Phone log & texts are missing.

When I make a call or send a text message it shows up on the appropriate log but by the time the backlight goes out on the screen they are gone.  No where to be found.  No texts at all.  No information in the call log at all.  I don't know if it's the phone or if it's my service.  Never had a problem with service before I swithed to this phone so I figure it's the phone.  Out of options and any help would be greatly appreciated.  Thanks.
Solved!
Go to Solution.

It sounds like your very low on device memory. Check your available memory via options, status. Write this number down. Now remove your battery to reboot your BB leaving it out about 30 to 45 seconds. When it is done rebooting check your available memory once again. You should gain quite a bit of space. Also read in the sticky section on how to optimize your device memory. Lots of good stuff on this board to help with exactly this situation. 

Similar Messages

  • Untranslated OTR texts are missing in BSP when language EN

    Hi!
    We just upgraded our backend system to Unicode and ERP2005. Now we just discovered that our BSP solutions running from the portal does not show any text for people logging on in other languanges than english or norwegian. We have only translated our texts to norwegian and earlier the other portal languages automatically got english texts. After the upgrade they don't get english - just blank. We suppose this is because now we have entered a lot of new languages in the backend system. Are there any customizing we can do to force the OTR system to use english when a text is not translated?
    Regards, Tine

    try the below steps. i had the same problem earlier and it got fixed after going through these steps.
    1) In Transaction 'SOTR_EDIT', check if the texts are in the requiredlanguage. You can display a complete overview by entering the 'SUS' character string in the 'alias' field. Select the 'BBP_SUS_UI' package (Display). You can identify the alias in the language 'German', for example, 'BBP_SUS_UI/NAME'. You can use this alias in Transaction 'SOTR_EDIT' to check whether texts for the desired language are incorrect or are missing.
    (2) Check whether refreshing the OTR temporary storage corrects the error. To do that, call Transaction '/$OTR'.
    (3) If the texts are still not displayed, see Note 797257.
    (4) If existing texts are translated directlyin the customer system (for example, because it is not possible to wait for the next Support Package), refer to Note 484888.
    regards,
    manasa

  • Some layer text are missing

    i downoad free psd for logo website. when i want edit in photoshop. i just see the diaog box say some layer text contain are missing.
    1. why my layer text photoshop missing?
    2. where i can fine layer text to fix it?

    Just substitute the missing font for one of the installed fonts.  Or if you desperately want the text to look like your first saw it, hunt down the font and install it.  There are various sites that help locate a particular font like Myfonts Identifont Whatfontis

  • Finder textes are missing

    Finder menu doesn't show all the text.
    OSX 10.6.8

    The 3th and 4th item are missing: A3 and A3.1
    This is in all finder menu's and is a bit annoying because I don't know where to click on.

  • SAP Query selection texts are missing

    Dear All,
    I have a problem with selection texts when running a query.
    There are two systems: development and test. In the dev system selection texts are displayed correctly but in the test system I got only something like:
    SP$00001
    SP$00002
    SP$00003
    SP$00004
    %LAYOUT
    I also transported the User group, the Infoset and the Query but this did not help.
    Please, advice.
    Thanks in advance and regards

    Just want to add that I searched the web to find solution and the only relevant item I found was:
    http://www.jt77.com/development1/programming-19276.html
    However no solution found

  • If I save a word doc as a PDF, some graphics and text are missing - why?

    I am working on a PC and when I save certain word files as PDFs I am having these issues:
    - Docs saving with no graphics from original word document
    - Text or text boxes in header area / near header not saving in PDF version
    I've never experienced this before on any computer - anyone have thoughts? The documents have non-Western fonts which I can't open on my Mac, so I need to use the PC I am working on to save as PDFs. The fonts themselves seem to be saving fine, it's other components of the docs that are disappearing when saved as PDFs.
    Anyone have any suggestions? Thanks

    I am saving a word document as a PDF - I guess Reader is just the program that opens the PDF... So this is a Microsoft question? I've never had a problem saving a word file as a PDF before...
    As far as the font question, I'm not sure how to answer you... One example is that Unicode supports Devanagari Sangam MN on my MAC, but does not support certain other Nepali fonts (which I am able to download unto a PC, but which my MAC doesn't seem to support). The same is true of a Karen font called KNU which doesn't seem to work on a MAC. It seems that PCs support more Unicode fonts than MACs? I don't really understand how all of this works, but I know some of the fonts I have tried to download on my MAC aren't supported?
    Any thoughts? Thanks!

  • Backed up phone now photos are missing

    backed up my phone becuase it was having a problem that I had been told by Apple to restore as new phone for. Where does my backup save so I can get my pics/contacts/etc from so I don't lose them? Help

    If you backed up the device then restored as new, then the only option is to restore from backup.
    There is no option to selectively restore data from the backup.
    If the iPhone was being used as designed, contacts would be synced with a supported application on the computer (NOT iTunes) or a cloud service.  Also, pictures should be copied off the iPhone and onto the computer on a regular basis.

  • Message Folder contains phone logs

    Hi,
    I also have 8700g V4.5.0.55 (Platform 2.7.0.68).  I've notice that a Message Folder contains not only email but also phone logs (records of missed call, outgoing call, incoming call, etc.) in the same folder.  How do I get rid of this?  My BOLD doesn't have phone logs shows in Message Folder.
    One more thing, is there any way to turn off LED status when it is being charge - like BOLD when you put it in Bedside Mode.  I thought I did it once but can't recall how I did it.
    Thanks.
    Solved!
    Go to Solution.

    Hi darwin. To make sure you don't see any phone call info in your messages, hit send (green button) then hit menu. Go to options and select call logging. Select none and you're good to go. As far as the LED blinking when charging, I'm pretty sure there isn't a way to turn this off on your model. The only thing I can think of would be to turn it face down or put it in a case or something I hope I was of some help!
    BlackBerry® Z10
    Editor
    www.berryreview.com

  • Phone Log Folders

    I am wondering if you can create folders under phone log to seperate missed calls, incoming and outgoing?

    Unfortunately you cannot create folders to separate your call log as you describe.
    Try this workaround thought. Go into Messages, hit the menu button, and choose into View Folder. From you can select the "Phone Call Logs" folder.
    You'll see different call types by the date. However depending on the type of call (Missed, Placed, Received) the icon will be different and you'll see the different statuses to the right of each name/number.
    Hope it helps
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing.

    I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing. I do not use iCloud because I have no wifi at home, limited data available for regularly backing up, and I have a 64GB phone and don't wish to pay to upgrade from the 5GB iCloud storage. Am I doing something wrong? It worked so seamlessly on my loaner phone that I am completely stumped as to why it will not restore those items to my original phone again.

    The iphone is designed to be synced to your computer or cloud service.  Your contacts should be in whatever program/service you have chosen to sync.
    If you have failed to do this, then they are likely gone.

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • Blackberry 8310 Curve randomly deletes text/sms messages and phone logs

    Why does this keep happening to me?
    There are times that my phone goes over a week without it happening and then there are times like today it has happened three times.
    I will have maybe 5 ot 6 text messages in my inbox and maybe 2 or 3 emails and I get a phone call and POOF the text messages and phone logs are gone!
    I have repeatedly lost important text messages and numbers from my call log.
    The tech support excuse for it is that I have too many messages in my inbox which causes it, but 6 sms messages and 3 emails is too much?
    I have tried everything (updating the desktop software, updating all of the settings NOT to delete messages until i delete them, hard booting my phone once a day, etc..) and it still does it.
    This also used to happen with my Blackberry Pearl.
    If I can't get it resolved, I will just switch to the iPhone.  I can deal with the randomly dropped calls, but constantly loosing my call logs and text messages is BEYOND frustrating and Blackberry tech support has been no help!.
    Solved!
    Go to Solution.

    DCmuseum,
    Hi,
    You have low free memory left on your device.
    Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
    I do not know your experience level, so if you know this I'm sorry but please read and let me
    know if this applies.
    Most people close the applications by pressing the escape or red key. This does not close the applications.
    Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
    Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
    you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
    Read the link below and follow each step that Tanzim outlines,
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
    If you follow these steps and keep up with your memory your phone will operate smoothly.
    Please let us know if you need help with any of the steps.
    Thanks
    Message Edited by Bifocals on 09-07-2008 11:58 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I just bought a second iPhone for my business... I used my existing apple account and now all my texts are coming to both phones.. How do I get a secondary apple ID and change it on my business phone?

    I used my existing apple ID when I purchased a second iPhone for my business.. Now all my texts are coming to both phones.. Is there a way to create a new apple account for my business phone and if so.. How do I delete one and add another?

    Yes, you can have two separate Apple IDs, and it's pretty easy to set this up. Go into Settings > iTunes & App Store on your business phone. You should see your current Apple ID. Tap on it, then tap on sign out. You can then create a new Apple ID, using a different email address and password than those associated with the Apple ID on your other phone. Log back in using this new information, and you shouldn't get the texts that come to your other phone.
    Hope this helped!

  • All text tones are available in General-Sounds. Some are missing via Contacts-Edit Contact.

    I have confirmed that this issue is also present in the iPhones in the Apple store as of 28-April-2014.  I told one of the guys in the Apple store about it and he said that the iPhones in the store have a custom version, so I asked him to check his own iPhone.  He did, and the issue is present on his phone, so it's definintely a general IOS7 iPhone issue.
    If you go to General -> Sounds -> Text Tone -> Classic, you can see all the classic text tones.
    If you go to Contacts, select a contact, select Edit -> Text Tone -> select Classic, some are missing.
    I used Choo Choo for one of my contacts while I was on IOS6 and when I switched to a new phone with IOS7 and performed a restore, their text tone changed to Tri-tone.  I tried to change it back and saw it was not availble, so I figured they had taken it out of IOS7.  Then I heard a friend's iPhone 5 on IOS 7 who had Choo Choo set up as their default.  I investigated and saw that more Classic text tones were available via General.
    Is there some logical reason why some text tones are not available for Contacts?

    Do you maybe have your contacts separated into groups? If so, perhaps you have unchecked the group that the missing contact are in.
    In the Contacts app, click the Groups button in the upper left corner. Make sure all groups have a check mark next to them.

  • Database Table where modifications to message long text are stored (log)

    Hi,
    As per manual correction mentioned in SAP note 1144291,
    we have changed the long text for message XC092 by modification of the long text.
    This note 1144291 is a pre-requisite for SAP Note 1310808.
    After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
    Both the messages XC-092 and CURTO1-055 are SAP standard.
    The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
    However, my question is:
    Where do we check the log for document modifcation for a message long text.
    I have found the logs relevant to my modification in table DOKHL and DOKIL.
    But in which table do we get all of the foll. data:
    - Message class
    - Message number
    - Modification name
    - Modification created by
    - Modification done on
    - Last changed by
    - Last changed on
    Kindly help. A <removed by moderator> solution would be really helpful.
    Best Regards,
    Smruthi
    Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

    Hi Smruthi,
    The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
    Best regards,
    Derrick Hurley
    Development Workench

Maybe you are looking for