Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation. Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call. Is there a setting I am missing to keep this from happening or ... An alternative?
Any help would be appreciated

Hi.
The Bluetooth should not disconnect when your screen goes to sleep. Have you tried re-pairing the Bluetooth since the upgrade? Below I have provided you with the steps to pair the Bluetooth again. (Please make sure both devices are fully charged when doing so.)
Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu.
Tap Settings
Tap Wireless & Networks
Tap Bluetooth to turn on Bluetooth
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press and hold the Call Control Button until the light indicator flashes blue and red.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu
Tap Settings
Tap Wireless & Networks
Tap Bluetooth Settings
Place accessory in pairing mode, see accessory pairing instructions.
Tap Scan for Devices, device starts Searching.
Tap [Plantronics Bluetooth] to pair
Pairing Complete, touch home to exit.
If you still need assistance, please send me a Private Message and I will be happy to help you.
Thanks,

Similar Messages

Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

Xperia Z3 Compact - Phone turns off on its own after lolipop update

Dear Sony Team,
Background: My Xperia Z3 Phone is 5 months old. It worked perfectly fine until the Lolipop update (updated 3-4 weeks ago).
Issue: Phone Turns-off abruptly on its own and doesnt turn-on until several attempts of pressing the power button.
Few Observations:
1. No particular time that it turns-off. While on call, during charging, while browsing and so on.
2. I tired all the combinations of powering up the device mentioned in various threads.
3. I did removed the SD CARD, SIM CARD. But in vain.
4. Like someone mentioned in one of the thread suspecting some sort of application creating the issue, I did activated ultra stamina mode to restrict ot bare minimum applications. But In vain.
5. I did factory reset and updated the phone. But in vain.
All of the effrots are frutail.
Can Sony Team or the friends over this support forum suggest me what to do?
Thanks in advace,
Gopi Krishna
Solved!
Go to Solution.

@GopiKrsna
Try this.
Remove the SD and SIM cards > repair the phone with PCC > make sure that you delete everything > once you repair the phone > try to use the phone w/o any SIM nor SD cards for an hour or two > report back.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Wifi turns off when screen goes to sleep - how can i disable this?

running 10.8.4 on MBA 2013
is there a way to keep wifi alive when the screen goes to sleep (automatically turns off)?
this is very annoying that i would have some internet connected application running (eg. a download) and then the screen turns itself after a timer and also cuts the wifi. this means i have to keep my screen on if i had a big file to download. is there a way around this? i cannot find any settings addressing this issue/option.
thank you.

edit:
i know there's the option "prevent computer sleeping when screen is off" under power adpter, but i would like it done while running battery.
thank you.

My phone turns off on its own after ios 7.04 update (iphone 5)

PLEASE HELP!!!. It is almost an useless piece of technology now.

Hi there rags355,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

No blue tooth connection after ios upgrade

My Iphone 4s does not find any bluetooth devices after upgrading from ios6 to ios7.
I've tried reseting all configurations for network connections and all configurations in the phone without success.
What is the next step?

The iPhone has previously been paired with the device. But neither the iPhone or the connecting device (car stereo) detect the other device after this upgrade. I have removed all previously paired devices from the car stereo and other iPhones detect the car stereo.
It's like the iPhone bluetooth doesn't start at all.

My iphone 4 wont turn on unless its on charge, but i need ios 6 update? whilst its on charge it says i have to connect to itunes but the phone turns off before i have plugged it in the computer

NEED HELP UPDATING
MY PHONE WONT TURN ON ONLY WHILE IT ON CHARGE
BUT I NEED IOS 6 UPDATE

Hello, chloea_2012.
Thank you for using Apple Support Communities.
Here are a couple articles that will help troubleshoot this issue.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you receive any error messages while updating your iOS device, this article provides some helpful troubleshooting steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
Jason H.

During an update my Mac turned off and will no longer boot into the user interface.

The situation is that I don't have an os disk with me - traveling abroad - and would like to be able to create one using my PC.
- First is this possible?
- Second, will I lose my personal data upon system reinstall!
As far as the boot sequence goes is the apple logo and the spinning wheel...
Just thought of this, is there a "last good bootup" option available as an option or some other way to recover without reinstalling?
The situation was that I have a bad battery and the chord was accidentally unplugged... Pretty bummed at this point... :(
Thank you in advance!

So far I have tried to use the option, and a few other keys on startup, but no-go...
I found a snow leopard install .dmg file download on the apple site, since my MacBook is from 2005, but only have a PC to create the disk image from - if that will even work at all...
Will keep updating as I move forward... Any help is appreciated!

I tried to turn off my iphone4 and it just shows the scrolling circle screen has been for about half an hour

i tried holding the lock button...nothing
i tried holding the home button...nothing
i tried holding both together...nothing
ever since apple gave me a refurbished phone for warranty its been nothing but problems

Connect the iPhone to your computer, lauch iTunes. Right or control click the iPhone under Devices then click Restore but don't restore from a backup.
Restore as new.
How to set up your iPhone, iPad, or iPod touch as a new device

My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on

My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.

Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808

IPad won't turn off, returns to Connect to iTunes screen

My iPad constantly shows the Connect to iTunes screen. Okay, something's wrong, although I have no idea why . But I won't be near my computer for a few days. I'd like to turn off the iPad until I can, as it asks, Connect to iTunes. But the iPad2 with recently updated software won't turn off.
If I hold just the power button for 6 seconds, the screen goes black. Good, I think, it's turned off. Then 4 seconds later the Apple logo appears and then the iPad shows Connect to iTunes.
If I hold both the power and Home buttons for 10 seconds, the screen goes black and then immediately the Apple logo appears and returns to Connect to iTunes.
How can I get the iPad to turn off and stop burning that image into the screen? Do I just wait for the battery to die?

Got the same problem with my Ipad2. Went do to the update late last night and it seems like the update quit half-way through the install.
Now all i get is the screen telling me to plug in the USB cable and connect to itunes.

My phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz repl wats the prblm wid it

my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it

Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy

After recent update to airport on iMac, the wifi connection is lost when it goes to sleep and requires turning off wifi and turning it on to reestablish contact.

After recent update to OS on iMac, communication to airport is lost when computer goes to sleep. To reestablish connection, I need to turn wifi off then on.

same problem here.
i have a time capsule.
symptoms:
excessively searching for network
but more often than not, it cant find the correct netowrk that is correctly stored in keychain
if i try network assistant opened through safari not finding its page, then it can find the right network after i enter in the password again. it connects. but only for a few seconds then it loses the connection again.
the only fool proof workaround for me is:
1/ shut down time capsule. restart time capsule.
2/ restart mac with airport turned off.
3/ after restart manually select the network from the wireless icon in the menu bar
airport utility is a complete waste of time
old airport utility is still better.

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say.

IPhone 4 Refurbished broke after 40 days! My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode! It becomes very stubborn to get out and also extremely annoying! Need a permant fix!!

My problem is that I cannot let me phone turn off or sleep too long without it going into recovery mode! It becomes very stubborn to get out and also extremely annoying! Need a permant fix!!
No warranty left -_-

Guitargirlcaz wrote:
I've checked with Apple. They only give 28Days warranty now :'(
Whoever told you that is wrong. The warranty on a repair or replacement iPhone is still 90 days minimum. Quoting from their Service FAQ:
If defects arise as a result of service, Apple will cover the repair for the remaining term of the iPhone's warranty or 90 days after iPhone service, whichever provides longer coverage for you.
Call Apple Support and discuss your problem with them. If they agree that it's a hardware problem, they can arrange for mail-in service.
Regards.

Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

Similar Messages

Maybe you are looking for