmon|grep -v grep
oracle 4236 1 0 10:30 ? 00:00:00 ora_pmon_vlnxora1set ORACLE_SID appropriately, and connect
[oracle@vmlnx01 ~]$ export ORACLE_SID='vlnxora1
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:37 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsNow set ORACLE_SID to a bogus value, and try to connect
SQL> exit
[oracle@vmlnx01 ~]$ export ORACLE_SID=FUBAR
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:57 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name: Now set ORACLE_SID to null, and try to connect
[oracle@vmlnx01 ~]$ export ORACLE_SID=
[oracle@vmlnx01 ~]$ sqlplus /scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:43:24 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12162: TNS:net service name is incorrectly specifiedOk, that is how we get from the client connection request to the listener. What about the listener's part of all this?
The listener is very simple. It's job is to listen for connection requests and make the connection (server process) between the client and the database instance. Once that connection is made, the listener is out of the picture. If you were to kill the listener, all existing connections would continue. The listener is configured with the listener.ora file, but if that file doesn't exist, the listener is quite capable of starting up with all default values. One common mistake with the listner configuration is to specify "HOST=localhost" or "HOST=127.0.01". This is a NONROUTABLE ip address. LOCALHOST and ip address 127.0.0.1 always mean "this machine on which I am sitting". So, all computers are known as "localhost" or "127.0.0.1". If you specify this address, the listener will only be capable of receiving requests from the machine on which it is running. If you specified that address in your tnsnames file - on a remote client machine - the request would be routed to the machine on which the requesting client resides. Probably not what you want.
=====================================

Speakers phone button issues

my iphone 4 os 7.0.4 when i try to make phone call the speaker phone button automatically comes on. but there is no sound and no one can hear me. same thing when phone call comes in the speaker phone lights up but no sound with it on or off. sound works perfect for everything else. i can touch botton to turn off and back on but does no good
help please

there are no devices paired via bluetooth. i do not even turn my bluetooth on. Also in the accessibilities features there are no buttons turned on. This is the main puzzler. I can listen to music, hear the sounds on apps and games and videos. but when i try to make a call the speaker button is on automatically and there is no sound. I can turn it off in during the call and still have no ound, also the person on the other end can not hear anything at all from me. Also when i try to cal my voicemail its the same thing.the timer on the top of the calls steadily counts but noone can hear me and i cant hear them or voicemail. I did however go to the genious bar on 1/21/2013. and when I first got there and hour and half early it was still haing issues but then when I showed back up for my appointment at 230, my phone decided to work properly for few minutes then the issue started again. So he went in and tapped the reset all settings button. well once that finished it worked again. So i asked if it does it again what do i do and he showed me the same thing. Well here's still the problem. I have reset the setting about 5 times since yesterday. and still have the speakerphone button lighting up and no sound on incoming and outgoing calls and voicemail only. So he also said to try a total restore and start back over from factory setting, ok so I have now done that also. So now what else is there to do to maybe fix this issue. I have not had good help even from the apple Genious bar.
please help if possible

Iphone 4s phone call issues

I just bought an iphone4s, white, 32gb. Sometimes when I make a phone call the person that I am ringing cannot hear me but I can hear them. I have to turn the phone off and then on again, then call them before they can hear me. I dont have the phone in a cover as yet. Is anyone else having the same problem and is there a solution?

brconflict1 wrote:
Since the latest updates to iOS, I'm hearding more issues reported to my company where iPhone users are not able to be routed correctly in our IVR. From the PBX, I'm seeing such as the following example: Callers dialing an extension 312, for example are able to dial 31, but the 2 is not responding on the iPhone. When the caller does eventually get the 2 to go through, the PBX states 31 is an invalid extension, and then registeres the 2 as a new entry, which is our Sales Queue option. I have confirmed this on my iPhone 4S.
Dialing in the main keypas dialer on the iPhone is fine. However, the additional, smaller keypad for IVR nagivation use is not.
IF the keypad is fine on the iphone, but not smaller keyboard whatever that is, what makes it an iphone/Apple or software issue.

IPhone 4 Phone Call Issues

About a week ago I noticed my iphone 4 (updated IOS) was having issues with phone calls. I would make a call to someone and mid-call they could no longer hear me. In other cases, I made a call to someone and they never could hear me at all. Other cases, someone calls me and they cannot hear me. Finally ther are cases where I call someone and mid-call there is a bunch of static and they cannot hear me.
I spoke with Apple and they told me that I needed to restore the phone and install it as a new iPhone. This should deal with the issue. I did such steps and then synced the phone and tried to make a call. The first three calls nobody could hear me. The next call they could hear me for 2 minutes and then static and nothing.
I have had a new SIM card installed and have reset the network as well. In reading the Apple Support Community postings, it looks like the only long term solution is to acquire a new phone. Is there any other solution anyone knows of to help remedy this situation. I have had the iPhone 4 for 2 years without an issue and in the last week, this crops up. It has not been in water, it has a case on it, I am not covering up the mics, the speaker phone is off.
Next to getting a new phone, any ideas?

There is nothing to sort out.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue still occurs, take the device to Apple for evaluation as there is obviously a hardware issue.

Is there really not an email address for tech support that you (or I, if absolutely need be) could forward my below email to? ( I really do not want to waste time being put on hold on the phone.) Issues times 3 - Regarding iPad 2 with IOS 7: 1.) I can

Is there really not an email address for tech support? ( I really do not want to waste time being put on hold on the phone.)
However, I have 3 Issues Regarding iPad 2 with IOS 7:
1.) I can no longer open up the apps from the update page. (I used to be
able to & it was a quick way of making certain that I wanted to keep an app
before I updated it.
2.) I have many apps that I have updated since installing the new
operating system & they now have "open" symbols next to them, but I don't
know how to get them off of my update list (since that has already been
done to them).
3.) My iPad has gotten stuck or frozen more in this last week since the
new update then has in the last 2 years put together. (It seems to be stemming from the "Updates" page as sometimes that page is just white & will not open, even though everything else opens & I have an internet connection.)

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
 Cheers, Tom

Oracle 8i listener issue: TNS-01168: Cannot allocate memory

We have a loader application coded in perl/c which connects to DB to load data from flat files. Whenever we have multiple such loader programs running, the listener dies and loading stops. The listener.log is around 2GB. I opened the loag and got following details:
Listener Log file (2GB file):
-- File begining ---
ECHO is on.
17-FEB-2005 20:40:20 * service_update * scanview * 0
17-FEB-2005 20:50:20 * service_update * scanview * 0
17-FEB-2005 21:00:10 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2659)) * establish * scanview * 0
19-FEB-2005 03:14:26 * service_update * scanview * 0
19-FEB-2005 04:00:09 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2486)) * establish * scanview * 0
19-FEB-2005 04:04:27 * service_update * scanview * 0
19-FEB-2005 04:07:07 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2644)) * establish * scanview * 0
19-FEB-2005 04:18:21 * 51
Error Started at Line #: 2096
19-FEB-2005 04:18:21 * 51
NL-00051: internal error code, arguments: [302], [1], [], [], [], [], []
Above error continued till Line #: 913372
19-FEB-2005 04:21:15 * 1168
TNS-01168: Cannot allocate memory
19-FEB-2005 06:05:30 * 1168
TNS-01168: Cannot allocate memory
TNSLSNR for 32-bit Windows: Version 8.1.7.4.0 - Production on 19-FEB-2005 11:13:49
-- File ended ---
Is there a known bug and if so what is the resolution? Will upgrading to Net 9i help?
Let me know if anyone has faced such issue and the resolution.
Thanks
Satish

alll listeners show the TNS-12531 cannot allocate memory message in the listener.log.Only a single listener is required.
How many listeners run on this system & why more than 1?
oerr tns 12531
12531, 00000, "TNS:cannot allocate memory"
// *Cause: Sufficient memory could not be allocated to perform the desired
// activity.
// *Action: Either free some resource for TNS, or add more memory to the
// machine. For further details, turn on tracing and reexecute the operation.

Email Settings Wiped Out on Regular Basis - Phone Network Issue?

Not sure where to post, but the CEO of our company has had an ongoing issue with his Droid X, and actually I suspect it being a phone network problem. On a consistent basis when he travels from our office to his weekend home about 100 miles from us, his phone loses the POP3 email settings for our company email which is setup on his phone. The account settings appear normal, yet we have to re-enter them and then turn the phone off and on again in order to get the email to go through. VERY FRUSTRATING. Anyone else have this issue? Specifically we are traveling from Birmingham, AL to Selma, AL. There is nothing he is doing to his phone causing the issue and it is not the email account as we have other users on the Verizon network in the area that do not have the problem, though they do not travel that route.
I would GREATLY appreciate hearing from anyone as Verizon customer service at the local store claims they have never heard of the issue.

not all require secure/auth
Click on ISP name link for more detailed set-up instructions:
POP3/IMAP Account Server Type Incoming Server Incoming Port Use secure server Verify Cert. Outgoing Server Outgoing Port Use secure server Verify Cert.
Aim.com IMAP4 imap.aim.com 993 (or 143) Yes Yes smtp.aim.com 465 (or 587) Yes Yes
aol.com IMAP4 imap.aol.com 993 (or 143) Yes Yes smtp.aol.com 465 (or 587) Yes Yes
Aim.com POP3 pop.aim.com 995 Yes Yes smtp.aim.com 587 Yes Yes
aol.com POP3 pop.aol.com 995 Yes Yes smtp.aol.com 587 Yes Yes
att.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
bellsouth.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
charter.net IMAP4 mobile.charter.net 993 No No mobile.charter.net 587 No No
charter.net POP3 mail.charterinternet.com 110 No No smtp.charterinternet.com 25 No No
comcast.net POP3 mail.comcast.net 995 (or 110) No No smtp.comcast.net 587 No No
cox.net POP3 varies by location 995 (or 110) Yes Yes varies by location 587 (or 465) No No
earthlink.net POP3 pop.earthlink.net 110 No No smtpauth.earthlink.net 587 (or 25) No No
excite.com POP3 pop3.excite.com 110 No Yes smtp.excite.com 25 (or 587) No Yes
flash.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
gmail IMAP4 imap.gmail.com 993 Yes Yes smtp.gmail.com 465 Yes Yes
Go Daddy Accounts POP3 pop.secureserver.net 995 (or 110 w/out Secure connection) Yes Yes smtpout.secureserver.net 465 (or 25 w/out Secure connection) Yes Yes
hotmail POP3 pop3.live.com 995 Yes Yes smtp.live.com 587 No Yes
lycos.com POP3 pop.mail.lycos.com 110 No Yes smtp.mail.lycos.com 25 (or 587) No Yes
mac IMAP4 mail.mac.com 993 Yes Yes smtp.mac.com 25 (or 587)
No No
me IMAP4 mail.me.com 993 Yes Yes smtp.me.com 25 (or 587) No Yes
mindspring POP3 pop.mindspring.com 110 No No smtpauth.earthlink.net 587 (or 25) No No
msn.com POP3 pop3.live.com 995 Yes Yes smtp.live.com 587 No Yes
netzero.net POP3 pop.netzero.com 110 No Yes authsmtp.netzero.com 587 No Yes
optonline POP3 mail.optonline.net 110 No No mail.optonline.net 587 No No
pacbell.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
Roadrunner POP3 varies by location 110 No No varies by location 587 (or 25) No No
sbcglobal.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
snet.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
swbell.net POP3 pop.att.yahoo.com 995 Yes Yes smtp.att.yahoo.com 465 Yes Yes
verizon.net POP3 incoming.verizon.net 110 No Yes outgoing.verizon.net 25 (or 587) No Yes
windstream.net POP3 pop.windstream.net 110 No No smtp.windstream.net 587 Yes Yes
yahoo.com IMAP4 imap.mail.yahoo.com 143 No No smtp.mobile.mail.yahoo.com 587 No Yes

Phone memory issue in Nokia E5

The phone memory of my E5 is decreasing day by day. Menu->Options->Memory Details->Main memory shows 135 MB files in Others section, but I am unable to view any such large files even using third party browser like Xplore. I do not have any pictures, songs or videos in phone memory neither any large applications (apart from the pre-installed apps). The firmware version is 042.014, will upgrading the firmware resolve my issue. Please suggest.

Hi jimmyireland,
Thanks a lot for your quick reply...the solutions provided in the article helped to recover only a few MB of memory...but a huge amount around 133 MB is still being occupied by the Other Files which is not even viewable by Xplore or any other third party file browser and the volume of this Other Files keeps on incresing every day...I am afraid that one day it will consume the entire phone memory...unless Nokia comes up with a fix for the same very soon....

Phone adapter issues

When I put the wall adapter into the battery port the phone will begin to charge but as soon as I put it down it stops. I have to hold the charger at an angle for the phone to stay charging. Any thoughts? (Plus ever since I updated the phone, I don't see the battery meter).
Message was edited by: Corban

I just wanted to follow-up here for everyone's benefit.
I proceeded with the instructions for hard reset and disabled my firewall (Norton 2008) as instructed. I still could not change the security settings and to make matters worse, my PC connection to the router throughout configuration kept degrading and I kept losing the webpage. I tried different Ethernet ports on the router nad had the same problem. I then connected my PC to spare ports on my Vonage router and had no problems so I think it is a router issue.
Any more suggestions? Looks like it is time for a new wireless device. Little disappointed this failed after 2.5 years in service. Would have expected a little longer life.
Thanks,
epie

I PHONE AUDIO ISSUES WITH MOVIES

I CONVERTED MY MUSIC VIDEOS IN I TUNES (RT CLICKED AND SELECTED FORMAT FOR I PHONE). THE VIDEO PORTION WAS TRANSFERRED OVER TO THE PHONE BUT NO AUDIO. I NOW HAVE DUPLICATES OF EVERY VIDEO IN I TUNES. THE DUPLICATE VIDEO IN I TUNES DOES NOT HAVE AUDIO EITHER.I HAVE JUST BEGUN TO RESEARCH THIS AND IS THE ONLY SOLUTION TO PUCHASE QUICK TIME PRO ??

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(27587)

ADF Mobile - Phone Performance Issues

Hello,
I've been using ADF Mobile for a while now. All's going well - I'm able to access web-based data services etc and everything seems to work. I do have a couple of couple of questions regarding performance on the phone though and I was wondering if anyone could offer some help/advice etc.
I've followed all the steps here: https://blogs.oracle.com/mobile/entry/configuration_tips_for_better_performance
...but with no visibile improvements. My issues are:
<1> Once the app is deployed, starting it for the first time takes around 2 minutes. All subsequent start-ups of the app after this take a couple of seconds, even after a shutdown of the phone. I'm not sure how to determine what exactly is happening during this phase, and why this takes so long just the first time? The duration for this also seems to have increased as I've added pages to my app, and as it only has 4 at the moment I'm concerned that adding much more to it will make the problem worse.
<2> I use "listItems" on most pages in a "panelGroupLayout", and the scrolling performance is very poor. All other apps I have on my phone scroll very smoothly. With my ADF app, you drag your finger to scroll up or down and there's a noticeable delay before all the rows move in one go with no visible scrolling actually taking place. This happens even when all the rows to be displayed are loaded on to the page and there's no more calling of the web service necessary. I've deployed the sample "DeviceDemo" to my phone and the "Properties" page has the same problem. The scrolling is very poor.
I've done a fair bit of Googling on this without much success, Any help or suggested reading on any of this would be very much appreciated.
Cheers, Rich.
Edited by: user10788009 on 15-Feb-2013 05:44 - Spelling

Currently there is no 'solution' for this problem.
A quote from Joe
Joe Huang wrote:
Hi
First you would need to deploy the application in "Release Mode". This requires you to create a Java Keystore and a certificate using the Java keytool, and then you would use it to compile the app. If you have done that, then can you please help explain what these pages are doing, and observed performance?
Unfortunately Galaxy Tab 2 is a bit old - if you have done everything to optimize the app, this could be due to older Android OS. Android OS (especially version 2.x) does not support HTML5/JS well, and performance is much worse than HTML5/JS running on Android 4.x devices. This is more than just HW differences - this is primarily due to the web engine used by the webview.
This is also somewhat a general issue with Android - Chrome is a much faster browser on Android, but unfortunately the webview (which ADF Mobile leverages) is not yet based on Chrome. If and when they switch to Chrome, the JavaScript/HTML5 support would start to rival that of the iOS.
Thanks,
Joe Huang

Phone Listener Issues

Similar Messages

Maybe you are looking for