Phone no longer pairing with Hyundai i20 Bluetooth

Hello 
My Blackberry 9360 used to Pair Automatically with my car's bluetooth when I start up the car, however this is no longer happening and I need to manually pair the phone with the car each time. I have tried deleting the phone from the car's bluetooth and vice versa, and repaird again, however when I turn the car off and start it again, it says pairing failed. 
Please help, as this is becoming frustrating, especially since I cannot Pair the phone whilst driving. This is unsafe. 

Hello 
My Blackberry 9220 used to Pair Automatically with my car's bluetooth when I start up the car, however this is no longer happening and I need to manually pair the phone with the car each time. I have tried deleting the phone from the car's bluetooth and vice versa, and repaird again, however when I turn the car off and start it again, it says pairing failed. 
Please help, as this is becoming frustrating, especially since I cannot Pair the phone whilst driving. This is unsafe. 

Similar Messages

  • My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

    I have a similar problem.  I restored my iPhone 5 to the latest available OS.  After completing the process the phone never restarted.  The phone was fully charged when I restored it but now refuses to charge past the red battery icon.  I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone.  The Apple logo does come on and the software fully loads.  iTunes tells me the phone will restart but never does.  I left it to charge all night but it never appeared to load the battery.  This morning I went to the Grand Central Terminal apple store for help.  A woman at the store plugged the phone in but it never charged.  She absolutely refused to believe that I got my phone in UFD mode and loaded any software on.  I don't think it is a battery issue.  The only solution I was given was to buy a new phone.  Repairing it was out of the question.  At this point the phone is completely useless.  Thanks in advance for the help.

  • I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I have to ask,
    Are you making sure you are in park before attempting the sync?   The car won't allow you to do it in motion, whether or not you're the passenger.

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • I upgraded iPhone 6 to IOs 8.1.3 and I can no longer pair with my 2015 Toyota Highlander.  Upgraded to 8.2 and it still doesn't pair

    I upgraded my iPhone to iOS 8.1.3 and can no longer pair with either the phone in my 2015 Toyota Highlander or my Jawbone earpiece.  Upgraded to iOS 8.2 and still no resolution for the car, but now my Jawbone will finally pair with the iPhone.   Is this a known problem or do I need to get a different phone?

    Hi. You can reset the connecting system on your car to try or make sure if password's verifying is needed to connect.

  • HT4061 What if your phone is not paired with iTunes?!

    What if your iPhone is not paired with iTunes and you're trying to find it!

    I think I lost my iPhone and in order to find the serial number, I should be able to get  it from iTunes but my phone was never paired with it!

  • HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    Lots of people having this problem? Hmm. For what it's worth I haven't seen that problem on my iPad 3
    This is a user to user forum so no one here would have any idea whether there is a real problem and, if so, whether Apple is working on a fix.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • Just updated my iPhone 4S to ISO6 and now the phone will not pair with my car(Lexus ) is this an issue with the car firmware or iOS 6?

    Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?

    Was it pairing before the iOS update?
    If so, delete the pairings in the device and the car, then try again.
    If it was not, the issue is most likely the car.

  • I can no longer get my i phone 4 to pair with my autos hand free. the blue tooth on the phone is on and so is the sinc. thanks, cliff

    i can no longer get my i phone to pair with my autos hands free. the blue tooth indicates it is on on my phone and the sinc is also on but neither auto can find a blue tooth device. any help will be appreciated. cliff

    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
    http://www.mozilla.com/en-US/firefox/all-older.html

  • After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

    Since the ios 5 update--bluetooth longer funcioning on ipod touch.  iPad no longer syncing with keynote remote app on ipod touch.  My iPad no longer sees the iPod touch.  The Bluetooth indicator does not come on or flash on the ipod touch.
    any help or suggestions?

    alex.g wrote:
    I've got a fix, even for  those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
    First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
    Here is how I got it back without hotspot.
    1. Launch keynote on one device and the remote on the other as you normall would.
    2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
    3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
    4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
    Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
    Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
    This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine.  However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
    Apple really needs to fix this.  They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say.  They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices.  It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

  • My iphone will no longer pair with my blue ant st3 bluetooth

    We just upgraded an ipone 3 to an iphone5 and it will not pair with our blueant st3 bluetooth. My iphone4 is paired with my other blueant st3 and works fine. If I go into settings on my iphone4 and selett bluetooth it tells me the device is not compatiable and asks if i want to forget the device, after I reboot the iphone4, all is well. My iphone4 is running V6.0.1 and the iphone5 is running V6.1. Any suggestions?

    Mark your above reply as Solved so that others searching for this issue will find the Solution.
    Cheers.

  • Why is my Bluetooth no longer pairing with my iPhone 5?

    Why is my bt not pairing with my iPhone 5? I've tried everything,but nothing works.

    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

  • How come my iphone 5 with 6.1.4 no longer pairs with Uconnect on my brand new 2013 car?

    Three months ago I puchased a new car with Uconnect.  The dealership paired the phone but now it no longer pairs.  I called apple support and also Uconnect.  Both feel that there might be a version problem with 6.1.4.  My guess is that I probably updated the apple software and that is probably when it stopped pairing with Uconnect.  The phone does work with other devices I pair with.  I am certainly not very happy that I cannot use my older apple iphone 5 in this new car any longer.  Can anyone help me?  I feel like I am caught inbetween apple and the dealership with no solution in sight.
    Thanks
    Sky

    Hi Mario, thanks for your reply.  I have upgraded my Iphone 5 to the latest 7.0 software but I still cannot connect to Uconnect on my 2013 Dodge.
    Again my Iphone worked when I first purchased the car but no longer will connect.  At least after installing the 7.0 version on my iphone, Unconnect did ask me for the name of my phone and to say a pairing number but right after it asked me for the number the pairing failed.  It did not provide a paring number to me like when I first paired the phone.  Is it possible that it wants to know the orginial pairing number that I used for my Iphone?  I justed used four zeros since I don't remember the numbers I first used.  By way I had deleted my iphone before doing this so I don't think the pairing number is a problem.  I think it is something else.   By the way my Iphone will pair with other blue tooth devices.   Any additional ideas? 
    I guess it is possible that Uconnect is not keeping up with the Iphone versions but I hope is not the case.
    Cheers Loran

  • Iphone 4 no longer pairs with acura tl

    Since I downloaded the new 4.3 firmward I can no longer pair my iphone with my 06 acura tl.  It stays in discovery mode till it times out. Is there a work around for this?

    Unpair the car from the iPhone (Settings -> General -> Bluetooth) and unpair the iPhone from the car (check your owner's manual).
    Typically you just have to unpair and re-pair the iPhone with the car and you're back up and running.
    http://support.apple.com/kb/HT1664 might help too.

  • Pairing with Think Outside Bluetooth Keyboard XTBT01

    Please help me to pair my Think Outside Bluetooth Keyboard XTBT01 with my BB8900. The BB did see the keyboard but when I enter the numerical password I just get the message that it was not possible to pair.
    What do I need to do that the two will pair?????
    Ferdinand

    I get exactly the same behavior (Style/9670) -- the Style is happy but the keyboard isn't (blinks as though pairing is incomplete). Maybe I should have picked a Windows Phone or Nokia...

Maybe you are looking for

  • Remove custom captions from cache, CS5

    I created a number of custom captions in CS5.  The captions work fine but are no longer needed.  I removed their .bmp and .fcm files from the Gallery\Captions folder but the captions still appear in the Caption Type drop-down list.  I can't seem to g

  • Disabled iPad - WiFi Only - MDM Unlock Possible?

    We have about 100 WiFi only iPads controlled an MDM. If a use forgets their unlock pin on campus (while they are connected to our WiFI) we can use our MDM to remotely unlock the iPad. However, if the user locks themselves out at home and then brings

  • Idoc error meesage contains empty quotes ' '

    Hello All, We are generating Picking confirmation to customer delivery Idoc using E1VPDLH segment and extended this segment to include Vendor/Creditor For triggering a workflow for an error message, I entered a non existing Vendor through WE19. I exp

  • Configuring PPPoE on 2801 with WIC-1ADSl

    Hello All! I try to configure 2801 with WIC-1ADSl part of my config is: interface ATM0/1/0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/55 encapsulation aal5mux ppp dialer pppoe-client dial-pool-number 1 interface Dialer1 ip addr

  • SELECT * FROM r WHERE r.DateAdded ='1/8/2015 12:00:00 AM' AND r.DateAdded ='1/8/2015 11:59:59 PM'

    anyone can help how to run query like that.. thank you!