Phone unable to charge/connect to Charger/Computer.

I was charging my phone to 100% with my charger and I needed to connect to the computer to transfer things inside. However after plugging into the computer, the phone did not charge and did not show up in the computer. I tried the same with my charger and the same happened. I restarted my phone twice and rebooted once to check if it solved the problem. Help, i need to transfer things in!

try again, and if it still does not work, leave it for 24 hours and then try again, sometimes you have to leave this phone alone if it does not turn on (no matter what you do) it wont turn on, I know because ive had the same problem, leave it for a good day and night and you may find it magically working the next day, i know it sounds cr@zy but it works

Similar Messages

Unable to remain connected to a computer!

I cannot stay connected to the internet from my desktop. Spoken with 3-4 Verizon people who tell me each a different thing, and nothing works. spoke with a level 2 yesterday for 11/2 hours, who said it was corrected, and before I could log on it was disconnected. I am able to reconnect but this is only temporary. Have taken my tower to 2 different compute people who are unable to find any problem with the computer. I have No difficulty in using my cell and connecting to Wi-Fi. Please help I am at my wits end.

If your computers WiFi connection to the Jetpack is breaking then perhaps you need to purchase a different wireless adapter. You can pick up a USB wireless adapter for pretty cheap these days and test the theory out. Return it if it doesn't improve your results.
Another suggestion would be to modify the wireless signal broadcasting from your Jetpack. For example, you could modify the wireless channel, or wireless mode to find one that more available.
Jetpacks also have a feature called Automatic Shutdown which kicks in to power the device down after a certain amount of inactivity is detected. You can locate the Automatic Shutdown feature from the Jetpacks admin webpage and disable or raise the limit.
In more rare situations the DHCP/Dynamic IP address of your computer may be getting accidentally taken by another device due to inactivity. You could experiment with Static IP Addresses to rule out that kind of a problem.
Let us know if you need more suggestions. It would be nice if you could enable logging on your device, capture a disconnect and post the log for us to review. That might help us isolate what is going on a little better.

I need to update my iPhone 4 to the iOS 4.3. but I have only ever connected my iPhone to my friends comp when I first set up my phone. Can I connect to my computer at work without losing all of my data? And how do I do all of this? Please help!!!

Thanks in advance for your help!

See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Unknown MTP error (0x8004c03e) when connecting pTunes to computer

I recently purchased a Palm centro and began using pTunes with no problem. I bought some headphones for the phone and when I used them, they blew out the speakers. I had to get a new phone and I took my memory card out of the damaged phone and put it in the new phone. For some reason, none of the music is still on the card. This is not a major problem, I thought. I went to sync all the music onto the new phone, but as soon as I plug into the phone (so it is connected to the computer) and pull up pTunes, it says "Communicating" and then comes up with this: "Unknown MTP error (0x8004c03e)". I pulled up Media Player on the computer and it recognized the phone. I clicked the button to sync the music to see if it would work anyway and it starts to sync and then says error for every song. Please help! I gave this long description cause I know sometimes with these kinds of problems the more information I can give the better.
Post relates to: Centro (Verizon)

I found this article on the Pocket tunes website. See if it may help with your issue.
http://www.normsoft.com/kb/idx/49/161/article/
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=verizon
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find on the internet but nothing is working. Any other suggestions?

When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?

If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only.

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

My iphone4 when connected to any computer will not charge and is constantly connected and disconnected. does the same with itunes. Also i'm talking on the phone and all of a sudden the other person can not hear me.

My iphone4 when connected to any computer will not charge and is constantly connecting and disconnecting. It does the same with itunes so it doesnt really sync. Also when talking to someone, all of a sudden they cant hear me.

I'm having the same issue. I went to my local apple store and they could not work me into the genius bar so i made an appointment for tomorrow morning. The clerk did check the phone for the pink indicators at the top and bottom of the phone (where you plug in your USB or headphones) He said if you can see a pink indicator dot you may have gotten it wet, or had some sort of condensation in it, which could cause the plugs to not work.
In regards to people not being able to hear you, i'm waiting for my appointment tomorrow for more news! I would recommend taking it into your local apple store for more answers.

Loose connection - unable to charge phone

I plug my phone in to charge and the connection is loose. I am unable to charge my phone at all now. I have tried 4 different charging cords. These charging cords will charge my kindle but do not charge my phone, thus the connection to the phone must be at fault. How does this get fixed? I just got the phone maybe 6 months ago.

The reason I suggested a Motorola OEM: Breezex is that i have a few in my collection and with having that option it allows me to use different one's at different times and if you look closely on the end on the micro USB some have no ribs to make the connection tighter and then some have this and it makes for more of a snug fit in the case of the Op's phone a Motorola charger with these extra ribs might just he or she need's here is a picture to show these ribs..
This is a picture I took to show the Extra Ribs fingers on my Motorola micro usb.. to help ensure a tighter fit when connected to the Device to see it closer tap on the Picture.. and yes that is my fingers holding it in place..

I dropped my phone in water and put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes

And then put in rice for 3 days and plugged it into my computer but it keeps flashing the Apple logo and a no charge sign. It also is not connecting to my computer and it does not say "Amelia's iPhone" in iTunes

Put it in rice for another 4 days.

Travel Charger unable to charge phone

Hello
I got a Duracell travel charger for my birthday, to use when im out and about and unable to charge the conventinal way. I went to charge my phone with it last night (plugged USB into travel charger and micro USB into phone) and it is telling me that the power source cannot charge my phone, please ensure that your computer is not in hibernation mode, i do believe its telling me that the charger is to weak to to charge phone, im not sure what that should happen because the Duracell charger was fully charged and it's main job is to charge. I've got the latest everything, including latest OS
Here is the charger: http://www.duracell.com/en-US/product/instant-usb-charger.jspx
and it clearly says it can charge BlackBerry phones
Is there anyway to fix this?
EDIT: I've been using the BlackBerry USB cable which it didnt like, and just used the Duracell USB charger (which tbh are exactly the same) and it works, so i think it only likes the duracell USB cable, no reason why tbh

The charging source connected to your Blackberry device cannot charge your battery
http://www.youtube.com/watch?v=02DLQLxGDCM

My iphone 4s will not connect to the computer or charge when on

Ok, so this one is kind of strange. I've had this problem for about a 10 days, and it's driving me nuts. The gist of it is that when I connect the USB cable to the phone and to either the computer or the electricity plug, nothing will happen. The phone will not charge in either, and when connected to the computer, neither iphoto nor itunes will connect to the phone (so no syncing podcasts or photos, grrr).
For a while I thought that it was a hardware problem- it started first by not recognizing the electricity plug, and i could only charge it with the computer (i think since i upgraded it to iOS6 first, about a month and a half ago). At that time, itunes and iphoto were working, so i didn't mind. Then, it started to get picky and i had to plug it a dozen times before it would work. I was very afraid that I wouldn't be able to charge my phone at all- but I discovered that if the phone was turned off while plugged, then it would charge perfectly. If I plugged it in while it was turned off, it would start up and not charge nor connect to itunes / iphoto- so the phone is getting the charge and it knows when it's being connected, but only as long as it's in a coma .
Here are the specs of what I'm using:
iphone 4s
iOS 6, latest version as of today
Macbook 4.1 Intel Core 2 Duo 2,4 GHz
running OSX 10.6.8
and iTunes 10.7 (21)
And here's a bunch of things I've tried:
- different cables
- different computers (macbook pro running 10.8.1)
- push start + off buttons simultaneoulsy for 30 seconds
- connect via wifi (since I need to start with the cable, it doesn't work)
Obviously nothing worked, and I would hate losing the pictures and videos in my phone that haven't been synced. Any ideas?

You must use Apples iTunes in order to place ringtones or music of your own on the phone. You don't have an android phone which uses a sd card and can load via the usb cable.
If you need info on how to get songs and ringtones and photos on your phone read the manual on your phone or read up at http://www.apple.com

My BlackBerry PlayBook won't charge when connected to the computer via the micro-USB to USB cable

Can anybody help me? I don't know why but lately, when I try to plug my BlackBerry PlayBook into my Windows 7 laptop using the micro-USB to USB cable, it connects to my computer without any problems but it won't charge. Instead, I get a notification in the top left corner saying "Unable to charge battery with connected sorce". I have four USB ports and I'm positive that they work just fine because I plugged in some of the USBs I own into each of those four ports and they recognized the USBs without any issues. Does anybody know how I can resolve this issue? Thanks.

The notification is by design and was added to clarify that USB charging is not to be relied upon as a main method of charging. Instead RIM's good intention has caused confusion.
USB (by design) can not provide the amount of power the device needs while it's being used. Technically, it is still trickle charging but the screen has to be off (and I'd turn off Wi-Fi too) since they are high power draining items. I have verified that the PlayBook does indeed still charge but it takes much, much longer than plugging it into a wall charger or rapid charger. In a crunch it will work but the computer has to be on the entire time. A full charge would take many hours.

Phone won't charge from computer

I changed some setting today that connecte my phone as a media device to my computer. This same setting also allowed me to charge my phone from a computer. I cannot find it to put it back. Anybody have any clues how to put it back? It is a setting on the phone, not the computer because now my phone will not charge from any computer.

This is weird, I plugged my phone in the first time, it started charging
from my computer, but my computer didn't acknowledge it, and there was
no notification bar to pull down. I used the same USB port that I
always use because it seems to charge the phone the fastest.
I wanted my computer to recognize the phone like it has always done in
the past prior to me changing whatever I changed on my phone. I
unplugged my phone, it showed that it had quit charging, then plugged it
back in to both ports on the phone and the computer. The phone did not
recognize that it was attached and start charging, and the computer
didn't recognize it either.
I unplugged my phone, and rebooted it. Then I plugged the phone back
in, and things were initially the way they were, the phone brought up
the notification bar, it showed as being connected as a media device.
My computer recognized it as well. So now it charges, but all that I
can do is to install the Motorola assist software. I have downloaded
and installed it repeatedly, but I still can't access my
pictures/music/etc. from my computer, the only thing that shows up is to
install the software which I've installed.
On Tue, Dec 16, 2014 at 11:27 AM, Verizon Wireless Customer Support

I'm unable to charge my ipad2 by connecting it to laptop or desktop

I bought a ipad 2 from US.Now i'm in India.I'm unable to charge it by connecting it to laptop or desktop

Unless you have a high-powered USB port on your computer then it won't charge (not quickly anyway) - from http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.

Phone unable to charge/connect to Charger/Computer.

Similar Messages

Maybe you are looking for