Phone "repair" stuck at 83% for last 3 hours

I hooked my galaxy s3 to my pc this morning to download the new software update. as far as I can tell the software updated but then the Verizon thing recommended that I "repair" my phone... so I did. my problem is that now after 3 hours hooked up and "repairing" it has stopped at 83% and wont move. the pop up tells me NOT to disconnect my phone from my pc and my phone is black with an android that says underneath DOWNLOADING... DO NOT TURN OFF TARGET!! in the upper left of my screen it says in red ODIN MODE with various info under that.
how do I stop this "repair"?!?!?!?! without wiping my entire phone of course
SOMEONE. PLEASE. HELP. ME!!!!

    lynnsarah,
Help has arrived! We're sorry to hear of the issues you are experiencing with your device, but would love to take a closer look.
Before performing this update, did you back up all of your content? Is your device still displaying or stuck at the 83% mode for repair completion?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • I have downloaded a fil on itunes through my phone and its been stuck on processing for half an hour what do i do

    i have downloaded a fil on itunes through my phone and its been stuck on processing for half an hour what do i do

    I suggest that you try to use Tiny Umbrella to kick your device out of recovery
    The link to download Tiny Umbrella is shown below
    http://thefirmwareumbrella.blogspot.com/
         On the right hand side of the link you will see links to download Tiny Umbrella
    After downloading and opening tiny umbrella, Click on exit out of recovery. Hope that works for you. If it doesnt work, try to write a detailed description of your problem and what is appearing on your screen etc and we will go from there. Good Luck

  • How to make report for last 24 hours?

    Hello,
    I have a little problem, I can't make report for last 24 hours.
    Example:
    If I am running report on 2.1.06 at 14:00, I want to get results from 1.1.06 14:00 to 2.1.06 14:00.
    How do i make a report with this selection?
    Because,if I choose date from 1.1.06 to 2.1.06 and
    hour 14:00 to 14:00, I will only get results on 1st and 2nd on 14:00.
    If I choose 1.1.06 and 2.1.06, 14:00 to 24:00, I won't get results for 2.1.06 from 0:00 to 14:00.
    Because all selections use AND to get results.
    How can I choose that system compare selections with OR?
    How can I get results for last 24 hours?
    Best regards,
    Uros

    Hi,
    define a structure in your query with two entries. First one with 1.1. and > 14:00 and second one with 2.2. and < 14:00. Perhaps you need to fill the structure by user exits.
    Hope it helps,
    Leo

  • My phone is stuck on "searching" for network after power down - help!

    I uploaded the new 6.0.01 software 2 weeks ago and my phone flipped out so I took it into Apple store and they gave me a new SIM card and the ATT rep told me to power down my phone every week or so.  So I powered the phone down last night and since I turned it on this morning it is stuck on "searching" for network.  I have WIFI in the hoouse so I have email use but no phone or texting.  How do I get my phone back on track and connected to the Netwrok?
    Thanks so much!

    Hello Andres.J,
    Thanks for using Apple Support Communities.
    Take a look at the following article, specifically steps 3-7 since you have already restarted the iPhone.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Take care,
    Alex H.

  • HT201263 I downloaded IOS 6 fine, but have been stuck in reboot for over 5 hours. All I have is a black screen with the loading icon at the bottom. What should I do?

    Help! I downloaded IOS6 onto my iPhone 4. The download went fine, but I have been stuck on the reboot sction of my phone for over 6 hours. I started the process at 10:30 PM EST, it is now 5:13 AM EST. What should I do? The nearest Apple Store is hours away.

    Ron wrote:
    I beg to differ.   I didn't miss any point about the button being held in but you did miss the point that disengaging the earthing does make a difference at times . . .  
    What I wrote was. . . . . .  "and maybe switch the power off the computer, or pull out the power plug, keeping it out for about ten seconds before the restart ?   That, you will note, is a plus to the correct information!"
    One more time, the Mac is ungrounded (no earth), the magsafe (in countries like the UK) has a 3 pin plug but there is still no earth connection beyond the ac adaptor, after that it is Dc positive / negative. Regardless of the foregoing off is off, no current flows!

  • Getting same invites for the same even through calendar for last 6 hours

    My girlfriend sen up a event on her iPhone 4S and invited me to it on my iPhone 5.  She set up the even yesterday and i only got a email notification 24 hours later, which is not the problem. The problem is that since today when the first email came through I gave a email every minute for the last 6 hours. At first I accepted it then I declined and now all the emails are coming back saying I have declined it which is to stop it but it still keeps sending them. When I look on the laptop in her sent folder I can see the hundreds of emails sent to me for the event.  I don't no why its doing this and we have done it before and no issues but today its gone all messed up and i just need no WANT to stop receiving  the emails.
    Her phone exchange is connect to hotmail so I don't no if that is a issue.
    But please can someone tell me how to stop it before I throw my iPhone and iPad at the wall.
    Thanx

    read this thread sounds like the same issues the rest of us are having
    http://discussions.apple.com/thread.jspa?threadID=1246649&tstart=0

  • The downloading of Photoshopcc is stuck at 52% for 1/2 hour

    the downloading of Photoshop CC is stuck at 52% for 3/4 of an hour. what can be done  to complete

    Hi larry esq,
    Which OS are you using? Are you on a managed network. You may try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
    Kindly follow the very important instructions before download.
    Regards,
    Romit Sinha

  • HT5457 Unable to activate my new. 4s for last 4 hours? Response says server not available? Try later. How long is reasonable?

    Unable to activate my new IPhone 4s, response says activation server temporarily unavailable. Have tried continuously over last 4 hours, how long is reasonable before I seek alternative action? It tells me to keep trying!

    If this is a brand new iPhone 4S, contact whoever you purchased
    it from. If you got your iPhone 4S from other than Apple or an Apple
    authorized reseller, your iPhone was most likely hacked or jailbroken
    in the past and the update servers are sensing that.
    If this is an iPhone that is new to you but purchased second hand,
    it most likely was jailbroken. Return the iPhone, get your money back,
    and purchase from Apple or an authorized seller.
    If this is occurring because you just updated or restored your iPhone,
    the iPhone has become relocked to the original wireless carrier. You need
    to contact that original carrier to see if they offer unlocking and if you qualify.
    What does it say when you look at Settings=>General=>About=>Carrier?
    Is there a valid sim in the iPhone?

  • Help! Phone update stuck on 7% for the last 6 hours!

    I was told i needed to update my phone (curve 9360) to the latest software. so i did all the necessary things needed, and then it got down to the actually installing, and the screen was said:
    Backing Up Your Data
    social feeds: |                             0%                   |
    Overall Backup process: |                                 7%                |
    it was on this for 4 hours, so i took battery out to restart, when i did turn it back on, it got back to 7% and stopped. help, i need my phone urgently as i have NO way of contacting anyone - therefore wont be able to go to work, because i cant contact the person who gives me a lift. I cant contact anyone in an emergency. I was expecting an important call which obviously i have missed. HELP HELP HELP HELP HELP!!!!!!!!!!!!!!!!!!!!! PLEASE!!!!!!!!!!!!!

    Hey ChristyMolloy,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Currently you will need to finish the update using a PC by going to www.blackberry.com/update
    Also check out this article on how to create a backup file properly without Social Feeds: www.blackberry.com/btsc/KB29522
    Let me know if you have anymore questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Anyone else's Order stuck in Memphis for last hours?

    Hi, 
    My fedex tracking shows delivery on monday before Pm but it  has not moved from initial picked up hub, Memphis. It shows in transit!!!  I am in ND. I hope it make on monday, just wanted to know if anyone else is having same problems!

    I don't think any are stuck in Memphis.  I just think they suck at updating the info for you.  Mine was there until last night, and it suddenly is in Pittsburgh this morning.  No worries, you should have it tomorrow!

  • For last 24 hours we have not had a mobile phone signal. NR12 8UN

    Can you tell me what the problem is please? Post code NR12 8UN

    Can you tell me what the problem is please? Post code NR12 8UN

  • Cannot update to iOS4.... stuck at backup for over 5 hours now.

    I've been trying to update my 3G to iOS4 all day now, and its just sitting at the backup screen. I backed it up manually (right-click iPhone, backup) right before this, and it was fine, didn't take longer than usual. Then I told it to update to iOS4. It did the whole 'preparing for backup' thing, then went on to the actual backup. It got to about ~10% of the progress bar, and got stuck there. I left to go do somework and let it sit there and 'backup'. 5 hours later, I got back, and its still at the same ~10% spot. The progress bar does the whole windows scrolling effect so its not frozen.... What's going on??

    OK, I had the same issue about it backing up for long time. I cancelled.
    I read in one of these posts to back up prior to installing 4.0. Then hit restore. I did that and I now have 4.0 on my phone. But guess what- the restore went to factory defaults. No data, no apps, no photos, no music.
    They are in my iTunes, but I have to manually select if I don't want them all on my iPhone.
    There was no option to LOCATE the back up I had just done ... where is it? Do I really have to reinstall everything?

  • Battery sign has appeared for last 2 hours

    I recently succeeded in getting my ipod going (by accident to be honest!) after 6 months of being out of order whilst out of the country. This evening, after a couple of weeks of working fine, the inanimate battery sign has appeared for the last 2 or 3 hours. It's clicking as it does so, and alternates to the sad face icon.
    I've tried resetting (no joy), and when I launch the updater, it fails to recognise the connection with the ipod
    Would appreciate any help than can be offered
    20Gb   Windows XP  

    Is the charging icon visible, indicating the phone is actually charging?
    Also:

  • How do i get rows for last one hour

    Guys,
    How do it retrieve rows as of last hour from the database ? I wrote this but doesn't seem to return the rows
    select timestamp from Plan where to_date(timestamp,'DD-MON-RRRR HH24:MI') > to_date(sysdate - 120/1440,'DD-MON-RRRR HH24:MI')
    Thanks
    G

    What version of database are you on?
    some 9i versions, 10g and above have flashback query
    If you want to know what your rows looked like 1 hour ago you an issue a flashback query (you need appropriate privileges to use it)
    eg select * from table_name as of timestamp (sysdate - 1/24)
    where condition.
    If are you looking for all rows inserted in the last hour then you have to have some sort of timestamp in a database column. ie its a design issue

  • Export all Errors and warnings event logs from Application, security and system for last 24 hours and send it to IT administrators.

    Dear Team,
    I want a powershell script to export servers event logs into excel and it send that file to IT administrators.
    Excel format:
    Server Name, Log Name, Time, Source, Event ID and Message.
    Require logs:  
    Application, Security, System, DFS Replication and Directory service.
    And these excel file has to be send to Email address.
     And it would be good, if i get a script same for Hard disk space and RAM and CPU utilization.

    Here are some examples:
    http://gallery.technet.microsoft.com/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=logs&f%5B0%5D.Text=Logs%20and%20monitoring&f%5B1%5D.Type=SubCategory&f%5B1%5D.Value=eventlogs&f%5B1%5D.Text=Event%20Logs
    ¯\_(ツ)_/¯

Maybe you are looking for

  • Transfering music from media player to itunes

    I am having trouble transfering music playlists from my media player to itunes. I have tried the 'add a folder' and 'add a file' options and when I click it nothing happens. I have also tried moving the playlists to different files and tryig to add t

  • Webdav using Client Certificates

    Hello all Finder (10.5.6) seems not to be able to use Webdav with client certificates. Especially in conjunction with Alfresco Share this would be nice. Any ideas? Pascal.

  • Displaying the correct value of Y in page X of Y when running a batch

    Hi There Does anyone know how I can re-set the Y of page X of Y in the footer for each PO when running a batch? I am using <?for-each@section:G_HEADERS?> which is working great for each PO - re-setting the PO number in the header and re-setting the X

  • Solved\ Random lockups/system freezes AMD 6850 crossfire mode

    Hello all, I have come to these forums because i have a problem for 4 months now and i cant seem to figure out. First my systemspecs: Asrock X79 extreme 4 slot 2011 (Bios version 2.0 (latest)) Intel i7 3820 16 Gig Geil 1600 DDR 3 memory (4 dimms) 2 x

  • Create a Task, for use in "Deferred Task"

    I am in the processing of creating Deferred Tasks for my Update-User workflow. I know how to create these easily. My problem is : the actual "Task" itself, which will be called upon from the Workflow. I don't know the proper syntax for it. For instan