Phone not working after 8.1.1 update in iPhone 5

Did 8.1.1 update (stupid 1.2 GB) and now phone not working. It give a funny number on My Number

To add further info: iPhone 5s and using CDMA mobile service. I either get no sim card or no service.

Similar Messages

  • Imessage feature not working after 5.1 software update on iphone

    After the latest software update (5.1), text messages that were once blue (indicating imessage) went back to the green color.  What gives?

    Try doing a reset on your network settings.  I found the solution at TekShot5 - iMessage fix

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • Phone not working after 8.1 download cannot unlockit

    phone not working after 8.1 download, cannot get into menu

    To add further info: iPhone 5s and using CDMA mobile service. I either get no sim card or no service.

  • Illustrator tools dropdown is not working after the recent software update

    My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

    Same problem here.  I have a Mac with a recent Yosemite update.

  • Home button not working after 5.0.1 update

    Ok now the home button not working after 5.0.1 update.  Anyone have any ideas?  How do I roll backfrom this update?

    This happened to me as well.  AT&T had me reset my network settings and this fixed the problem.  Here is how...
    Settings > General > Reset > Reset Network Settings
    "For now" the problem is fixed for me.

  • TS1398 My wi-fi does not work properly now I have updated my iPhone 4 can any one help

    My wifi does not work properly now I have updated my iPhone 4 to the iOS 6 operating system can someone please help me? Also on my maps I can not zoom in as image is so distorted

    Make sure your ring/silent switch on the side of the phone is not On (red dot showing).

  • Phone not working after update volume. Battery life resets on own

    Ever since last ISO update phone not working right. Looses volume. Shuts off   Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update.
    Very sad customer

    Hello 2canoes and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're experiencing issues with your device after updating your software.
    It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Touch ID not working after IOS 7.1 update

    Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

    I'm like, Touch ID almost dead, we're going apple fixex this.
    Seems it only is affecting the white model

  • My iPad orientation is not working after the IOS 8 update.  Please fix this bug!

    my iPad air orientation is not working after the IOS8 update.  Can you fix this bug? Thx

    Did you try a reset?
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • Drobo not working after 10.5.8 update

    My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

    'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
    This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
    From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
    I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
    Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
    The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
    As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
    Oh, and Data redundancy on a raid is not a backup of course.
    Vincent
    Message was edited by: v1ncen7

  • External monitor Syncmaster 2494SW not working after 10.6.7 update

    External monitor Samsung Syncmaster 2494  SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
    Safemode boot, SMC reset, PRAM reset did not help.
    Exactly the same setup works perfectly under 10.6.6.

    HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

  • IPod touch not working after 5.0.1iOS update

    It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • Trackpad not working after 10.8.4 update

    Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

    Apple store genius bar appointment is the best option for a positive resolution.
    Ciao.

  • Phone not working after update crash. E72

    while updating new software  ...update was crased at the end due to cabel disconnection. now phone is not working. what to do?

    You may try do "hard reset".
    Press and Hold "*" + "3" + "call button" while you power on the phone
    Regards,
    Anandharaj
    www.raj2u.net :: E72-1 | RM-530 | 023.007

Maybe you are looking for