Phone show " Temp Fail " error during call

Hi,
we have Cisco call manager ver.6.1 and i have configure 7985 iphone it get registered and every thing work fine but when i make call it shows phone regretting message and on the other end phone shows " Temp Fail".
any one have ideia what could be the cause .
Many Thanks
Moe

Hi,
The Temp Fail message refers to a network or connectivity problem, usually if the call is between 2 IP phones, one phone received an ICMP Unreachable from the other phone. If the call was PSTN/Ip phone, then the gateway lost communication with CallManager, probably the remote endpoint became unregistered.
You can use RTMT and check for the Syslogs in order to determine what is the disconnection reason.
You can also get a CUCM detailed trace to see what device got disconnected.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml
Regards,
Tere.
If you find this post helpful, please rate!

Similar Messages

PUG "Temp Fail" Error message....

Hi there guys,
I am having a problem at one of our sites using CUCM 8.5..... there are 2 pick up groups at the site and about 8 users in each group... if a call comes in on a handset, a "temp fail" error message is displayed on any handset that attempts to use the pickup softkey and an engaged tone.
The PUG's did work previously and they are complaining that this has recently just become a problem.. so I am pretty confident that the comnfig on CUCM is all correct and have checked it over and it all seems fine...
What else can I look at to try and get this resolved?

Hi,
The Temp Fail message refers to a network or connectivity problem, usually if the call is between 2 IP phones, one phone received an ICMP Unreachable from the other phone. If the call was PSTN/Ip phone, then the gateway lost communication with CallManager, probably the remote endpoint became unregistered.
You can use RTMT and check for the Syslogs in order to determine what is the disconnection reason.
You can also get a CUCM detailed trace to see what device got disconnected.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml
Regards,
Tere.
If you find this post helpful, please rate!

Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500

I get the following error when trying to connect to my BlazeDS Java server from Flex application. Flex application is on localhost:80, blazeDS on tomcat localhost:8080. Please help!
createUser();faultHandler():(mx.messaging.messages::ErrorMessage)#0
body = (Object)#1
clientId = (null)
correlationId = "9FFDEBE8-EAD0-F3D9-8E9B-E3D7D7F5AE79"
destination = ""
extendedData = (null)
faultCode = "Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
faultString = "Send failed"
headers = (Object)#2
messageId = "98F54E19-7B0D-DCB9-4B86-E3D7D84E484F"
rootCause = (mx.messaging.events::ChannelFaultEvent)#3
    bubbles = false
    cancelable = false
    channel = (mx.messaging.channels::AMFChannel)#4
      authenticated = false
      channelSets = (Array)#5
      connected = false
      connectTimeout = -1
      enableSmallMessages = true
      endpoint = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      failoverURIs = (Array)#6
      id = (null)
      mpiEnabled = false
      netConnection = (flash.net::NetConnection)#7
        client = (mx.messaging.channels::AMFChannel)#4
        connected = false
        maxPeerConnections = 8
        objectEncoding = 3
        proxyType = "none"
        uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      piggybackingEnabled = false
      polling = false
      pollingEnabled = true
      pollingInterval = 3000
      protocol = "http"
      reconnecting = false
      recordMessageSizes = false
      recordMessageTimes = false
      requestTimeout = -1
      uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      url = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      useSmallMessages = false
    channelId = (null)
    connected = false
    currentTarget = (mx.messaging.channels::AMFChannel)#4
    eventPhase = 2
    faultCode = "Channel.Connect.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
    faultString = "error"
    reconnecting = false
    rejected = false
    rootCause = (Object)#8
      code = "NetConnection.Call.Failed"
      description = "HTTP: Status 500"
      details = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      level = "error"
    target = (mx.messaging.channels::AMFChannel)#4
    type = "channelFault"
timestamp = 0
timeToLive = 0

halodev:
I made a CF/Flex site based on the Flexstore sample app,
using a database instead of XML as the data source; in case you
want to see it:
http://www.timos.com/dg/flex/DilemmaGames.html
At first I had troubles similar to what you describe;
initially, part of the problem was that my hosting company had not
yet upgraded to CF 7.02. One other thing I had to correct: when you
upload to your server, upload the entire ‘bin’ (or
whatever your output folder is) minus the debug SWF.
If it would help with other issues, contact me and I will be
glad to make my project code available to you. Good luck.
Carlos
[email protected]

Error during call to AdobeDocumentServer

Hi,
I developed an Interactive Form application in Web Dynpro (NWDS 2.0.18 & SAP WAS 6.40 SP 18).
When I tried to run the application, getting this error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "Render" operation. Request start time: Thu Mar 29 09:19:44 EDT 2007.
What causing the problem and how to resolve it?
Thanks
Thruna

Hi Sundar,
you can try to check the R/3 and ADS connectivity configuration.
You can refer to Notes No:944221, 682619 which determine the steps to test the ADSconfiguration and troubleshoot.
After you must install on client the latest versione af Adobe Reader and the right version of ACF (downloadable from marketplace).
Hope this helps you.
PS: Award points for good answers.
Best regards,
Gianluca Barile

Error during calling BPEL Process Using Oracle BPEL Process Manager Client

hi,
I have the following error during Calling BPel process and I can not detect the reason :
Exception in thread "main" java.lang.NoClassDefFoundError: javax/ejb/EJBException
     at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:76)
     at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:254)
     at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:83)
     at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:53)
     at portlet.BPELProcess.startProcess(BPELProcess.java:68)
     at portlet.BPELProcess.main(BPELProcess.java:89)
My Code :
locator = new Locator("default", "welcome1");
deliveryService = (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
String SchemaInputXML = "<soap:Envelope xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n" +
" <soap:Header/>\n" +
" <soap:Body xmlns:ns1=\"http://www.globalcompany.com/ns/sales\">\n" +
" <ns1:User>\n" +
" <ns1:FirstName>787878</ns1:FirstName>\n" +
" <ns1:LastName>ujfyytytry</ns1:LastName>\n" +
" </ns1:User>\n" +
" </soap:Body>\n" +
"</soap:Envelope>\n";
NormalizedMessage nm = new NormalizedMessage();
nm.addPart("payload", SchemaInputXML);
deliveryService.request("userBPEL", "initiate", nm); --> here exception appear
userBPEL is my Process Name
initiate is BPel method

Message was edited by:
Marc Kelderman

MOPZ - Error during call of SAP back end system

Hi Experts,
I have this error during MOPZ - "select OS/DB dependent files" and following option as well.
I have checked SAP NOTE 982045, but still cannot solve the issue.
SM59 - SAP-OSS and SAPOSS connection test is successful.
I have no idea what else is going wrong. kindly advise id you have any idea.
Below are some error logs.
From MOPZ
Error calling SAP back-end system: Local gateway not running / CPIC-CALL: 'ThSAPCMRCV'SAP-OSS via RFC destination.
From SM21
Call of function GwRead failed, RC: -095
Communication error, CPIC return code 017, SAP return code 24
> Conversation ID: 13681187
> CPI-C function: CMRCV
From dev_rfc8
**** Trace file opened at 20140904 134347 Malay Peninsula Standard Time, by disp+work
**** Versions SAP-REL 721,0,300 RFC-VER U 3 1498740 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=247
Local gateway not running
ABAP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: )
Called function module: /SPN/SBI_INTERFACE
User: BT_BASIS (Client: 100)
Destination: SAP-OSS (Handle: 4, DtConId: 22F633E42CC0F1D280C9A0D3C1069543, DtConCnt: 1, ConvId: 12214252,{22F633E4-2CC0-F1D2-80C9-A0D3C1069543})
EPP RootContextId: A0D3C10695431ED48CFEB45C956820C9, ConnectionId: D3F533E43BF2F12C80C9A0D3C1069543, ConnectionCnt: 1
EPP TransactionId: D3F533E43BF2F12A80C9A0D3C1069543
SERVER> RFC Server Session (handle: 1, 18243574, {D3F533E4-3BF2-F12C-80C9-A0D3C1069543})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: CL_MO_SMP_ADAPTER=============CP)
SERVER> Called function module: AGS_MOPZ_SMP_RFC
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3712
CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=247
Local gateway not running
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1973
Thank you.
Por.

Hi
there are following things you can do
1. log on to your SAP Router
2. check entries in SAPRoutab.
3. Telnet SAPSERV2 (Sap responding server) (Tcode oss1 will give you details of which SAP serve you are connecting ) on port 3299
4. if you are able to telnet SAPserve from your Router server then raise the call to SAP and ask whether they can reach your saprouter or not
5. check /etc/services files and check for service 3299 defined or not
6. telnet local Router server with port 3299
7 try to download Sap Note from SNOTE in you solman system.
all the best
Regards
Dishant.

Broadband perfect but phone shows line cord error

Have bt6500 for 3 months has worked great, now showing line cord error, we cannot phone out, only crackling on line. BT say line is ok, have tried unplugging phone and also the hub but no joy so far. people phoning us, say the phone rings out, but dosen't go to answer phone. Help and advice please as BT are only interested in charging you.
Solved!
Go to Solution.

I had a similar problem 10 weeks ago. I have been with BT from their GPO origins.The engineer found that the wiring was wrongly installed, the first junction box into the house was the original GPO .Bakelite junction box with both the master socket and the extension socket wired from that by the GPO. Owing .to this wiring arrangement the engineer claimed that it was NOT possible to test the wiring from the master as recommended in B T 's various help websites and in the front pages of the BT phone book. He identified that there was an earthing fault to extension box, to which the BT supplied router was connected. We disconnected the router from the electric socket and phone junction box and let it "rest" for about 2 minutes. Reconnected it and let it reboot and the phone returned to normal. Off he went and six weeks later I got my statement with £130 added for his visit.
My advice is check your wiring inside your house ensure that the master socket is the first connection on the wiring into it, if it is and B T say your line is clear, then from my experience I would ensure that the router was disconnected from the phone socket and the electrical supply and left for at least 5 minutes, then reconnect it, if the fault is still apparent then try another phone ideally an older bog standard type, without all the latest gizmos. If the fault is still there you have no choice but to call an engineer. Before the engineer arrives I would, unplug the router and physically remove to another place so that It cannot be associated with the fault. If you have an older type of phone I would just have that connected and disconnect the newer phone arrangement and physically remove it also so it cannot be associated with the fault. When the engineer clears the line reconnect in the router and phone before he leaves and ensure that they are working.
Hopefully you will not be charged £130 but you will only know that when your next bill arrives.

E50 in USA - Phone Start-up Failed error

Hey all,
I'm in the US, and I've had my E50 for a couple years now. Well, my phone randomly crapped. It wouldn't turn back on (battery had some juice left), so I pulled the battery out and let it sit for about 20 min. It booted back up only to display the "Phone start-up failed. Contact the retailer." error.
So, what are my options here? I have contacts that I don't want to lose, but I can't get to the dialer to do a soft reset. Is there any other way to do a soft reset? I tried to even do a hard reset (i know i'll lose everything) using the 3+*+GREEN CALL button combo to go to the format screen, but it does nothing.
I also tried to get the phone to connect using PC Suite, but the computer/app don't find the phone.
Anyways, in the US, there are no care centers that support the E50, as it never hit the market here. What are my options here? How can I even get this to a Nokia repair center?
Really sucks because I've been waiting for the N97 to come out :-\ I haven't backed up my contacts in a year, and I would love to NOT lose these. Is there any way to pull these contacts off the phone without actually getting on it??? They were saved to internal memory :-\
Thanks,
TJ

lylalue8 wrote:
How do I connect it to a TV to view my videos using the HDMI cable?
What is the issue here, although you do need to press plugs in firmly?
Np clues as to what region you are using device although somne users may have to change PAL to NTSC in Settings > Phone > Accessories > Tv-out.
Happy to have helped forum with a Support Ratio = 42.5

I purchased new iPhone 5 but phone shows cellular usage for lifetime calls 5 days 11 hours. How can this be?

I purchased a new iPhone 5 and it shows 5 days 11 hours of cellular lifetime call time. I suspect someone had used this phone prior to selling it. Can someone tell me if I am correct. Shouldn't it show only the time that I have logged in calls since purchasing it?

I synced it with my iTunes account if that is how you restore from a backup. But my old phone shows 7 days and 2 hours call time and my new phone shows 5 days 11 hours.

N8 Phone start up failed error message

hi geniuses of N8 users. May i ask why my N8 is always showing"Phone start-up failed. Contact retailer." everytime it's low on battery. I need to shut it off and on plenty of times and pray that it wont be in the screen. What to do?
And, how do i connect it to a TV to view my videos using the HDMI cable?
Thanks a bunch! Really appreciate it.
Moderators notes: Thread heading amended to reflect the nature of the post.

lylalue8 wrote:
How do I connect it to a TV to view my videos using the HDMI cable?
What is the issue here, although you do need to press plugs in firmly?
Np clues as to what region you are using device although somne users may have to change PAL to NTSC in Settings > Phone > Accessories > Tv-out.
Happy to have helped forum with a Support Ratio = 42.5

HT201401 Phone doesn't go blank during call - ear/face dialing during call

Help! My Iphone4 doesn't go blank during calls, resulting in ear/face dialing. I've had this problem since I took it out of the box. Anyone out there with this problem that was able to resolve it?

There is a proximity sensor near the front receiver/speaker on the front of the phone the is supposed to sense when you have raised your phone to your face during a call and turn off the screen. Your symptoms indicate there is something wrong with the proximity sensor on your phone. Try cleaning or removing your screen protector to be sure that isn't the culprit. If it isn't, make an appointment with the genius bar at a nearby Apple store to have it looked at. (If you feel it was related to iOS 6, you could try restoring your phone first to see if that would help.)

CJS-30196 Connect to SAP gateway failed: Error during installation

Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'node1:sapgw03' not reached
TIME        Tue Aug 04 08:28:43 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh Bhatia

Hi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR       partner
'ecc6:sapgw04' not reachedTIME        Tue Jan 24 06:58:02
2012RELEASE     700COMPONENT   NI (network interface)VERSION
38RC          -10MODULE      nixxi.cppLINE        2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak

E63 - Connection Error during calls AND trying to ...

Hi,
Wonder if anyone has had this problem. A while ago I noticed that if I used say google and then went onto a website, it'd try go go into the website then knock me back to google. A while after that during phone calls I'd be chatting away but the line would suddenly go dead and a message would say "connection error". This may be after 8 or so minutes, but sometimes after only a minute or two.
I've tried turning off, taking out battery and SIM and turning back on and today went to the Three Store where I got it and we tried a new SIM card. But it's still happening.
Is this a problem anyone can help with please or does it sound like there's a problem with my phone? Three have said if the new SIM didn't work they'd send it off to Nokia who won't charge if there is a problem with the actual handset but if they can't find a problem they'll charge me! Does this sound like a handset problem does anyone think?
I'd be REALLY grateful for any advice as it's driving me mad!!
Thanks in advance.
Becky

Go to Tool>> Settings>> Phone>>Network
Pick GMS.
That should fix your problem. I was stuck in that Connection Error thing for days. Took it to the Nokia Care Center but all they did for the fee I paid was to update the firmware (which I could do at home myself). I was searching everywhere for a solution and among all the advice to reset or firmware install or turn on and of and take out SIM/battery, etc., That GMS thing really works.
Hope it helps

Error during call sqlldr - ODI version 11.1.1.3 and java 1.6.0_30

Hey All,
I have scroll thru forums for resolution of similar issue but no luck. Here is the problem this is working fine in ODI version 11.1.1.5, Except the file is mapped to local drive.
Now below is the error message from ODI 11.1.1.3, Trying to use LKM File to Oracle(SQLLDR) and here is the error
ODI-1226: Step LD_PARTNER_USING_SQLLDR fails after 1 attempt(s).
ODI-1240: Flow LD_PARTNER_USING_SQLLDR fails while performing a Loading operation. This flow loads target table DRM_USER_PARTNER_NEW.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 33, in ?
Load Error: See \\Cdpwa01a0600\e$\Hyperion\DRM\Loadfile/LD_USER_PARTNER.log for details
here is the generated code from call sqlldr session task
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
def reportnbrows():
     f = open(r"\\Cdpwa01a0600\e$\Hyperion\DRM\Loadfile/LD_USER_PARTNER.log", 'r')
     try:
          for line in f.readlines():
               if line.find("MAXIMUM ERROR COUNT EXCEEDED")>=0 :
                    raise "MAXIMUM ERROR COUNT EXCEEDED", "See %s for details" % logfile
     finally:
          f.close()
ctlfile = r"""\\Cdpwa01a0600\e$\Hyperion\DRM\Loadfile/LD_USER_PARTNER.ctl"""
logfile = r"""\\Cdpwa01a0600\e$\Hyperion\DRM\Loadfile/LD_USER_PARTNER.log"""
outfile = r"""\\Cdpwa01a0600\e$\Hyperion\DRM\Loadfile/LD_USER_PARTNER.out"""
oracle_sid=''
if len('d1odi1')>0: oracle_sid = '@'+'d1odi1'
loadcmd = r"""D:\Oracle\product\11.2.0\client_1\bin\sqlldr 'MDM_STAGE/<@=snpRef.getInfo("DEST_PASS") @>%s' control='%s' log='%s' > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
rc = os.system(loadcmd)
if rc <> 0 and rc <> 2:
raise "Load Error", "See %s for details" % logfile
if rc==2:
reportnbrows()
what am i missing?
Thanks.
Shri.

thanks for you reply.. this is what i have hardcoded in the KM for testing purpose. gives me back the error
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 13, in ?
Load Error, error in the sqlldr step
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
ospath=(r'D:\Oracle\product\11.2.0\client_1\bin\sqlldr control=e:\Hyperion\DRM\Loadfile\LD_USER_PARTNER.ctl log=e:\Hyperion\DRM\Loadfile\LD_USER_PARTNER.log userid=mdm_stage/xxxxxx@d1odi1')
rc=os.system(ospath)
if rc <> 0 and rc <> 2:
raise "Load Error, error in the sqlldr step"
Thanks.

RFC Error during call from IBM WebSphere adapter to SAP R/3

We recently saw an issue arise on on one of our RFC interfaces. We dropped 15 messages onto the request queue of the BAPI adapter, 11 processed successfully, and 4 failed with the following statement:
[Thread: EAI.SAP_BAPIJmsThreadPool.thread5 (#1670071)] [Type: Error] [MsgID: 27064] [Mesg: Error: Function module Z_BAPI_ZPTRAC_UPDATE could not be found. Check the SAP system or the business object ASI.]
I replayed the 4 in question and they processed successfuly. I then dropped them on the request queue in our VAL environment and had 2 failures. I replayed the same 15 a second and third time and all 15 were successful in those cases.
Has anyone seen this before? We are configured to allow 1 concurrent connection and to log into the db server directly.
Thanks.

So we tested some things that are described in the SDN or by SAP with Connectors.
We tested JCO version 2.0.12, 2.1.18 and 3.0 in J2EE Projects in netweaver and in Eclipse (Standalone).
For version 2.0.12 there is a failure that this version is not compatible with the other things in netweaver.
This version is for standalone and integrated sytems.
For version 2.1.18 is only described as standalone and so failure happened in netweaver that other classes are coruppted or missed. The internal test in "content administrator" (Ping and Test) do not work and had the same error.
For version 3.0 (that displace the other two versions) there is many to do in settings and coding that we do not have tested yet because project is not that small to write it for JCO 3.0 only for testing. When we only displaced files in netweaver the server do not start any more.
So:
Is there a way to call R/3 from session bean and 1. create an JCO client or 2. add a client to the "standard" pool of netweaver to use it?
Any ideas? help? links?
Project have to be complete in september...
Our combi is SAP Netweaver 2004 SP21 on Windows XP SP2 / Server 2003 Standard SP1 with JVM 1.4.2_16... need of any more info?
thx

Phone show " Temp Fail " error during call

Similar Messages

Maybe you are looking for