Phone reboots during downloads

Hi.
My Nokia 6630, used as a modem, often suddenly reboots during long downloads.
So the connection is interrupted.
Can anybody say whay this happens, and how to avoid it?
Thanks for any help
Rodolfo

yup. same thing happened to me. I did a factory reset three times. it still didn't help. I really didn't want to do a factory reset because I'd lose all my data from all the game levels and notepads, etc. but at the end, I finally did a factory reset and the problem still occurred. during its reboot, it got stuck frozen at the google sign for about 5-10 minutes, I pulled the battery and tried it again. Again it got stuck at the google sign. i had to do it numerous times until the home screen finally showed up, half an hour later. i got fed up, i believe the phone was defective so I requested for a replacement.

Similar Messages

SPA 525G Phones rebooting during phone calls

Hi,
My office uses a SPA 525G system and recently phones have been randomly rebooting during phone calls, causing the calls to drop. I have seen previous forums on various sites about this being a common problem but still do not have a clear answer on what a good solution might be.
Any help would be greatly appreciated.
Thanks!

Are you using The Bluetooth on SPA525G? I find that this happens when I have BT connected to my iPhone
Sent from Cisco Technical Support iPhone App

Phone reboots during conversation

This isn't the first time this has happened but last night while phoning a friend my iphone rebooted a number of times. There didn't seem to be a time period when this happened and I wasn't moving about, but as you can imagine this is a very annoying thing to happen and a true reason that might see me discontinuing my use of the 3GS.
I see a large amount of other posts on this topic and yes I have left feedback, but I feel another thread needs to be opened on this problem as a free case isn't going to fix this! I did note that I had just about every app open while this was happening so it wasn't a true reboot, but the apple logo came up and I had to wait for the phone to restore before I could use it again. Sounds like a software issue to me!

Have you tried removing the battery and replacing it after one minute - let the phone reboot and see if this helps any?
Nurse-Berry
Follow NurseBerry08 on Twitter

Phone rebooted during call

Got the phone yesterday... Was out for a nice walk this moring talking to my mom on the phone and she went silent - looked down at the phone and the AT&T logo was there - the phone was rebooting. Had been on the phone for maybe 7-8 minutes and it had been up to my ear the whole time, so it wasn't a combination of anything on my part.
Only seen this once so hopeful it's a once off.
Nice phone Nokia - please stick to it and work out the kinks. Giving this phone a shot and I'm a potential long-term customer (have had nokia phones in the past when I lived in Europe)

Hi there,
First please backup your data and perform a soft reset on your phone (press and hold the volume down and power buttons) until the phone reboots and see if that solves your problem. If not, then perform a hard reset, as detailed here: http://mynokiablog.com/2011/11/08/how-to-hard-reset-nokia-wps-three-finger-restart/
There have been a fair share of problems reported of the AT&T variants of the 920, and a reset has often solved it. Try it and report back to us how it goes.
Failing the hard resets working, you will need to take your 920 back to your point of purchase, or if they are not helpful, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care point: http://nokia.com/support

ZTE Open C reboots during calls

The phone reboots during calls. OS version 1.3, latest according to ZTE.
Thing is, only when it is set to use 3G. But if I set to 2G the audio is absolutely terrible.
Both when using 2G and 3G sometimes the calls get cut-off on the receiver phone. I can hear the other person talking but the other person doesn't hear anything. This is another issue.
What can I do? The phone was bought from Ebay on September 2014.
Problem didn't start now, ZTE Ebay support said the issue was a SIM one. I recently changed to 3G because the noises in 2G are almost unbearable.

''Ralph Daub [[#answer-713346|said]]''
<blockquote>
Hi Falconet,
I understand you are experiencing rebooting and call quality issues on your ZTE Open C device.
Since ZTE is responsible for the Firefox OS build specific to your device, I would suggest following their advice.
You may be able to request a new SIM card for your device by contacting your carrier support.
I hope this resolves your issue. Please let us know if you have any other questions about your Firefox OS device.
Thanks,
- Ralph
</blockquote>
Hi,
What ZTE meant was changing carriers not just sim card. I can't do that for another 1.5 years. The reason they said is because the phone seemed fine for a while when using another carrier. Sadly, the SIM is fine since another SIM card from the same carrier does the same. Both are working fine on Android Phones.

HT4623 i tried to download the ios7 and when my phone rebooted it now says could not activate phone because the activation server cannot be reached, so now I can't get into anything on my phone

i tried to download the ios7 and when my phone rebooted it now says could not activate phone because the activation server cannot be reached, so now I can't get into anything on my phone

The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.

Phone reboots several times during the day. Any advice?

Phone reboots several times during the day. Any advice?

Try hopmedic suggestion and see if they helps, https://community.verizonwireless.com/message/923959#923959

What happens when your phone turns off during download?

My phone just died during download. The app was halfway downloaded and when I turned it back it was back to 0. Does my iphone caches any downloads? I`m worried about my storage.

reset by holding powerand home. Started several times then stopped resetting. Now has a red screen and reset does nothing. What next?

Phone Reboots when DM downloads Applications

I'm running DM 7.1.0.32 (Bundle 33) on Windows 7 Pro. Phone is running 7.1.0.746, was previously running 7.1.0.714, when I first noticed this problem.
Lately, occasionally when I connect the phone and select applications in DM, it hangs and if I press a button on the phone, the phone reboots. After the phone reboots, DM will talk to it and can read the applications without the phone rebooting.
Anyone had this happen or know of a fix?
Samsung Galaxy S5

Hi darylm,
I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
or
KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

8110 reboots during phone conversation

I have plenty of free memory and my BB functions properly all the time. However when I am on the phone the entire device just randomly shuts down and reboots. It just turns off and then turns back on like it normally would if I had turned it off and then on. It brings up the hour glass for a while and eventually is starts back up. What is going on? Everyone thinks that I am hanging up on them.
Thanks

Have you tried removing the battery and replacing it after one minute - let the phone reboot and see if this helps any?
Nurse-Berry
Follow NurseBerry08 on Twitter

WRT1900ac reboots during streaming

Router has been stable (for several days at a time) as long as Network Map is not used etc.
Witnessed twice: the router will reboot during video streaming.
Case 1:
Laptop 1 connected via 5G (n) pulling video over the home network (from desktop to laptop). 20 minutes into the session, the connection drops and the WRT1900ac reboots.
Case 2:
Laptop 2 connected via 5G (ac) streaming Netflix. About 20 minutes in, the connection drops and the router reboots.
Latest firmware. Both radios on "auto." Connect speeds and coverage are good. No signs of overheating (although I suspect the latter). As mentioned above, the unit is otherwise stable. Several days between incidents and both reboots are directly related to streaming. I have not played with the "Media Prioritization" widget, nor should I have to in a generic situation like this.
Suggestions SVP.

The 5Ghz radio is stable as i've gamed on it for hours. Unless there is interferences or an incompatibility issue with cllient HW, the radios are fine.
What Hardware version is your router?
What Firmware version is currently loaded?
What region are you located?
Has a Factory Reset been performed?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
What wireless modes are you using?
2.4Ghz Routers only: Try single mode G or N or mixed G and N?
2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
What wireless devices do you have connected?
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...
It may have been the bandwidth and connectons while streaming was over loading the router which may cause a reboot. Let us know if MP helps curb this when in this configuration.
Also the use of the Network Map app causes reboots and is a known problem to Linksys. So don't use it unless next release. We hope Linksys will get it fixed then.
grimley wrote:
An additional 90 minute session trying to make the router barf.
2 Netflix streams @ 5G (1 @ 700mbps + and 1 @ 300 Mbps)
1 YouTube stream @ 5G (@ 1.3 Gbps)
1 internet radio (@ 2.4G)
3 surveillance cams (2 @ 2.4G + 1 ethernet)
Couple of Android appliances
No drops / No hiccups
Monitored continually via: http://192.168.1.1/sysinfo.cgi
(Better internal logging would be useful).
Web operations appear to be snappier (via YouTube streaming client connected at 1.3Gbps).
It would appear that "Media Prioritization" has an effect (3 streaming test clients prioritized for "Web Traffic").
We'll see what happens in the coming days.

Reboot during lion installation

Hi @all,
i've downloaded lion from the App-Store.
After the download the installer startet automaticly and reboot the System.
The problem is, that the installer starts after the first reboot and failed with no error and shutdown the system.
After restart the MacBook Pro, the system reboots during the installation anymore,
what can i do ?
thx
forti

http://www.apple.com/support/mac/app-store/contact.html?form=account

The server gave an error during download: 500 Internal Server Error

Does this mean the servers are overloaded? I've installed Lion on two of my MACs. Can't get past the "The server gave an error during download: 500 Internal Server Error" message on my third system. Anyone?

It's NOT a problem with your computer - the Lion Server is being slammed with downloads and is at max capacity. (Per an Apple Rep)
You can either wait until later, or for those of you like me that don't want to wait, you can keep hitting Retry until it goes through. Just like calling a phone line that's busy - eventually you'll click Retry at the same time as someone else's download finishes and the download will start. (I only had to click Retry about 75 times )

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

HT1414 why wont iphone4 download ios6 without saying the software was corrupted during download

why wont iphone4 download ios6 without saying the software was corrupted during download what do i do n how do i resolve this i jus need an update as it is on ios4 still and *****

im having the same problem. i talked to a friend of mine who is basically a genuis and he said it probably is Apple's server...that so many people are updating and its causing this. i havent found a true answer yet, i tried to call apple support, but that was hopeless. i thought maybe restoring my phone or something, but i dont want to do that and then realize that if i waited til tomorrow or so that i didnt have to. but im stuck just like you guys!

Phone reboots during downloads

Similar Messages

Maybe you are looking for