Phone screen has too much white on it.

I've had my blackberry torch for almost two years now and I've either had to have it replaced or get it repaired about 7 times now. Now, the issue it that the screen has white lines going down it. They begun only ONE WEEK after I had gotten my phone back from repair after having the whole screen gone white, making it unuseable. But then white lines begun coming up on the right hand side, but as I need my phone for work, I couldn't deal with having my phone in repair for another week, but now it's gotten really bad and takes up about 70% of the screen. So I was wondering if there was anything I could do to fix it? My contract runs out in about a month so I'm not bothering with repairing it, I just want something I can actually use for emails etc until then....
Thanks!

Hello,
What you describe sounds like hardware, for which no amount of internet-distance diagnostics nor OS/software level "fixes" can be of any use.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

My screen has too much contrast

There is something wrong with my screen and it is hard to describe. The contrast or brightness is off and I have tried callibrating it using the color calibrator at least 100 times and it does not change it. When i turn my computer on, for the first 5 seconds or so it has normal color but then it goes back to this messed up brightness or something and i just need it to go back to normal somehow. Is there any way i can just go to restore default settings or something? Anything will help.

Just had to reply as well. I had the exact same problem as Jenny after my 16-month old son got ahold of the keyboard. It was driving me crazy! Your fix solved it right away. Thank you sooo much.

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

Why is my ipad screen has a ghoshtly white screen color?

WHy is my ipad screen has a ghostly white color?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Photshop Elements 9 Interface has too much contrast

Hi. I like the new version 9. But I don't like the interface. Why did they change it. It was great in Photoshop Elements 7. And they even had a option to adjust the appearance option. Not now though. To me it has too much contrast. Why did they have to leave out that option. The new interface is too bright and too dark. Oh well. I guess I will have to get use to it. I wish CS4 had a interface like Photoshop 7. Here's a screenshot of Photoshop 7.

Hi. I will get the new version. But I just wish it could have the option to change the interface like Elements 7. The best looking version in my opinion. They should have made CS5 look like Elements 7 too. Black interface is the new thing. Not dull dingy gray like CS5 is. It looks like the Windows XP classic themes. Boring. I like subtle black like beautiful Elements 7.

There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number. Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction there is a tones problems in the system. And this Will cause undirect problem for the iPhone 6

There is no apple here in this user to user technical forum.
Do this Use iTunes to restore your iOS device to factory settings

I update ios 7 on my i phone4 8 gb but my phone is lagging too much .

i update ios 7 on my i phone4 8 gb but my phone is lagging too much .
what shoud i do ???

Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

My Mac book pro screen has a constant white mark on it.

Hi,
My Mac book pro screen has a constant white mark on it, i have no idea why, its like its inside the screen, its never been dropped or had anything fall on it and the mark is starting to get bigger. Has anyone else had the same problem? i've inserted a pic of it, hopefully you can make it out.
Thank You

I see a multitude of white marks on your display. Your best option is to make an appointment at an Apple store genius bar and have the technicians examine the MBP. Hardware problems such as this cannot be solved via these forums.
Ciao.

My ipod touch screen has turned white. the screen has turned bright white. it is not going by reseting also. when i shift screens then it leaves a trail and i dont know what to do. please help.

my ipod touch screen has turned bright white. the things are visible but partially and when shift the screen it leaves trails behind. i dont know what to do help please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Too much white space to the right when previewing it in my phone using inspect. Why?

Using edge reflow to create a responsive landing page and inspect to connect to my device.
I tried to preview it but there's so much white space to the right which i can scroll horizontally through the screen.
my width is 100% even my container. why is that? Chrome preview is looking fine btw.
thanks for whoever can give me an answer advance!!

How does your page look when you make the canvas narrow in Reflow?
Vic

C100 has too much green in the video, doesnt disappear when adding magenta

So last night I was just doing some testing with the c100 and I noticed that in the viewfinder after auto white balancing, there ws a bit too much green in spots where there relly shouldnt be. I took some video and wanted to see if this was just something in the LCD screen or the actual video, and the green cast was indeed in the video. I went into the color profiles and tried adding magenta but it actually did nothing to reduce the green in the areas I was seeing it in and only made everything else more magenta.
I'm just wondering if this is a known issue or if anyone has experienced this and if there;s any real fixes.

Hi JerTob,
We are sorry to hear that you are still having issues with the color casts. I suspect that this has a lot to do with the color temperature of the lighting that you are shooting in. What you have shown us is indoors, it's hard to make a distinct determination on the lighting because you could have any number of temperature bulbs in the mix. This type of mixture of lighting can have distinct effects on the color casts you see in the final image. This is especially true if shooting with household bulbs in an overhead or something to that effect.
What I would suggest would be to shoot outdoors, with the camera calibrated for such, and see if the same effect occurs. Lighting indoors can be very tricky and most videographers shooting in a professional environment use specialized lighting to correct for such casts and work with a colorist in post production to correct for exacting color.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

S10e emergency shutdown when screen opened too much?

Type: 4187-5LG
When the screen is tilted too much the computer shuts down, and I have to remove AC power and the battery for 15 seconds before it can be started again.
I know it has a limit of 130 degrees, but the hinges are quite firm and it is not possible to tell when it is at the limit! - I have read the Hardware Maintenance Manual and was unable to find an answer.
Does the S10e have an emergency switch in the hinge, or am I hurting my new little workhorse?
Hans
Message Edited by hpholm on 01-03-2009 01:40 AM
Solved!
Go to Solution.

This sounds like either a brute force issue, or your machine has issues. My friend has an S10 and I can open the screen right to the stops and nothing happens. Note that I'm not pressing real hard, I open it until it won't open anymore and then stop trying to open it more.
If you're sitting it on the floor and doing handstands on the two halves to get it to open more, then that would be the source of your problem.
Since I assume you aren't doing something like that, I'd bet you've got some wiring issue near one of the hinges and something is shorting out somewhere it shouldn't.

HP Photosmart A616- Photo printing colour has too much blue tone

Hi,
I have a HP A616 photosmart. It was purchased a while ago, as well as the ink cartiage. Recently when I set it up to try on the printing quality, I realsed all photos that I printed contain too much of blue tone in them. I can still see the different colour in each photo but they are covered by a layer of blue colour on them. I didn't chose black& white or other colour function. Just the normal printing quality.
Has anyone experience the same with this device? Or any soloution or what way go wrong?
I was thinking could it be due to the ink cartiage used? It was stored for almost a year before I took it out to use.. will storing ink cartiage for a long period of time could damage the ink???
Thanks for anyone who can reply to this query.
SL

Hi Matt
Are the ink levels ok? You could try checking the cartridges are vented properly. More details in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02142902&cc=us&lc=en&dlc=en&product=4021935&tmp...
Please let me know how you get on
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Phone screen has too much white on it.

Similar Messages

Maybe you are looking for