Phone Number= Problem with texts, data etc?

Does anyone know if a phone number is a reason for slow data, text messages etc? Are there any phone issues that can be a result of having a "bad" phone number?
When I had the iPhone 5, my pic messages were not sending and I was having severe data issues. The replaced the phone twice and the SIM card and I ended up taking the phone back and switching back to my S4 before I got the 5s opening day. What does switching out a SIM card do? Does the SIM card have anything to do with how a phone is receiving data/network signals?

My friend was telling me she knew someone who had to change their number because their texts and MMS messaging were being funny and not sending/recieving O_O. Well they switched out the SIM when I previously had the iPhone 5 but this time they didn't do anything, now that you mention it, I think I might just go there after work to have a new SIM inputted because now I'm on 3G 90% of the time instead of LTE and the LTE switch is on. All they did (technician online) recommended a network extender -_- hello that doesn't help me when i'm away from home. smh.

Similar Messages

Problem with Text data Extraction from R/3

Hi Experts,
The problem is extracting Text data from R/3 system.
Actually its an delta load.The load is running fine....but it is not bringing any data from the source system (R/3)0 Record.When I checked the table in R/3 system the data are there.
I tried with Fullupdate too, still its bring 0 record.
What will be the solution for this?
Thanks in Advance!
Regds,
SPS

Hello SPS, I cant remember very well, but when we found this issue, the problem was Language key. There was a problem with standard datasource.
Did you try to find any notes for your datasource ?
Hugs,
Bueno

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Can't "prepend" a phone number from a text, document or website?

When the Pre recognizes a phone number in a text message, e-mail, document or website, it allows you to click on the number to call it. Great so far. Unfortunately, once you do so, and completely arbitrarily, the phone won't let you make any edits of any kind to the phone number except to add or delete from the end of the number. Every phone I've ever had has allowed me to "prepend" a number (to, for example, add an area code). More to the point, there is simply no good reason for the Pre to prevent me from making whatever edits I want to the number. I should be fully able to hold down the orange key and move the cursor anywhere that I want within the number and then make edits, just like I can when I enter a number manually. Unfortunately, for no apparent good reason, the phone allows no edits of any sort to any number I've clicked on from another source.
Can anybody suggest a workaround, or do is this just one of those bizarre "what were they thinking" type things I have to live with?
Post relates to: Pre p100eww (Sprint)

Yeah, and I can also copy and paste the number instead of just clicking on it, but both solutions completely and entirely defeat the whole purpose and convenience of being able to simply click on a number in another source to dial it. I don't want to have to add numbers I'm going to be calling only once to contacts just to make small changes before I dial them, and then have to delete them from contacts when I'm done. There is a reason that users can simply click on phone numbers in documents and texts to dial them, and that is convenience. Not being able to make simple edits kills off some of that convenience. Workarounds like adding to contacts or cutting and pasting kill almost all of it.

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Is anyone else having problems with Apertures Date fields?

After experiencing a sysems failure I began restoring my images from backups. I have had no end of problems with Image dates. I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
Here is a clip from my image metadata using exiftool:
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
File Access Date/Time           : 2013:01:16 11:34:38-05:00
File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
Modify Date                          : 2006:02:20 11:51:12.10
And here is what Aperture utilized on import
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
According to the Aperture mapping table, this shouldn't be happening.
Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about slightly over 30,000 images. Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image. That approach isn't acceptable.

Hmm ok, let me restate the issue then, I thought I was clear. I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
(The delta of 5 hours is the result of Zulu versus local time offset)
But, when I ingested it into Aperture, the import routine utilized the IPTC field
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.). This resulted in the image date fields being stamped in Aperture as:
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

I changed out my old cell phone for a Motorola zoom and now the zoom has my old phone number associated with it's sim card. I just purchased a Samsung Android cell phone and would like to trade the sim from my new to cell to the zoom so I can have my old

I changed out my old cell phone for a Motorola zoom and now the zoom has my old phone number associated with it's sim card. I just purchased a Samsung Android cell phone and would like to trade the sim from my new to cell to the zoom so I can have my old cell phone number back. The problem is the sim cards are different sizes. Is this something I can take to a store and get switched out?

SRCLARK,
Great question! You can go to the store and get a replacement SIM card at the store. Any corporate store will be more than happy to help replacing your card. http://bit.ly/3SdsA
RobinD_VZW
Follow us on twitter @VZWSupport

How do you change the phone number associated with apple id

I bought my wife an IPad 2 and when setting it up it said I could change the phone number later in settings. Now when I get a text-- she gets a copy on her IPad. I can't see where in settings to change this to her phone number.

The phone number associated with an Apple ID is changed here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Click on manage my Apple ID and sign in. Then go to your profile and make the necessary changes.
But your question is a little confusing. Controlling which device receives texts and Messages is done in Setstings
Settings > Messages > Send and Receive from
Make the necessary changes there.

I have a new ipad min2. I have the verizon activated. but cannot find phone number. I checked view account. How do I get my phone number asscoiated with my Ipad?

I have a new ipad min2. I have the verizon activated. but cannot find phone number. I checked view account. How do I get my phone number associated with my Ipad?

Your ipad has a cellular access number in settings under cellular data.
it is not a phone, and that number can't be used to phone calls.

Solved: InDesign CC: Problems with text in text box: text flows around invisible object

I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
Solution:
There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

Arthur, Garry
Would be great if you could send the files as attachment in an email to [email protected]
Else, you may post here using these steps: http://forums.adobe.com/message/3994281
Thanks!
- Neeraj

ID CS5: Problem with Text Wrap being Forgetful :(

I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
Ignore Text Wrap IS NOT selected.
The text box IS below the images.
The copy is flowed throughout the document.
Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
"Wrap around bounding box" IS showing as selected for the image/images.
There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
The images / text box order is not changed between being correct and being incorrect.
Anyone else with this trouble? And, if so, how did you fix it? Thanks,
A. Henson
InDesign 7.0.3
iMac i7
8GB RAM
OS X 10.6.6

@henson26,
I emailed you offline to see if you can provide me with an example file that shows the problem.
Matthew

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

How do i change the phone number associated with my ipad

my ipad's facebook is using my wife's iphone number despite that number not being used with apple id. i want my ipad to use the phone number associated with my apple id.

Hello davidsquestions,
The article linked below details the process involved in linking and unlinking phone numbers with your Apple ID for use with FaceTime.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Allen

How do i change the phone number associated with my apple ID?

how do i change the phone number associated with my apple id and attach it to my ipad?

Tap "Manage your Apple ID"
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

How do I change the phone number associated with my Bonjour account?

How do I change the phone number associated with my Bonjour account?

Do you not set the phone number within Apple ID
https://appleid.apple.com
and not iCloud?
May be wrong here:(

Phone Number= Problem with texts, data etc?

Similar Messages

Maybe you are looking for