Phone thinks headphones are always in?

I've been having this problem with my iphone where it thinks I have headphones plugged in, but I don't.
I haven't been able to narrow down an exact pattern, but I tend to use my iphone as an ipod frequently.
It's also difficult to get the phone to realize the headphones aren't there. Sometimes I need to put the headphones in, and take them out. Sometimes I need to put them in, play a song and take them out. The rest of the time I'll have to power cycle the phone.
I keep missing calls! Please Help!!!

If it is determined at the Store that your iPhone needs to be exchanged under warranty, and the particular store has a new or refurbished iPhone in stock, it will be exchanged on site. If not and your iPhone must be sent to AppleCare for the exchange, or the store to received more stock to make the exchange, the Store should have an loaner iPhone available for your to use in the interim. You can use a loaner iPhone with your iPhone's SIM card right away, but you must sync this iPhone with iTunes on your computer to transfer your iPhone settings and data to this iPhone.
If you were an at&t subscriber prior to getting an iPhone and you still have your old at&t phone, you can use your iPhone's SIM card with this phone temporarily.
So the the short answer is, you shouldn't be without a phone one way or the other regardless.

Similar Messages

  • Phone thinks headphones are plugged in

    My LG Revolution is convinced that it has headphones plugged in - the little headphone icon is displaying.  If I plug in headphones, I hear sound, but otherwise, I don't.  Plugging in and removing headphones doesn't fix the problem, nor does turning off the phone, removing the battery, then putting the battery back in and turning the phone back on.
    Any idea how I can convince the phone that there are no headphones plugged in?

    Check and make sure there isnt any thing in the port, this is a common issue and usually a user learns that something has fell into the port from being carried in the pocket or coat...   Users has reported resolving the issue with clearing the port by blowing into the port and then pluggin in the headset and then slowly remove the headset.
    Try this...  Hope it helps.

  • Itouch thinks headphones are connected when they aren't

    My itouch (2nd gen)connects well to headphones, but when I remove the headphones it thinks they are still connected. I've tried restarting, resetting, and restoring already. The volume control buttons work, but come up saying there are headphones in when there aren't. The headphone jack is clean too. Anyone have any ideas???

    I have the same problem. Have tried inserting removing headphones multiple times, looking for debris, the water damage indicator is still white, reboot, restore, etc. Still the iPod thinks that the headphones are always attached when they are not.
    This is very frustrating, as it seems many are having this same issue. My iPod Touch is just a little over a year old, and I have taken care of it. It's disappointing that the answer seems to be bad hardware on Apples part.

  • IPhone assumes headphones are always connected even if they don't

    I've got a big problem with my iPhone. It started assuming that the headphones are always connected, which means that if they are not connected I cannot listen to music, or make calls, as the sound would not be played through the normal speakers.
    I have looked at the port for headphones- nothing has stuck in there for the phone to assume that those are my headphones.
    Any suggestions on how to solve this?
    P.S. Speakers work fine as the alarm functions OK. It is just that the iPhone assumes that headphones are connected...

    There is a physical switch, and that might be deformed such that it never can tell when the plug is removed from the jack.
    But it could just as well be a software setting that this physical switch interacts with.
    You could CAREFULLY poke around in there with a plastic toothpic to see if you can trigger that switch to close
    or you can take it in to the Apple store.

  • IPhone thinks headphones are still in

    after the first time i worked out after the update, i unplugged my headphones and the phone wouldn't have sound and i kept messing with it and it thinks my headphones r still in! i toggled some switches, changed some settings back and forth and it worked. then it started doing it again...very annoying and sometimes the text sound won't finish all the way. sometimes it'll stop playing my ipod for no reason?

    You need to plug and unplug your headphones about 8 times....to see if that fixes the issue. I have heard of that happening to others....where the iPhone still thinks the headphones are still in and this fixes it for them.
    Message was edited by: BlingMe

  • X201 thinks headphones are plugged in

    Hi folks, I have a Thinkpad X201 (3249CTO) running Windows 7. All was well until yesterday when my laptop suddenly shut down. When I turned it back on, the internal speakers no longer work. I only get sound if I plug in my headphones. I updated all the audio drivers, disabled/enabled them in the Device Manager, and when I go into SmartAudio I'm able to get the internal speakers to make noise so I know the speakers haven't gone out. When I look in Sound in the Control Panel, I only see Speakers as my only playback device, but I seem to recall there used to be another option called Headphones or something. Nothing else is listed there even with "Show Disabled Devices" selected.
    I'm just super confused as to what's going on and what I should do. I think either the headphone jack has stopped working or the sudden restart has changed some weird setting in my laptop to make it think the headphones are in all the time.
    Thanks in advance for any help!

    Hi
    Welcome to Lenovo community
    Please try the following
    1. Update the Bios to latest
    2. Update the Audio Drivers
    3. Update the Intel HD Graphics Drivers
    http://support.lenovo.com/en_US/research/hints-or-​tips/detail.page?&LegacyDocID=MIGR-70656
    Hope This Helps
    Cheers!!!

  • No audio thinks headphones are plugged in

    I have no audio.  WHen I increase the volume I get a display that says headphones. 

    The iPhone believes the headphones are still plugged in. Check to see if there is any debris in the headphone jack. Don't use air to blow down into the headphone jack, as that can cause dirt and debris to be forced into the phone. Try inserting and removing the headphones a couple of times and see if that helps.

  • HT5858 iPhone thinks headphones are connected

    My iphone 4S with iOS 7.0.2 won't put any sound to the speakers because it thinks there are a headphones connected.  I have some bluetooth headphones, but I have bluetooth disabled.  Any ideas?

    Hi jeberhardt,
    Thanks for visiting Apple Support Communities.
    I recommend trying these steps if the iPhone incorrectly registers that headphones are plugged in:
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    These steps come from the related troubleshooting article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best Regards,
    Jeremy

  • Macbook thinks headphones are still in

    how do i convince my macbook, that the headphones are not in there. i have tryed shutting down with headphones in/ out restarting removing them slowly fast.  i notice the whole where they plug in is lit up red.  please help.
    thanks

    Sounds like your headphone jack is damaged... try plug in/out your earphones a few times.
    If this does not fix this slack joint, well... the headphone jack is connected to your macbook's logic-baord, when it's within warrenty you can bring it to an apple service provider, who will probably replace your logic-board :-/

  • Updated ios6 and now no sound / Thinks headphones are in!!

    Hi
    I have an ipad 3 32gb wifi that i only bought last week... Everything is fine and loved it but updated it yesterday with ios6... at first it was fine but after a couple of hours it randomly started thinking it had headphones plugged in (never even put headphones in since i got it) and it wont play sound unless i do put headphones in. ive tried system restore, putting some headphones in and out the jack but nothing.. I played tetris for a few minutes and suddenly there was one second of sound, before it disappeared again!!!
    Does anyone else have the same issue?? and if so how do i resolve??
    Thanks

    Same problem here. I have unpluged and restarted, but no sound from optical.

  • IPad 2 thinks headphones are plugged in

    Yep, this problem again. Resetting doesn't work, neither does plugging head phones in and out over and over again. I've blown it out with compressed air, and I've shoved q-tips and paper clips in there. The iPad just seems to randomly decide that I have plugged my headphones in, then changes its mind and decides I have pulled them out. I really regret not getting a windows tablet.
    What might be helpful (since this keeps happening to people because you've obviously sold them a substandard product) would be to include in one of your seemingly weekly updates an option that allows us to turn off the headphones so that it doesn't recognize them whether they're plugged in or not. That's the only surefire method I can imagine. I can't see myself buying another apple product if this is sorted out somehow.

    I got water in the headphone jack and the ipad wouldn't play sound.  I tried using headphones inserted and removed to trick the ipad and it didn't work. I couldn't find anything fine enough to clean out the jack.  I tried resetting the general settings but it kept saying headphones instead of volume.
    What worked was leaving it upside down, headphone jack down in a bowl of rice overnight so it would absorb any moisture.  That worked! 
    If you can't get it working, best to head into an Apple store and they will clean out the headjack port with blast of air to remove any dirt/ dust.

  • IPad thinks headphones are plugged in

    Any ideas?

    I got water in the headphone jack and the ipad wouldn't play sound.  I tried using headphones inserted and removed to trick the ipad and it didn't work. I couldn't find anything fine enough to clean out the jack.  I tried resetting the general settings but it kept saying headphones instead of volume.
    What worked was leaving it upside down, headphone jack down in a bowl of rice overnight so it would absorb any moisture.  That worked! 
    If you can't get it working, best to head into an Apple store and they will clean out the headjack port with blast of air to remove any dirt/ dust.

  • TS4006 My one device says 'offline' but we are always on internet....i am confused!

    I have 2 iphone 5's and 2 iphone 4s's and an ipad and i of each phone and ipad are always "locatable" but the one iphone 4s and iphone 5 always says offline but i know they are not as they are used for internet all the time...what are we missing???

    On the devices that are offline, try turn Find My iPhone off, then after a minute or so turn it back on.

  • My 3gs has stopped playing through the speakers and when the headphones are plugged in only plays through one ear? it still ring when called and everything else seems fine, whats the problem? it seems like the phone thinks the earphones are always in?

    my 3gs has stopped playing music through the speakers, they play with headphones but only through one ear. It seems the phone thinks the headphones are in all the time. The ringer still works when called and i have cleaned the headphone socket the best i can without damaging the phone! Any ideas?

    I had the same issue, 4s running ios8, but the plugging and unplugging the headphones did not work, BUT, when I tried plugging and unplugging from the DOCK, it started to work again. There must have been a short in the power plug, not the headphones. I also blew out the bottom power plug with computer safe airjet. Hope this one helps anyone else having the issue.

  • My phone thinks the headphones are plugged in and I can't get any sounds.  How to fix?

    My iphone 5 thinks that the headphones are plugged in and they are not.  I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones.  Any ideas on how to fix?

    I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.

Maybe you are looking for

  • Error message ''Disk Full' when trying to export with CS6, works fine in 5.5

    I get an error message when I try to export media in Premiere CS6 that I don't have in CS5.5 I use export media for a AVCHD 60fps sequence with a few photoshop images on top of the main track. In the export settings I choose ''match sequence settings

  • Return/exchange an ipad

    Hi guys, just bought new ipad 64Gb without cellular, cause they didn't have the one with cellular at the time. But I need  ipad with cellular, is it possible to return  it, get cash back and buy another one with cellular? Thank you.

  • Changing creation date on adobe acrobat 9

    I've got a folder full of old PDF files at work. They are all labeled DD-MM-YY to signify the date they were made but the pdf's were originally in Word format and when they were all converted to PDF's, they all took that day as their created date. I'

  • Learning Co-ordinate System - Problem

    Hi I created a sample project to epxlain my problem. There are two canvases in the main application. outerspace canvas and innerspace canvas. innerspace canvas has a visual component "mainBox" and there is also a visual component in outerspace canvas

  • JSP protected pages are "forbidden" when request passed with access URL

    Dear All, I am encountering a very strange problem. Let me know if you have any solution for this issue: Setup: 1. Dedicated OpenSSO idp (different domain) 2. Service Provider - contains a portal which in turn uses a webservice. Both the portal and w