Phone only unfreezes when using siri

out of nowhere I went to open my lock screen and it froze , I thought it was just one of those regular three second freezings but after awhile it wouldn't unfreeze. The only time it would unfreeze would be when I would use Siri and ask her to open an app , that's the only time I can type, swipe , move on my phone like a normal phone . It won't let me move the pages on the home screen or the lock . Help please!!

Siri requires data access, at least from what I have read and understand about it.
Since it requires data access, if you are only in an area with EDGE connectivity, voice and data cannot work simultaneously.

Similar Messages

  • Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

    After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker.  What to do?

    Hi jlk166,
    I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/kb/ts5196
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Having a connectivity issue with bluetooth in car only when using siri

    Does anyone know of a fix for connectivity issues when using siri to dial a number when using bluetooth in a car? If the number is inputted manually then the call goes through. When asking siri to make the call, it starts to go through but then quickly disconnects. I noticed the problem soon after downloading IOS 8.

    Apple has no fix for this.  I have been in contact with Apple customer service, engineering, etc. for over 2 months now.  Very disappointing, as it worked fine prior to iOS 8.0.

  • HT4623 Anyone have trouble with iPhone 5c when using Siri?

    Anyone having with iPhone 5c when using Siri?

    I have a problem when I am using the SIRI and have # contacto, for example mark with siri #995012607.

  • HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display.  I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
    Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities.  It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
    Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

  • SSL error black screen when using siri random volume when master is set on high iphone 5

    my phone keeps saying SSL error and wont work on wifi or on the network i also cant send picture messages i really cant do any thing on the phone and the master vol is set on high and it randomly picks what ever leavl to go off on some times its loud and some times it dont ring at all i have also noticed that when i use siri my screen goes black i have resotred my phone using itunes and i have also exchanged my iphone5 for a different iphone 5 and am having the same problems any tips

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If you make an appointment with an Apple store for a consultation this is the first thing they will tell you to do. Hopefully it gets your phone working correctly again.

  • Problem when using Siri.

    I got my iPhone 4S yesterday. Sometimes when I use Siri, when the phone is locked, the screen goes blank and Siri can't understand the word 'boo'. My boyfriend's contact name is Boo Boo, when I say 'text boo boo' she doesn't understand. Is anyone experiencing these problems?

    Siri is a beta product and as such will have issues.
    Seems a simple enough fix would be to update the contact info with your boyfriends actual name.

  • How can I change the default number for a contact when using Siri

    My husband has one mobile for work, one for home, both are in my favorites. When i'd ask Siri to dial his number, it would always ask me which one to use. Recently when calling him Siri asked if I would like to use his work number as the default and I mistakenly agreed. Now Siri never asks which number to dial and always dials the work number. How can I change that? I would like to make the default the home number.

    Thanks all for your responses.
    I tried to "order" Siri to change my husband's default number and whatever syntax I used for my request Siri responded with a web search on how to set favorites.
    So I ended up deleting the work number from my husband's contact information and I used Siri to call him a couple of times. After 24 hours (random time frame) I added his work mobile back to his contact information, but not in the favorites.
    SIri now dials his home number because it's the only one in the favorites.
    I'll add it to the favorites in due course.

  • I have an i phone 4 and when using i message sometimes a grey bubble appears in the left corner... Does it mean the person is replying to me or just sending a message to anyone...

    I have an i phone 4 and sometimes when using imessage a small grey bubble appears in the left hand corner does it mean the person is replying to me or to anyone..

    It means that person is typing a response to YOU.

  • How do I have my phone Make sound when using "Find my phone" app

    How do I have my iPhone make sound when using "find my. Phon" app?

    You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

  • HT1349 why my i phone heats up when using or downloading applications

    why my i phone 5 heats hup when using internet or downloading application

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset  >  http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring >  http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first..

  • When using siri my location service turns off ?

    when i use siri the location service turns off ?...when i turn it on and go back to siri it (location service) shuts off again ??! what causes this and how do i fix it ?

    Hi,
    If a Restart and a Reset have not Resolved the issue, then the next step is a Restore...
    See here for
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Cheers,

  • When using Siri, screen shut down

    While i'm using Siri on my iPhone 5 running iOS 6.0.2, sometimes the screen shuts down and then it returns back.
    while the screen is off using Siri, it listens to me perfectly but the screen its off and you can see nothing.
    it's an iPhone 5 software problem :S and i've noticed that this problem also happens on iPhone 5 running iOS 6.0.1

    If you are a developer using beta software, you should be posting in the Developer Forums to which you have access. Discussions of beta software are not permitted in the regular forums.
    Best of luck.

  • Unable to increase volumn using side button , only  decrease when using phone

    my volumne button is not working, unable to increase volumne

        SammyInOH,
    Hmmmm. This is definitely an odd occurrence because you should be able to control the ringtone volume via the side of the device. Now, I appreciate you trying a soft reset, so let's take it a step further. Next, given that this functionality should still work, I'd recommend trying safe mode http://vz.to/yAHjEJ to disable third party apps and allow you to isolate issues between software and potentially threatening apps (which you should remove if you can control volume again). Please let us know how that goes.
    Evan_VZW
    Please follow us on twitter @VZWSupport

  • Video Phone only works when specific user initiates connection

    Hi,
    I have an application based on the Cirrus Video phone demo as presented here:
    http://labs.adobe.com/technologies/cirrus/samples/
    In general, this works fine, but for one specific user with whom I test, I have the following issue:
    When I initate the call, we are paired together by Cirrus, but his video/audio does not transmit to me. He can however see and hear me just fine.
    When he initaites the call, everything works fine.
    I'm concerned that this is an issue re. NAT/Firewall setup on standard home broadband connections, in that UDP is allowed through his firewall when the firewall sees that the connection has been initiated by him.
    I'm a web developer, rather than a Flash developer, and I'm just looking for a few leads so that I can investigate this.
    G

    My application works as follows:
    User1 (me) askes User2 (friend) if they would like to speak via AJAX text chat system
    When User2 confirms that they would like to do this:
    User1 browser loads Flash app
    Flash app connects and obtains session key from cirrus
    Flash app writes that session key to database
    User2 browser loads Flash app
    Flash app checks DB to see if session key exists
    If not, it waits, and check again in 10 secs
    When session key is finally found, Flash app connects to cirrus
    Cirrus now exchanges network data between clients, and P2P connection is established
    Call is placed from User2 to User1
    User1 answers
    Video and audio transmission starts from User1, and is received by User2
    No Video and audio transmission is received by User1 from User2 (text chat over Cirrus is however possible)
    All of this works in the majority of cases with other users, and when the roles are reversed, it also works.
    The only time it doesn't work, it when I try to call my friend.
    The behaviour described above can be seen in both my app, and the sample provided by Adobe at:
    http://labs.adobe.com/technologies/cirrus/samples/
    I hear what you are saying about RTMFP, but it really doesn't look like a coding problem, unless that problem also exists in the Adobe demo.

Maybe you are looking for

  • Cant pass file from a dir to fileinputstream()

    hi ! i am stuck here ..please help. I have an application that creates a dir called temp in home directory . and and a file which is named in following format. for example 080718002220.txt i.e. systemdate.ext type . Since this files are created in re

  • Multiple Animations in a PDF

    I have followed a tutorial on animations in .pdfs made by Right Hemisphere and have got things working.... ...however, the tutorial plays back ALL of the animations in the u3d at once. I have created a u3d file with Deep Creator which has mutiple ani

  • Change existing WebService

    Hi, hope anybody can help. We created a WebService from a function group. In this function group are 14 function modules. Now, we have some changes on export structures and one new function module in the function group. How can we refresh the webserv

  • ADF Jdbc Connection from bc4j.xcfg

    How do you obtain a JdbcConnection from bc4j.xcfg file. I am creating a DBUnit which needs a JdbcConnection object to properly setup datasets? how about if I use this: ApplicationModule module = Configuration.createApplicationModule(); //the applicat

  • I'm missing a DLL file in Leopard

    Hi, im trying to install the IE 8 beta on my new leopard system and it says im missing the DLL file CSSEQCHK.DLL what do i do?