Phone resetting in middle of phone calls
My phone keeps resetting about two minutes into a phone call, the phone go to the apple logo and look like a hard reset. Also sometime the screen shows the battery with a power symbol as if the battery is dead, but when the phone resets the battery is still good. Has anyone had the same problem and how did you fix it. Thanks
Have you tried restoring your iphone?
Similar Messages
-
Phone resets in middle of a Phone Call
We have an UC560 with 12 SPA525G2 phones and a AP541 forwireless.
From time to time when we are in the middle of a call the phone soft-reset, and then when the phone is rebooting it can't connect to the AP (it just "hangs" in the connecting to AP screen) and to make it work again i have to remove the power cable...
All was configured using CCA, and wifi works correctly for computers (we have 2 vlans, one for voice and one for data).
I've already tryed changing the phones and the problem still ocurrs... i've tryed deleting and recreating the user in which ocurrs often the issue and nothing....Hello Saul,
Please review the Voice over Wireless Guide: http://www.cisco.com/en/US/docs/voice_ip_comm/sbcs/deployment_guides/voice_over_wireless/sbcs_20_vowifi_deployment_guide.pdf
This guide provides reference design for SPA525G2 and AP541N, and provides the specific configurations to ensure voice quality over the wireless.
Please let me know if you have any questions regarding this.
Hope this helps.
Thanks,
-john -
My speaker stopped working right in the middle of a call, I have reset my phone and powered off and back on
And it still will not work, I can hear sound trying to come
Thru randomly and goes right back out!! :( what do I do to fix this??http://support.apple.com/kb/TS2802
-
phone is frozen in a middle of a call and my top restart button do not work, how can i fix it
Bummer.
Without having the top button, you couldn't do a hard reset.
I'd say you might be looking at backing up and restoring through iTunes unfortunatley. -
Phone falls asleep in middle of a call
I was in the middle of a call and being asked to press 1 for such and such and the phone just went black even tho the call was still connected. Couldn't do anything to get the screen up and I had to reset. This never happened on my original phone. Anyone else? Any ideas what the problem might be?
If its your original iPhone case that would be the problem.
If the case covers the top of the phone around the earpiece then it will also cover the sensors. Apple moved the sensors in the new phone so most full cover iPhone original cases will not work correctly with the iPhone 3G as it will thinkyou always have your head against the phone and so blanks the screen.
To test, remove phone from case and try it, think you will find it works fine. -
My iPhone 4s is closing out when texting,playing games and in middle of phone call! I have restore phone anyone with same Issue?
My phone will go black and it drops the call or game will restar, I have call apple care and they had me restore the phone with I tunes and nothing change! help!
-
Help! my phone hangs up in middle of a call
My phone cuts out in middle of a call. Either buts call off entirely or one party cannot hear the other.
I have received a replacement phone from Rogers but this phone does the same thing.
My BB Curve 8900 is only 3 months old. Any ideas? Need helpIf its your original iPhone case that would be the problem.
If the case covers the top of the phone around the earpiece then it will also cover the sensors. Apple moved the sensors in the new phone so most full cover iPhone original cases will not work correctly with the iPhone 3G as it will thinkyou always have your head against the phone and so blanks the screen.
To test, remove phone from case and try it, think you will find it works fine. -
7940 phone resets when try to transfer a call
When I am engaged in a call on my 7940 and wish to transfer a call. I press the transfer softkey and the phone resets. If anyone can give me some ideas and or solutions it would be greatly appreciated.
Following guide line help you for transfer the call.
if user B has an active call on a particular line (from user A) and user B has not reached the maximum number of calls on this line, the Cisco Unified IP Phone provides a Transfer softkey to user B. If user B presses the Transfer softkey (or Transfer button, if available) once, user B receives dial tone and can make a secondary call: user B dials the number of a third-party (user C). Cisco Unified CallManager provides a Transfer softkey to user B again. If user B presses the Transfer softkey again (or Transfer button, if available), the transfer operation completes.
With the onhook call transfer implementation, user B can hang up after dialing the number of user C, and the transfer completes. Both the existing and new implementations work in the case of a blind transfer (user B disconnects before user C answers) and also in the case of a consult transfer (user B waits for user C to answer and announces the call from user A).
The previous implementation remains unchanged: user B can press the Transfer softkey twice to complete the transfer. -
I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!
I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.
-
My phone will not send or receive calls
My phone will not send or receive calls; it goes straight to voicemail and when I try to send a call, it will not connect. I have reset, rebooted, and tried just about everything. Any other suggestions?
What did your carrier say when you contacted them and reported the problem?
-
I have installed a ringtone but phone does not ring on incoming calls
I Have an Iphone 4S, it came with vibration set as default ringtone, I changed the ringtone but the phone does not ring on incoming calls, What is wrong?
Also, you may want to do a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers, so that everything is reset.
-
my iphone 5 wont let me download apps keeps rejecting my password , i have reset it on the phone and via appleaid several times no luck
Try to backup then restore your phone and download your apps back from the backup it should work. Hope that will help you.
-
How to connect my phone to macbook air for the call feature ?
Hi, my macbook air, 2014 just upgraded to OS X Yosemite. My iPhone is the 5 version, iOS 8.02. I don't know how to connect my phone to the mac for the call feature. What should I do first?
Thanks very much!Check these settings:
On the phone:
On your Mac (FaceTime Preferences):
Your AppleIDs for both need to be identical, and both using the same WiFi network. -
My I phone 4 keeps going to voice call. This happens when I push the home button. It also happens when the phone is just laying on my desk or in my pocket. I have turned phone off and on. I have done a hard restart also. The home buttom seems slow to respond as well. I keep getting calls back from people in my contacts list who say I called them, when actually the voice control/call did it while i was away from my phone. Frustrated and needing help! Thanks!
Follow the directions here:
http://support.apple.com/kb/ht3577 -
got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?
Maybe you are looking for
-
File download from DMS into Webdynpro for ABAP application
I need to download the file from DMS content server on the PC and with my application on clicking of file name, file needs to be displayed. To achieve the downloading part I tried BAPI_DOCUMENT_CHECKOUTVIEW2, but it is not working. If I pass the para
-
I cannot send any messages from my iPad. The send button is not lit up. My setting are on. When I put the address in it comes up in red with an exclamation mark
-
How to store a PDF in a BLOB column, then select/search it using SQL?
We have a simple requirement. (1.) We have an Oracle 10g DB. (2.) We want to store PDFs/MS Word docs inside BLOB column in a table. (3.) We need to show PDF/MS Word content to the user, without opening the PDFs/MS World like we normally do (i.e. Usin
-
Can't add to lists with workflows
Our security person turned windows firewall on this week. Now users can't add to any list that has a workflow attached. The only thing I can find in logs is "This event is generated when a logon session is destroyed. It may be positively correlated w
-
Outgoing mail is sent repeatedly, outgoing mail is sent repeatedly
I have tried to send a mail via my account with German t-online-Mail, size abt. 5 MB, this mail is sent repaetedly and not saved in the file sent. My iMac keeps sending this mail as it seems for ever. Can someone help me? Juergen Jessel [email protec