Phone Remote

I have purchased phone remote for my playbook and downloaded the app for my Curve 9300 however i cannot see how i start using it as there is no icon on the tablet to get it started?
Solved!
Go to Solution.

go to your downloads folder on the phone. loojs like a square with a bb phone inside.
on the playbook look under the all.
Be a Shepard and not an iSheep.

Similar Messages

  • 7921g IP phone remotely?

    I have the Cisco 7921g wifi phone which is really cool works really well on Wifi with the UC500.  I notice it talks about USB, and when I connect it to my Mac it appears as a network interface.  Tried scanning the manual, but just wanted to clarify there's no way to use this phone remotely as a soft phone if connected to VPN is there?  Like not with wifi, but like if I connect on my Mac using IPSec VPN or on Windows, I can't connect this phone to my PC and use it as a soft phone instead of IP Communicator can I?

    No. Cisco wireless phones use USB for configuration only, and it's even possible to avoid using it altogether.
    All voice connectivity happens over WLAN.

  • TS4006 can you set up an icloud account on a phone remotely

    My daughter has lost her phone and I just found out that she never set up an icloud account.  So I cannot use the "find my iphone" app.  Is there anyway to set-up the icloud account for her phone with out having her phone?

    Unfortunately, no.  It can only be enabled on the device itself, not remotely.

  • Erasing configuration on the IP phone remotely

    Guys,
    is there any way to erase configuration on the IP phone CP-79XX remotely - through device web page ?
    Mladen

    One way is to use Berbee's Remote control software. We use it and it works pretty well.
    http://www.berbee.com/public/berbeesoftware/Remote.aspx

  • Can I set up restrictions on my child's phone remotely?

    I want to restrict access to a few things on my child's IPhone but he is out of town. Is it possible to do this remotely or do I have to have his device in my hands?

    You need the phone in your hands.

  • HT201365 Can I activate find my phone remotely if one if my iPhone is in Europe

    Can I activate find my iPhone remotely if one of my phones is in Europe

    What do you mean activate?
    Find my iphone has to be turned on manually on the device itself before it is lost.
    If it was activated prior to it's trip to Europe, you can track it.

  • Power up IP phone Remotely after energywise has shut it down

    All,
    We have a situation where we power down half our offices IP phones using energywise. We monitor the power usage using Solarwinds. No problem. However because or PC's are connected to the phones we can't use remote desktop to get to our PC's because the network will be down.
    Cisco IP phones don't respond to WOL packets. Tried that. Is there any way we can remotely power up an IP phone outside of energywise if we need to remote desktop to our PC's.

    Thanks for the reply, I was just wondering if there any software out there that could power the devices without the users logging into the switch to do it.

  • How do i turn on my i phone remotely to find it if its lost ?

    just trying to remotely turn on my phone i know it has charge i justr lost it last night help me

    If it is powered off there is no way to turn it on remotely. The following has other steps you may want to take such as changing passwords: If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

  • Blackberry Protect web service does NOT connect remote to my phone

    Can't find any similar problems on the net which is worrying...
    Bold 9700, regularly registered to BIS
    I installed Balckberry protect a few times hoping it would solve the problem
    Essentially It all works but when I connect via the web service, I cannot connect to my phone(I am emulating a lost phone scenario) I tried to block the phone remotely, play a sound, change the screen message...NOTHING works
    The backups are done regularly
    Can anyone help?

    I'd contact your service provider if the rebooting and resetting network settings did not work. A locked phone (locked to a specific network) will not allow you to connect to another provider's network. It is the phone itself that makes calls (which is why you can still make an emergency call from a phone with no sim card in it) and receives sms. The sim acts as an "enabler" so to speak.

  • Remote control between two phones ?

    Hi
    Is there any S60 application which could control another (similar) phone (N or E series) remotely e.g. via Bluetooth ?
    There are somekind of VNC applications at market, but there is always PC involved. In my case I would like to control another phone remotely when it (e.g. N95) is connected to TV set.
    Currently I need to keep my phone in my hand in order to change pictures or play music.
    Thanks in advance.

    This was meant for another group. Please disregard... unless you have a
    solution :)
    > I need to remote control machines located on Private Network "A"
    > (14.x.x.x) from a machine located on Private Network "B" (172.x.x.x).
    > Addresses on "A" are NAT'd. I have no problems when connecting via the
    > User object, however, when I attempt to connect via the Workstation
    > object the connection times-out.
    >
    > Ports are open.
    > I have selected Accept connections across NAT in the policy.
    >
    > Any suggestions?

  • FORGOT MY REMOTE FOR APPLE TV

    how do i connect to apple tv without my remote I have my I PHONE with me with no Remote I need to be able to configure my Apple TV to work with my I PHONE Remote app

    you can't
    you can use any apple remote you can borrow or you can buy a now one but to connect a new remote app you need a working remote or an ios device with a working remote app

  • I have Apple ID for using iTunes, but haven't signed in. Now my Ipad stolen, how can I use Find My Phone for finding my Ipad?

    Who can help me, to add my Ipad to Deviecs in Find My Phone. I was usually using my Ipad sign in iTunes for download music, but haven't signed in iCloud yet. Now my I Ipad stolen, how can I use Find My Phone?

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
    If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

  • Connectivity issues for random phones in CUCM 8.6 on Vmware

    I have a client that has problems with around half of there ip phones (6921 & 7945) after a situation with overheating in the serverroom. 
    The solutions was a 1 Publisher, 1 subscriber setup with each on a separate Vmware server. 
    The Publisher is connected to the Core Switch which is further connected to 4 distribution switches which again connect to 5 more distribution switches. They have around 200 ip phones connected to these switches that get assigned IP's with DHCP. 
    The physical disk that the Subscriber was on was destroyed the incident. The Publisher they recovered, but to do this they had to recreate the vm descriptor file and attach it to the flat-file. 
    So the current situation is that the system is running with only 1 Publisher and no Subscriber.
    There is also a license warning in the CCM Admin section, stating a License Overage (2 nodes used, but only 1 licensed.)
    The license status is not invalid though, and the license state is "Uploaded". This second node I suppose might be the Subscirber that no longer exists? The phones have more than enough licenses.
    When powered up the system seems to run as it should, but only about half the phones have connectivity to and can register with CUCM.
    I have tried to reboot some phones remotely by cutting the power on the switch interfaces where they are attached, but that made no difference.
    The console log on the phones that are down show TFTP Timeout & File Transfer Error.
    The phones that are up and running can be pinged successfully from the CUCM cli, but when pinging the others I get "Destination Host Unreachable".
    The strange thing is that it seems completely random as to what phones are up or down. On all switches there are connected phones with both working and non-working connections to CUCM.
    To try to pinpoint the fault I chose 2 devices on the same switch and compared the config for each interface, one that has connectivity and is registered, and one that does not have connectivity and is unreachable.
    Everything seems to be identical so I can't see what causes this error on the one, but not on the other.
    Also when I ping the ip phone with no connectivity to CUCM from any of the switches, the ping is successful.
    Anyone know what could be the cause of this behaviour?

    Hello and thank you for your time.
    The phones get there IP’s from a DHCP Server (Not the built in one in CUCM, but an external server). I have tested that the DHCP process works by powering off a phone (one of the phones with connectivity issues), deleting the lease, and then powering the phone back on and seeing the device request and receive a new lease.
    There is only one CCM group active and both servers are in this group with the Publisher as highest priority server. All phones are in the same Device Pool attached to this group.
    There are a lot of warnings regarding dbReplication & missing node due to the subscriber being gone. Also there is an issue with NTP server (see below). I will post more on this tomorrow morning.
    I have also attached the console log from one of the phones that can't register.
    NTP Alert:
    At Tue Jan 13 21:24:10 BRST 2015 on node 192.168.50.2; the following SyslogSeverityMatchFound events generated:  SeverityMatch : Critical MatchedEvent : Jan 13 21:23:49 CUCMPUB user 2 ntpRunningStatus.sh: Primary node NTP server; 192.168.50.6; is currently inaccessible or down. Verify the network between the primary and secondary nodes.  Check the status of NTP on both the primary and secondary nodes via CLI 'utils ntp status'.  If the network is fine; try restarting NTP using CLI 'utils ntp restart'. AppID : Cisco Syslog Agent ClusterID :  NodeID : CUCMPUB  TimeStamp : Tue Jan 13 21:23:49 BRST 2015   SeverityMatch : Critical MatchedEvent : Jan 13 21:23:53 CUCMPUB user 2 ntpRunningStatus.sh: The local NTP client is off by more than the acceptable threshold of 3 seconds from its remote NTP system peer.  The normal remedy is for NTP Watch Dog to automatically restart NTP.  However; an unusual number of automatic NTP restarts have already occurred on this node.  No additional automatic NTP restarts will be done until NTP time synchronization stabilizes. This is likely due to an excessive number of VMware Virtual Machine migrations or Storage VMotions.  Please consult your VMware Infrastructure Support Team. AppID : Cisco Syslog Agent ClusterID :  NodeID : CUCMPUB  TimeStamp : Tue Jan 13 21:23:53 BRST 2015

  • Find my iphone: how can the thief change the phone name?

    Hello.
    I have had 3 iphones stolen the last 5 months.
    Finally I got a ping from one of the stolen iPhones. I could follow it for almost 2 months. Since I am in a country were the police wont do anything it does not help me that I have name/address of the thief.
    But this strange thing happened last day/last ping I got from my stolen iPhone:
    Somehow the device is removed from my "find my iphone" list and/or the device have changed name.
    The device was locked with passcode/touch ID.
    I have changed password AppleID 3 times since the phone was stolen (well: The police wanted my password/AppleID to track the phone. Somehow the thief got this information and I found out when my address book had 150 new entries from the thief).
    I managed to change password and lock the phone remotely after that incident.
    To bad I cant ask Apple any question.
    How can a device be removed from my account? (I have not got any warnings that someone have logged into my iCloud account from a new device/location)
    How can a thief change the name of a stolen iPhone that is locked with touchID/Password/passcode? (Iphone6).  Is there still DFI attacks that can wipe the phones?
    How can I check if my account is hacked?
    Why cant I remotely detonate my iPhone? The battery would be a nice little bomb making the phone worthless?
    (and F lazy Russian tourists police that just ask "what should we do" when I provide address/name/video of a person that have stolen stuff worth over 5000 dollars including iphones/Ipads)

    Hi Brirendine,
    Take a look at the instructions below for what to do when you sell your iPhone.  If you have followed all of these steps, the new owner should contact his/her carrier to activate the phone.
    iCloud: Activation Lock
    http://support.apple.com/kb/PH13695
    With iOS 7 or later, Find My iPhone includes a feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen. 
    With Activation Lock, your Apple ID and password are required before anyone can:
    Turn off Find My iPhone on your device
    Sign out of iCloud on your device
    Erase and reactivate your device
    Important:    Make sure to remember your Apple ID and password, and that your password is unique and secure—someone else shouldn’t be able to guess it. For more information, see the Apple Support article Security and your Apple ID. 
    If you want to give away or sell your device, be sure to erase your content and settings (in Settings > General > Reset > Erase All Content and Settings). When you erase your content, Find My iPhone and Activation Lock are also turned off. 
    If you no longer have the device, follow the instructions to remove a device you no longer have. For more information, see the Apple Support article What to do before selling or giving away your iPhone, iPad, or iPod touch. 
    If you’re purchasing or selling a used device, you can check its Activation Lock status at icloud.com/activationlock from a Mac or PC. 
    For more information about Activation Lock, see the Apple Support article Find My iPhone Activation Lock. 
    Last Modified: Jan 8, 2015
    I hope this information helps ....
    - Judy

  • Using Keynote remotely via a WebConference

    Does anyone know of a process in which one can create a Keynote that is presented live in front of an audience, along with being filmed during the presentation and allow remote users to view both the video of the presenter and the live Keynote screens? Very similar to the Apple webcasts of Job's keynotes.
    Thanks.
    dan

    Hey I was having trouble with this too. I got it to work for me. I have an iPad 2 and an iPhone 5. The fix for me was simple. Turn off WiFi for both your iPad and your iPhone. Turn on Bluetooth for both your iPad and your iPhone. Then KeyNote > Tools > Advanced > Remote. You don't have to do anything just have your Phone Remote app running and the bluetooh enabled when you hit remote on your iPad. They should find each other.
    I've had to do this each time I use this function. There should we a way that you can just choose to use Bluetooth.

Maybe you are looking for