Phone number is not working in europe, how can i order?

hello,
i have a problem in iphoto to order a new picturebook, when i need to fill the form, we can not get any further with our phone number.
if we put our phone number in, it does not except it, i have tried different ways, but we do'nt get any further.
can somebody help us out of this missery?
i only have our mac for three months, we are still new to this kind of problems
thank you

iPhoto for iOS does not support photo books. You have posted in the iPhoto for iOS forum. Perhaps if you post in the iPhoto iLife forum you will get some help.

Similar Messages

  • Phone number is not working in europe how to order?

    Hello,
    i only have my imac for a few months, i am new to all of this.
    i have made a photobook in iphoto, when i needed to fill in the form, i can not enter our phone number correctly, i have tried severall ways to enter the number, but it does not work.
    can somebody help me out with this?
    is there a solution, or did somebody have had the same problem?
    thanks
    lorenzo

    Several people have gotten around teh problem by leaving the + off and others by moving digits around - the US phone format is 10 digits all numeric aaa-ppp-nnnn - try fitting your digits into that format
    and see this thread
    LN

  • I am not getting all my txt messages when I look at settings- messages- send and receive my phone number is not checked... how can I change it?

    I am not receiving all my txt messages, I think it is because in Setting -> messages -> send and receive, my cell phone number doesnt have a check next to hit. Im not able to check it. any ideas?

    Old phone is off and number is fully ported?  SIM card new and installed/seated properly?  All Apple credentials disabled if coming from iPhone?

  • Why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

    why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

    I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

    Thank you for your time Woody. Recently the Mac seems to freeze a lot, seemingly due to a problem with the airport, especially if the computer is inactive for anything more than a few minutes. Then yesterday I suddenly couldn't send or receive messages so I got in touch with my server and they reconfigured the mail account. I can now receive messages but can't send them, always getting a timed out message when I try to send an email. I phoned the server again and they said it must be a problem with Mail as we tried sending a message online from the server's webpage and it worked fine, so they suggested I reinstall Mail. So hence my original question. Sorry for the rambling! I'm not very computer minded.

  • I  have been having nothing but trouble with OS 10.6.8.  Many of my appliatins will not work..  HOw can I revert back to a previous version of OS x?

    I  have been having nothing but trouble with OS 10.6.8.  Many of my applications will not work..  HOw can I revert back to a previous version of OS x?

    Before you revert anything try this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Next time don't post something like "nothing but trouble." Tell us exactly what the trouble is and provide any additional information such as error messages.

  • Pages: I want to reorganize items in folders, drag and drop is not working. So how can I do this?

    Pages: I want to reorganize items in folders, drag and drop is not working. So how can I do this?

    This is the very top of the documents view in the Pages app. If you don't see this, swipe down in this window to reveal the Date and Name tabs like you see here. If you tap on - Name - that arranges all of the documents in alphabetical order in this view and it also arranges documents in the respective folders alphabetically. If you tap on - Date - that will arrange all documents by the date that they were created or last edited. You want to make sure that you keep Name as the default at the top.
    Trust me, this does work. If you name the chapters alphabetically .... Chapter 1, Chapter 2, Chapter 3, or if you simply name them A, B, C, D, etc. they will be arranged in that order using the Name button at the top, which uses alphabetical order to arrange the documents.

  • Help! my skype phone number is not working after b...

    I have a skype number that i recently reactivated. The number is still not working. It gives callers to my number one ring, then a busy signal. What seems to be the problem? i paid for a year of service. Not a 'happy camper' right now!!!
    Please advise!
    EDIT : title/message case changed.

    Hi,
    You need to refresh your privacy settings.
    See: https://support.skype.com/en/faq/FA10615
    If my answer helped to fix your issue, mark it as a Solution to help others.
    Thank You!
    Please send private messages only upon request.

  • Dialing phone number does not work

    It is possible to call a person/number stored in the contact list. But by inserting a new phone number into the number field and activating the green dial button, the phone number has got erased and nothing happened!-????
    Thank you very much for your help!

    Let me understand this, you added a new number to a contact, but did you tap on DONE on the top left side ?
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I've been charged for a service which did not work properly. How can I get reimbursed?

    I have downloaded a new apps "old faces..magic". The first time I used it it was working well. But yesterday I tried 5 times could not get the final results but I was still charged on my several trial (5x CHF 2.-). How can I get reimbursed?

    Could have been a number accessed from a sky box or free view box. Pressing the red button can instigated a charged call. Do that a few times on xfactor or strictly and the cost soon builds up.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Video tag is not working in firefox how can we remove this error

    Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

    Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
    Do they work here?
    *Firefox Videos: http://www.mozilla.com/firefox/video/
    See also:
    * https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

  • Installed "NEW" Flashplayer 11 SIX times...still does not work...HOW can I get this to work???

    First...I am NOT a developer...Just a "regular" user who is now fed up that once again, a new Adobe product has been released with bugs, so now I can no longer see whast I need to on my laptop. 
    Here's what I do know:
    IE 9
    Windows 7 - Home Version
    64 bit platform
    Tried to install your latest version of Flash Player six times...all of these times I received a confirmation that it was successfully completed.  NONE of those time did it work (tried YouTube, and your own site...nada).  I used the troubleshooting tips for Windows 7 and IE9...did not work.  And now I can't find a way to reinstall the old program that at least worked!  I need to be able to use this functionality to work today...what do I do?????

    Hello!
    I own a small company and we are having the same problems.
    IE9 is not working with the latest flash update infact the update has messed up flash complety for all sites once installed.  I went to YouTube eariler and it warned that I needed to install to the new Flash Player upon instaling and returning to YouTube it had the same message. This led us to download both the x86 and x64 versions and useing the uninstaller went through each one and tried the updates. None of the downloadable updates from Adobes site works. I have also loaded up Windows XP in a virtual machine and trying IE 8 with the latest updates and it as well does not work and does the same thing upon updateing it just keeps saying to install the latest update allthough it has allready been done!
    Now on the other hand I loaded FireFox and it had the same update and upon restarting the browser after applying the update and it works just fine!
    Im on a Windows 7 x64 Ultimate box and ran the WindowsXP in the VM. FireFox was loaded on the main OS and worked fine after said update.
    Of Course I have allready double checked the running addons in IE 9 and the files within the /system32/ and all the flash files go there (x86 and x64 were differnt named files)
    Im guessing there is something conflicting betwen IE (IE 8 and 9 tested)
    Now this is not just happining on this machine but all of our desktops and laptops no one has any trouble with FireFox working
    Also this will break all flash objects in IE even localy as now no flash works it acts like it is not installed.
    Guess will see how long this takes to get fixed or aknowledged...  lol

  • How can I downgrade an operating system our bluetooth worked ok on the 4.2.1 system but now we are on the latest system it does not work properly so how can we get the old system back

    how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley

    thankyou but it looks like we won't be buying another iphone

  • Some of my programs are not working on Yosemite, how can I get mavericks back?

    Hello,
    I have upgraded to Yosemite, however some of my programs will not work. Is there any way that I can go back to the older Mac Os x?
    -J

    I would suggest you to post the query on Apple forums.
    You may also refer
    How can I uninstall OS X Yosemite and return to... | Apple Support Communities
    Is there any error message while you are trying to use Adobe products?

  • I accidentally moved my iphoto library to Macintosh HD in Finder, now it's not working anymore. How can I fix this?

    Hello everyone,
    I hope someone can help me.
    I wanna copy my pictures to an external hard drive. Therefore I was trying to format my Seagate 1TB external drive (so it works with the Mac), but my Disk utilities is not working as it should (don't know why). I can't open it. If I try "Show packet contents", I do see that it has some kind of content, but I don't know what to do with the content haha. So I was trying different things. Accidentally I moved my iPhoto library to Macintosh HD in Finder (instead of my external drive). Now I have 2 problems: I can't open my iPhoto anymore (can't excess the pictures) and my external hard drive is still not formatted (so I can use it for my MacBook Air 2010)... Who knows whats the best I can do, is there a way to fix this?
    Thanks in advance,
    Hanneke

    Solved! I transferred iPhoto library to Trash and just transferred them back to Pictures in Finder. The problem with my external HDD: I just restarted the Mac and suddenly Disk Utilities did work. I don't know what happened, but it works again; me happy

Maybe you are looking for

  • Any way to get the value of attribute in method call

    Hi I am using ADF 11.1.1.3 and dynamic tab shell. I am trying to download file form my page fragment. *<af:commandLink text="#{row.bindings.element.inputValue.FileName}"* id="viewFileInfo" *actionListener="#{backingBeanScope.backing_fragments_auditCh

  • Is there a way to tell the dir location of a class?

    Good day. I have a desktop application and I want it to save information to files located in the directory where the class is started. example... c:\myStuff\java java -jar myJar.jarThe program starts but is there a way within the program to tell wher

  • Installed camera raw, but still nef files on bridge and not opening on cs6

    installed camera raw, but still new files on bridge and not opening on cs6

  • Adapter execution error OIM

    Hi All, I have created a new field in user form named telephone number,When ever I run AD target recon, the updated telephone number in AD is reflecting in Process form. I wrote a copy Adapter that copies process form value to usr form. This is worki

  • Windows 8 problem with brand new Envy 23

    At what I thought was the end of PC "setup" a message appeared in small font size saying Windows 8 was not installed and instructed me to go through the setup again, which I did not do.  Windows 8 is supposed to be standard on the Envy 23 and I expec