Phone reset does not clear status screen

we have a couple of applications that reset the phones. we have noticed that a reset on a 7941 does not clear the display (that is, the old message "Resetting, please wait ..." remains on the screen). The 7940s and 7960s are fine. does anyone know why this is?
Version in use is:
Load File TERM41.7-0-2SR1S
App Load ID Jar41.72-1-0-1.sbn
JVM Load ID cvm41.72-1-0-1.sbn
OS Load ID cnu41.72-1-0-1.sbn
Boot Load ID boot41.3-2-2-0.bin
I also have tried SCCP41.8-2-2S
And SCCP41.8-0-4SR3AS
(These are the latest available on CCO)

Marc,
The Factory reset or Restore to Factory defaults is geared towards the "Configuration" of the DMP. The contents within flash are not removed as you have seen. The FAQ that you reference is a good way to remove the files if so desired. So the DMP is working as designed.
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

Similar Messages

HT201412 Hi, I have an iPhone 5S went into recovery mode and Restore does not clear up the problem, how to solve?

Hi, I have an iphone 5s went into recovery mode and reset does not clear up the problem, How to slove?

imansoheili wrote:
Hi, I have an iphone 5s went into recovery mode ...
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

My iphone 4s keeps shutting down on it's own and seems to restart itself. Pressing the home button or trying a hard reset does not turn the phone back on. Is anyone else having problems like this?

My iPhone 4s keeps randomly shutting down. It usually does this after it's been sitting in sleep mode for a few minutes. Pressing the home button or attempting a hard reset does not turn the phone back on. It seems to turn on on it's own. It has done this since I got it and seems to be doing it more frequently. I've only had the phone for about 2 months.

Welcome to the Apple Community.
This isn't a Home Sharing problem, you will get better answers posting in the iPhone community.
https://discussions.apple.com/community/iphone/iphone_hardware
https://discussions.apple.com/community/iphone/using_iphone

7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

My touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

my touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

I cannot use it. I can get calls and text messages but I can't respond because the screen is locked and I can't "slide to unlock" because the touch screen does not work.

Badge on phone icon will not clear

Since upgrading my iPhone 4 to iOS 5 the badge on my Phone Icon will not clear, it shows up with no number in it and shows on the home screen icon as well as on the voicemail tab inside the phone app. I have tried a reset, turning the badge settings on and off again, quitting the phone app and NOTHING works.

Hi there Sean.
Yes this is a problem with the Sim.
I've only ever seen this from orange with regards to this particular model of handset.
If you take your phone to you rnearest orange shop and ask them to supply you with a new sim card then im pretty sure that will solve your problem.
The staff will probably tell you otherwise and ask you to take it to a CNSP but be firm.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Conversation does not appear on screen

One particular instant messaging conversation does not appear on screen. I am notified when a new message is sent to me, and when I hover over the Skype icon on the Windows toolbar I can see the icon for the conversation window, but the conversation itself does not appear. All other conversations appear just fine. It happens to be a running conversation with my boss, so I really would like to fix it. Currently when I get a message in this conversation I have to use Skype on my phone to participate in the conversation, but it is much faster to type on my computer keyboard than on my phone. Thanks for your help.

Computer clock time is correct. No, it hasn't been wrong, or at least I have never had to reset the time, it's always been correct. This is the only conversation this is happening with. It's still happening. I have to go to my phone to message in this particular conversation. My boss was on leave for awhile and so this conversation was inactive for a couple of months. It was working fine before she left. One more piece of info ... I used to have two monitors, now I'm using only one. But switching to one monitor didn't affect any of the other conversations I participate in.

My iphone4s does not lock the screen automatically when playing music and charging

My iphone4s (iso5.1) does not lock the screen automatically with the condition in charging and playing music.
System has been set to lock the screen in 1 mins.
Everything goes fine when not in charging, the system can lock well even playing music.
System can lock as well when all the music playing apps are closed, even when charging.
I don't think that's my apps' problem, all my music playing apps have the same problem.
My ipod has the exact same problem described above, I believe that's an iso system bug.

It's not something i'm familar with but i will forward it internally for investigation. Could you please send me a PM with the IMEI of your phone and the build number? You can find these under Settings -> About phone and Settings -> About phone -> Status.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

Error-IM258-Object does not exist (Status Management)

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan

l have same problem my code below
help me please .
if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
        TITLEBAR       = 'E-mail'
        TEXT_QUESTION = 'E-mail Göndermek istiyormusunuz ?'
      IMPORTING
        ANSWER         = answer
      EXCEPTIONS
        TEXT_NOT_FOUND = 1
        OTHERS         = 2.
if answer eq 1 and ulke = 'TR'.
lt_mailtxt ='Değerli Müşterimiz,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt =''.
APPEND lt_mailtxt.clear lt_mailtxt.
data: it_packing_list like sopcklsti1 occurs 0 with header line,
       it_receivers like somlreci1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes.
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'sinan.tataroglu@***.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[]
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
elseif ulke ne 'TR' and answer eq 1.
lt_mailtxt ='Dear Customer,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Thanks for your complaint.'.
APPEND lt_mailtxt.clear lt_mailtxt.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'peykan.samli@****.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[] "it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

I hate my Motorola Droid Razr! After 3 years it has turned out to be a real crappy cell phone. Does not belong in the "smartphone" category. Forever freezes up, doesn't respond to anything I ask it to do. I am purchasing another brand of smartphone an

I hate my Motorola Droid Razr! After 3 years it has turned out to be a real crappy cell phone. Does not belong in the "smartphone" category. Forever freezes up, doesn't respond to anything I ask it to do. I am purchasing another brand of smartphone and will NEVER go back to Motorola again. I have tried many help/support tutorials and solutions and nothing works.I HATE THIS PHONE!!!

If you've had the phone for 3 years, then it's time for something new. The Motorola phones I've had have been pretty solid, but if you want to switch brands or even providers, then go for it.
Technology changes so quickly that a 3 year old phone, regardless of manufacturer, is likely to seem slow, buggy, laggy - simply because it doesn't have the power to match the network capabilities NOW. If it's only capable of 3G speeds, it will be slow compared to a phone with 4G capability. After three years of use, the internal memory may be maxed out, especially if you haven't cleared stuff out, wiped the cache, etc, causing freezing and non-responsiveness. It may not have enough RAM to effectively run updated apps....
I would say you are due for a new phone - so compare the newest models, go to a store and try them out, and then get whatever brand and model will work best for you.

Phone reset does not clear status screen

Similar Messages

Maybe you are looking for