Phone turned off.  No response when plugged in

Phone turned off.   No response even when plugged in

Try to reboot by holding both the power and home buttons until the apple logo appears, if the red slider appears ignore it.
If that does not work, it needs a visit to the Apple store genius bar for testing.

Similar Messages

  • How can I turn off battery charging when plugged in to power on a plane?

    Hi,
    is there an app that can turn off battery charging while plugged in?
    I regularly fly from Australia to Europe (22 hours on the plane!) but the power outlet usually stalls when draining too much power
    (e.g. 85 Watts for my Macbook Pro battery).
    Any solutions available?
    I used to just take out the battery, however, that  is not possible anymore on the Macbook Pro.
    Thanks for your help.
    Christoph

    But why turn off battery charging, makes no sense in this case. You either run off the battery or plug it in and run off the battery while it is charging.
    The power draw won't change appreciably.
    My bad power consumption will change
    It would seem the best strategy would be to get on with a fully charged battery plug in the laptop and let it trickle charge as you use it. Given the length of the flight this should give you the longest use with the minimum amount of draw from the seat outlet.

  • Phone turns off by itself/when i adjust the volume is switches to headphone

    two issues here
    first is that my phone just turns off on its own. happens 1-2 times a month. anyone else having this happen to them?
    second is when i adjust the volume up/down the phone switches to headphones when no headphones are plugged in.

    perform SMC reset
    SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    If the same contact Apple for appt. for full in shop diagnostic and possible repair.

  • 1st Gen. Macbook Pro Turns Off Suddenly, Even When Plugged In

    Help Me!
    My 1.83 Ghz Intel Core Duo shuts down without warning after I start it up. Sometimes it's 1 minute into the startup, sometimes its 10. But after installing snow leopard 10.6, it does this everytime without fail. My screen doesn't work, so I have it plugged it into an external monitor. When it's turned on and working, it functions perfectly. But all of a sudden, it will turn off. I copied the power information from the system profiler, which is pasted below. Any help on possible fixes would be great. Maybe some sort of MPU reset or something. Also, I tested the battery I'm currently using in another Macbook Pro of the same exact model, and it works fine. Help Me!
    Battery Information:
    Model Information:
    Manufacturer: SMP
    Device name: ASMB012
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 4176
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4764
    Health Information:
    Cycle count: 86
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 1227
    Voltage (mV): 12515
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 180
    Display Sleep Timer (Minutes): 0
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: No
    Current Power Source: Yes
    Display Sleep Uses Dim: No
    Battery Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 0
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: No
    Reduce Brightness: No
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    ID: 0x0100
    Wattage (W): 60
    Revision: 0x0000
    Family: 0x00ba
    Serial Number: 0x00031c59
    Charging: Yes

    WELCOME!http://i29.tinypic.com/2ef7yfn.gif!
    Check out the following KB Articles: http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC)
    http://docs.info.apple.com/article.html?artnum=2238 Resetting your Mac's PRAM and NVRAM
    http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display

  • I plugged in my ipad to charge and it keeps turning off and on when plugged in but wont turn on when not plugged in

    My ipad is not charging, when I plug it in to charge it blinks on and off continuously. Any solutions?

    See:
    http://support.apple.com/kb/ts1440
    Note that this article is a bit outdated, so if you are using a recent system running Mac OS X 10.7 or 10.8 (Lion or Mountain Lion), see the following article for help repairing the hard drive:
    http://pondini.org/OSX/DU6.html

  • My iphone 4 wont turn on unless its on charge, but i need ios 6 update? whilst its on charge it says i have to connect to itunes but the phone turns off before i have plugged it in the computer

    NEED HELP UPDATING
    MY PHONE WONT TURN ON ONLY WHILE IT ON CHARGE
    BUT I NEED IOS 6 UPDATE

    Hello, chloea_2012. 
    Thank you for using Apple Support Communities. 
    Here are a couple articles that will help troubleshoot this issue. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If you receive any error messages while updating your iOS device, this article provides some helpful troubleshooting steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Regards,
    Jason H. 

  • Why is my iphone 5 battery dying even with phone turned off ?

    Why is my iphone 5 battery dying even with phone turned off ? Even when my phone is fully charged and I turn it off when I turn it back on the battery is drained. Why ?

    Completely drained when turning the iPhone on after being off?
    All lithium-ion batteries lose some charge when the computer or device is powered off.
    If the battery is entirely depleted after the iPhone is powered off with a fully charged battery at the time, something is wrong - unless powered off for a number of weeks or months.

  • My phone turned off over night and will not turn back on even when plugged in, is there anything that I can do?

    My phone turned off over night and will not turn back on even when plugged in. Is there anything that I can do?

    If you've left the phone plugged in for at least a half-hour with no results, then try holding power and home buttons simultaneously to do a soft reset (settings) only. If that doesn't work, try seeing if iTunes will recognize the device and let the computer charge the device.

  • HT201401 My iphone 4s turned off properly but when I went to put it back the apple icon came on and then an image I have never seen before of a ubs pointiing towards the word itunes in a circle.  And the phone no longer goes beyond this message.  meltdown

    My phone started acting up and I noticed my text messages were not being sent.  So I turned my iphone off.  My iphone 4s turned off properly but when I went to put it back the apple icon came on and then an image I have never seen before of a UBS pointiing towards the word itunes in a circle.  And the phone no longer goes beyond this message.  I try to turn it off and on again and same message over and over.  If I hit the any button on the phone nothing happens. Does anyone know what this means or seen this itunes messaging ?  meltdown? Please help.

    Hello Raja,
    Thank you so much for your response.  I had these photos backed up on iCloud but, had I not, its good to have an alternate solution as the one you suggested.  Actually, I went to the Apple store today and yes, you are absolutely correct Restoring in iTunes will result in permanent loss of photos unless backed up somewhere such as iCloud or other solution.  Well, what they did was restore the phone in itunes ( I did not have iTunes downloaded to my computer which is why it did not work when I went to do it myself, I needed to go to the iTunes site and go to the download iTunes button because my windows based HP laptop does not come with itunes already downloaded).  This retoration process took a while and I was forced to upgrade to the latest 7.1 iOS software which I was not too happy about -sometimes you like the way things work now :-)  Anyhow, they said this restoration request happens as a result of a software update (which I was NOT in progress of an update or doing an update) or sometimes when you remove the power cable too quickly from the iphone (which I do not recall doing this either but...). Since I had backed up on iCloud all of the photos were downloaded back on my iphone 4s.  Best of all was that my phone was back up and runnning and there was NO CHARGE at the apple store for this service of restoring my phone.  Well, I just wanted to share the results and I appreciate all the responses and support I received.  Thank you kindly.

  • My phone turns off saying it needed to be plugged in and i plug it in and it says it has 27% and i already tried resetting it! Are they able to help me or am i out of luck ? I already got a different iphone because my very first one didnt work and

    My phone turns off saying it needed to be plugged in and i plug it in and it says it has 27% and i already tried resetting it! Are they able to help me or am i out of luck ? I already got a different iphone because my very first one didnt work and the second one is not working either.

    When you erased the disk did you select Mac OS Extended Journaled as the format option?

  • I was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time

    i was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time. Help?

    Sounds like a hardware failure.
    Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

  • My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on

    My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.

    Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
    Try Recovery Mode... http://support.apple.com/kb/HT1808

  • Ato restore my iPhone it turns off on me. I try to reboot it and it does the same hing. When I click on restore on the computer, the phone turns off in he middle of the file extraction. What do I do now?

    I cant seem to restore my iPhone it. I try to reboot it and it goes to a connect to iTunes screen. I connect the phone to the computer and when I click restore in iTunes, the phone turns off in he middle of the file extraction. What do I do now?

    Restore as a NEW device.  Don't use backup at all.  Your backup may have corrupt data causing the issue.

  • How do you reduce/turn off keypad sound when making a phone call

    How do you reduce/turn off keypad sound when making a phone call?

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • My iPhone 4 with IoS 7 keeps randomly turning off. Also, when I plug it into my charger it keeps losing service untill I unplug it. Please help!

    My iPhone 4 with IoS 7 keeps randomly turning off. Also, when I plug it into my charger it keeps losing service untill I unplug it. Please help!

    Take the device to Apple for evaluation.

Maybe you are looking for

  • JAVA API to add header and footer in MS Word

    Hi, please help me out, I am hanging with this concept. The problem is I need to add a headers in ms word file using java. I come to know that the API is support for this task is 1.apache POI 2.jacob I dont know which class file I need to use to do t

  • How do you use Keywords?

    I'm curious how you use Keywords. I started to go into my pictures today and add them. I went first to the first Event I had and looked for any pictures of my kids. I was going to make my Keywords pretty broad. If they were aged 0 - 5, then that was

  • How to handle Multiple Keyfigures in BPC

    Hi, My BW cube is Keyfigure based, have 0quantity and 0amount. BPC cube is Account based it just has only one keyfigure,however there is a way to post multiple keyfigures to BPC by using MVAL keyword. Not sure how I can use this. Can someone throw mo

  • Electronic bank statement with CTX payment advice

    Hi: I'm trying to figure out how I can process an electronic bank statement that contains the payment advice embedded as a CTX addendum. I'm finding info how to issue an ACH and add the CTX addendi. But how can I process it when that info comes back

  • How can we print the Stock Transfer Purchase Order

    Hi, How can we print the Stock Transfer Purchase Order?? Because from Transaction ME9L & ME9F, we can print simple PO's like NB, MPR etc..but Stock Transfer PO could not print. Plz guide, from where we can do it...