Phone number appearing in Favorites list but does not exist in Contacts

I have an iPhone 4S, running iOS 5.1.1 (9B206).
About two weeks ago (not really sure when I noticed) a phone number appeared at the bottom of my Favorites list. The number is for a person that I deleted from Contacts some months ago. The number is not in the Contact list anywhere, the contact does not exist. I've tried recreating the contact (and Favorites then shows the name) and then deleting the contact, and its still there in the Favorites list.
There is a facetime icon next to the number. If I turn off Facetime, the number disappears.
Any ideas welcome.

Go under your phone icon, then under the favorites tab. Look in the top left hand corner of the screen and there should be an edit button. Tap it, and then tap the red delete/minus icon to delete it from your favorites list.

Similar Messages

Service entry sheet Number shown in PO history but does not exist

Dear Experts,
we use ZML81N : for creation of SES
& use ML81N : For Acceptance ( Release ) of SES
while creating PO , under services tab for a line item , the service has been entered for total Quantity 12 & units as "months"
User tried to create one service entry sheet against the line item with Quantity = 1 & unit = month , but it seems this SES got saved somehow without any line items inside it .
if we we try to open this SES with number shown in PO history , system says SES "Does not Exist"
In the PO history against the PO item in Item Details-PO history tab , one Service entry sheet is showing with "SEnt" in the
short text , but there is no row in PO history for the above with short text as "GRSR" , which also should have been created
automatically by the system . In the column "Amount in LC" , amount for the service is showing .
When a new SES for the same line item is attempted to be created , the system is showing available balance Quantity as "11" ,
that means system is considering the "1" quantity entered in the first SES as consumed .
Please advise how we can delete the first SES which we are not able to see , free-up the budget consumed by this SES &
restore the Balance Quantity shown in the new SES as again "12" as if no SES has been done against the PO line item.
I have tried to search the forum , but could not find solution.
Your Response will be deeply appreciated.
Thanks in Advance .
Regards,
Anil Shanbhag

Dear Sir,
Thanks a lot for your reply.
After checking it is found that there is no data in the tables ESLL, ESLH, etc. stored for the mentioned entry sheet, so SAP can not try to reconstruct the entry sheet based on that data.
Can you please tell from which tables the wrong FI and CO postings (e.g., the referring accounts) must be cleared manually in order to solve the problem ? as we could not find the value of "LC amount mentioned against the Service entry sheet in PO history" in both the tables ESLL & ESLH.
warm Regards,
Anil Shanbhag

A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

Did you tap "Show older backups" on the Choose Backup screen (see image below)?

Installed Photoshop Elements 13. Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. How do I validate. Checked account but product n

How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. Checked account but product not listed. Installed with serial number that was sent by Adobe. Have attempted numerous times at different times of the day. On-line connection working.

Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob

Is there a mobile phone that can sync with ical, but does not require a data plan?

Is there a mobile phone that can sync with ical, but does not require a data plan?

Thanks for the reply. I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites. I was hoping there was an easier way.
John Maisey wrote:
Hi,
You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
Best wishes
John M

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

I purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

Yes, I have a TLP license, so which kind of upgrade should I buy?
I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate!

Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

Re Outlook for Mac - can anyone confirm that this will acheive my aims to have emails and associated folders within email to synch across all devices and that calender will also sycn across all devices using iCloud ?

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

Variable is used in description text Task description, but does not exist

Hi,
I am getting following error in the standard task 207914 ERMS_DECSN.
Workflow Error
Variable &REQREQ.REQUISITIONERUSER.ITSDESTINATIONSY& exists in description text Task description, but not in the container
Message no. 5W146
Diagnosis
Variable is used in description text Task description, but does not exist in the container.
System Response
The task could cause workflow errors.
Procedure
Correct description text Task description or add the variable to the container.
Can anybody please guide step by step process to correct this error.
Regards,
Deepak

Hi Deepak,
I face a similar issue,Task description contains an element which is available in container, but during Check, it throws below error.
Variable &ZINFO.REASON& exists in description text Task description, but not in the container
but variable "&ZINFO.REASON&" is not accessed in Task description.
suggest any ways to check the binding or adjust binding between workflow/task.
Please provide a solution to fix this error or advice if this error can be ignored?

Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
James

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

IOS 6 updated on my 3GS phone. The maps works well but does not give spoken turn by turn directions. Any ideas on how to make this work?

Installed iOS6 on my 3GS phone. The maps app works well, but does not give spoken turn by turn directions.
Any ideas on how to fix this?

Go to http://www.apple.com/ios/maps/ and look at the bottom: Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
You can always use the WAZE app like I do.

Adding to a task list - User does not exist or is not unique

We have SharePoint 2010 with a single web server front end and another server as the SQL server. When trying to add a task to a list or an announcement to a page, users are getting the error, "The user does not exist or is not unique."
I have searched diligently for an answer, but cannot find anything about this with regards to users getting the error.
Thank you in advance for your assistance.

hello,
i have faced your problem few minutes ago. when i was trying to solve another problem
--->> (Object Cache: The super user account utilized by the cache is not configured) --> my current problem
i have found at search results the below PS command to configure super user and super reader.
$w = Get-SPWebApplication http://webapplicationlink
$w.Properties["portalsuperuseraccount"] = "domain account"
$w.Properties["portalsuperreaderaccount"] = "domain account"
$w.Update()
but it caused me another problem which you are facing right now.
---> ( Error: The user does not exist or is not unique)
while adding any item to any list specially lists
then i have tried to rollback by doing the below PS command and it worked and solved it.
$w = Get-SPWebApplication http://webapplicationlink
$w.Properties["portalsuperuseraccount"] = ""
$w.Properties["portalsuperreaderaccount"] = ""
$w.Update()
after that check for the super user and super reader by
Get-SPWebApplication | %{Write-Host "Web Application: " $_.url "`nSuper user: " $_.properties["portalsuperuseraccount"] "`nSuper reader: " $_.properties["portalsuperreaderaccount"] "`n"}
This is the output for the above command should be like this.
Web Application: http://webapplicationlink
Super user:
Super reader:
hope that it helps :)
Karim El Zarka,Senior IT Specialist Commercial International Bank, MCTS Sharepoint

Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

Phone number appearing in Favorites list but does not exist in Contacts

Similar Messages

Maybe you are looking for