Phone says "call failed" with full service
at school, especially, my phone has 3, 4, or full bars, but when i try to call someone, it either says call failed, or just doesn't ring, and keeps trying to call for minutes and minutes.
it only happens from time to time, but more often than not.
it can work in one spot one day, but not in the same spot the next.
Try what is suggested here
http://discussions.apple.com/message.jspa?messageID=5851978#5851978
Similar Messages
-
I can't make or recieve calls because it says "call failed" even with a full signal. All other functions work fine. I've reset and restored the phone and it didn't help.
i had that twice i am now on my 3rd iphone because of the problem it wont go away tho, so i would do as i did goto apple and they will give u a replacement, aslong as it hasn't got wet..
-
Phone said call failed and lost service now has barley any service
I was on the phone and the call failed and then told me I had no service and now has barley any service and im in a normally high sevice area.
And what have you done thus far to troubelshoot?
-
Can't make a call from my I phone Always say call failed
Hello
i have a problem with my I phone that it new phone and i didn't use it until now but i have a problem with it that i can't make a call always say call failed , i changed the sim card but i still have the same problem .
so can you please help meFirst try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
Phone calls cutting off or saying call failed
hello. i have an iphone 4. recently upgraded to IOS7.
for the past few days everytime i make or recieve a call it always gets cut off or says call failed.
can anyone assist me with this?
thanks
aadilI am having this same problem. I have an iPhone 4 AT&T, which until today had iOS 5.1. Over the last month or so, I have been either dropping calls, or the person whom I am speaking with can no longer hear me speaking, but I can hear them. AT&T made me upgrade iOs 7, swearing that it would solve the problem. Now I can't complete a call, and have a $100 per month paperweight that looks like Apple should be paying royalties to VTECH as my phone looks like a leapfrog children's toy instead of a phone. AT&T is "looking" for a solution to my area's coverage, which has been perfect for the last 24 months. Any advise would be greatly appreciated. Also Apple: If you actually read these, let us choose what the desktop looks like because it looks like a lot of users HATE the new one.
-
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB -
I bought an iphone4 from a friend and he was using it on orange i have put my o2 sim in the phone and it is saying restricted network with no service any ideas thanks
That is because the phone is locked to the Orange network and an o2 sim card is not going to work with a phone that is locked to Orange.
You either need to purchase an Orange sim card and use that in the phone, or you need to get your friend to contract Orange and get the phone unlocked so that you can use an 02 sim card.
At the moment you will never be able to use the 02 sim card if the phone is locked to Orange. Either use Orange or get the phone unlocked. It is as simple as that. -
My iphone 4 says call failed and message failed?
It was locked to orange but just had it unlocked to work on my T-mobile sim. Had this issue even before I got it unlocked. I have just bought this off of somebody and it keeps saying call failed/call ended just after I have dialled and then when I try to send a message it says message failed, however, I can get onto the internet using my signal alone and not connecting to Wi-fi. Incredibly confused as to why this isnt working. I have full signal. Done a full restore on 2 different computers still with no result. Really at the end of my tether with this, someone please help.
Operating system 4.3.5
ThanksI faced similar issue where I was getting signal, able to receive calls, use all data services but everytime i went to make a call it said "Call Failed"
You need to try to go to Settings>>Phone>>>Show My Caller ID>> Ensure it is On.
Even if it appears on try switching off and on.
Mine was not allowing to switch off and on but something I did worked and then able to make calls.
Also try Settings>>>General>>>Reset>>Rest All Settings
I faced issue of not being able to make calls after switching my sim card from postpaid to prepaid. First it dint recognise the sim at all then on pluggin in to itunes i was able to activate and atleast receive calls, use all data only everytime i tried makinng a call it said call failed.
When i restored to factory settings it worked. However on restoring my backup i faced the same issue.
Apple local support was most unhelpful saying that i had to forget my data and work with a new phone without contacts, apps, etc -
My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?
If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee
try general>settings>reset>reset all settings and start up as an new phone.
-
Web services Connection_Operations.Logon call fails on Data Services 4.0
Hello,
We recently installed Data Services 4.0. We have a custom Java app which makes use of the web services interface. We had previously used Axis to generate the java class. With DS 4, it looks like the Logon method did change as it now requires the cms system and authentication. We manually updated the java classes to includes these, which has been our general approach in the past for newer releases. However DS 4 uses Axis2 and I'm not sure that this approach would work.
My problem is that the "Logon" call fails with very little details.
In viewing both the webadmin.log and WebService.log it only reports the following:
11/02/2011 18:42:17 [ SEVERE ] Logon failed. Error: null
I understand that I can control the logging detail . The Integrator Guide for DS 4.0, has the following instruction, yet there is no log4j.properties file on my system?
"To control the level of detail in the webadmin.log file, you must edit the log4j.properties file.
The properties file is located in:
LINK_DIR\ext\webserver\webapps\acta_web_admin\WEB-INF
To obtain a debug trace of events, change the log level from the default of INFO to DEBUG. For example,
log4j.rootLogger=DEBUG, A"
Any advise would be greatly appreciated
ThanksHello,
Unfortunately, stdout.log below doesn't show anything possibly due to some mis-configuaration of log4j.properties. In my previous post I requested info on which log4j.properties should be modified as the documentation in the DS 4.0 Integrator's guide mentions a none-existent path?
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
com.businessobjects.webpath.rebean3ws.Activator
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
null -
Cisco ip phone 9971 registration failed with CME 8.6 on WAN
Dear Sir
Subject: Cisco ip
phone 9971 registration failed
with CME 8.6 on WAN
I have a WAN simulation with one Cisco2811 router one Cisco1841 router (connected with fast Ethernet interface) plus one layer 2 switch.
I upgraded the 2811 IOS to 15.4M and installed CME8.6, when we tried to add 9971 sip phone If the traffic goes throw LAN (Same subnet- directly from switch to 2811) everything is fine and the SIP phone (9971) added with no problem but when I change the subnet and traffic goes throw WAN
( from 1841 routed to 2811 with default route) my phone didn't register.
It will be great if anybody could help!!
If you can solve my problem, I will be happy to compensate.Try binding SIP to an interface on which Phone can reach (Use "voice service voip" "sip" and then bind)
Udit -
hi This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
provisioning while i am not running anything.
please help!!!
10/03/2011 14:39:23.46 w3wp.exe (0x306C)
0x2FC4
SharePoint Foundation Topology
e5mc Medium
WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation)
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
128v Medium
[SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
128v Medium
[SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.Hi there,
A quick search showed the result on fourm thread:
It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
To read in support article.
http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82 -
hi can anyone help me im using my iphone to make a call to a number that has been changed two days ago but it automatically says 'called failed' why? please help!
Here's a nifty agorithm to fill an array of primes, using a forever loop with a labeled continue statement, from Horton's Beginining Java:public class MorePrimes
public static void main(String[] args)
long[] primes = new long[20]; // Array to store primes
primes[0] = 2; // Seed the first prime
primes[1] = 3; // and the second
int count = 2; // Count of primes found - up to now,
// which is also the array index
long number = 5; // Next integer to be tested
outer:
for( ; count < primes.length; number += 2)
// The maximum divisor we need to try is square root of number
long limit = (long)Math.ceil(Math.sqrt((double)number));
// Divide by all the primes we have up to limit
for(int i = 1; i < count && primes[i] <= limit; i++)
if(number%primes[i] == 0) // Is it an exact divisor?
continue outer; // yes, try the next number
primes[count++] = number; // We got one!
for(int i=0; i < primes.length; i++)
System.out.println(primes); // Output all the primes -
When making an outgoing call, it rings once and then says 'Call failed' - any solutions?
When making an outgoing call, it rings once and then says 'Call failed' - any solutions?
I had the same problem!! I had to complain quite a few times to AT&T & found out I had to get the 3G MicroCell device. You also have to pay an extra $20 a month for it! You have to purchase it yourself($200)...which is a bunch of crap too!! But they can research your area & when they finally figure out that it's a bad servise area they will give it to you for FREE!! Now my phone works like it's supposed to!! So check it out!! Good Luck!!
Maybe you are looking for
-
Is there any way I can see a full screen of thumbnails in Ver. 1.5? I sure miss that. Mac G5 2gig dual Mac OS X (10.4.7) Mac G5 2gig dual Mac OS X (10.4.8)
-
Report Supplier Lead Time - Days
Hi All, Can anybody give me the characters, key figures, CKF's, RKF's and other fields that are usually used in Supplier Lead Time - Days Report in general irrespective of the requirement.....come up what ever you remember from your side. Thanks All,
-
Change lock type on large table
I have a table which is about 2G size. the lock type on this table is set as AllPage. I think this cause performance issue when issue select query, many SH lock applied. I try to change the lock type to datarow, which should have no lock when issue
-
SQL Developer - how to limit rows in output
I want to look at a record (Select * ), but only want to view the first 10 rows, for field info. How do I limit the row output to 10 rows?
-
Okay the hard drive on my old ipod died. I got a new one for free and I then came back to my house to update it. However no matter how many times I restore the ipod, itunes refuses to recognize the ipod and on top of that every song in my library jus