Phone usage counter and carriers counter don't match?

I have been pretty consistant about reseting my usage counter on my iphone on my billing day. And yesterday i got a notice saying i was at 65%. I checked my phone and only showed ~37mb of in and out usage but when i logged into att it says i'm at 160mb. For the most part the usage looks right but there are 3 occasions where its in the 65mb, 40mb and 25mb. Way above my usual 1-4mb usage per session. Customer service only had "well then upgrade your data plan" to say but i don't want to do that till i know whats wrong.
Is there anyone that can explain why they are so different and any way to get att to remove those 3 oddballs cause its seriously like day 4 of my billing cycle.
iphone 4
gsm 5.0.1
icloud over cellular syncing is off.

Think i figured it out. It appears to be a bug with icloud as the phone was not connected to wifi but the laptop it plugged into was. For some reason it then sync'd with icloud anyhow racking up my data. Just annoyed that this transfer was somehow not put into the counter.

Similar Messages

How to dynamically set Min count and Max Count values in Adobe Print Form?

How to set the Min Count and Max Count values dynamically in a Print Form?
The values when set should over ride the values set in Binding Tab.
This is all needed to print multiple Material Number labels on a single page - and the number of labels to be printed needs to be under user control - something like an Avery Address labels
Please advise.
Thanks,

Here is a work around that works for me and may not be an intelligent solution .
I kept the Min Count to 1 on the subform binding properties.
Per the number of labels required, I appended the same item to the internal table so many times and passed it to the label.
it works fine for my requirement.
However - leaving out the post for a while to see if this can be done at the form level via scripting.
Thanks,

List of tables count and Views count in schema wise

Hi All,
I want to get all tables count and views count in Schema wise, What is the query for that?
Thanks in Advance.

SELECT COUNT(*) FROM sys.tables t join sys.schemas s
on s.schema_id=t.schema_id
SELECT COUNT(*) FROM sys.views t join sys.schemas s
on s.schema_id=t.schema_id
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

ALV - Count and Sub Count

Hello,
I have an ALV Report.Could any one tell me the code for Count and Sub Count.
Example is belwo.
Number     Name     Type
1     af     A
2     werg     A
3     weg     A
          Subcount =3
4     t2423     B
5     24t2     B
          Subcount =2
6     24t2     C
7     2442422     C
8     fdghs     C
9     sghs     C
          Subcount =4
10     rghqwegtwq     D
          Subcount =1
          Total = 10
- Varun
Basic questions are not allowed. Please put some effort from your side, before turning to the forums for help. Use the existing tools (F1 Help, ABAPDOCU, Google, SAP Help, etc) first to resolve your issue. Thread locked
Edited by: kishan P on Aug 24, 2010 9:43 AM

Hello,
I have an ALV Report.Could any one tell me the code for Count and Sub Count.
Example is belwo.
Number     Name     Type
1     af     A
2     werg     A
3     weg     A
          Subcount =3
4     t2423     B
5     24t2     B
          Subcount =2
6     24t2     C
7     2442422     C
8     fdghs     C
9     sghs     C
          Subcount =4
10     rghqwegtwq     D
          Subcount =1
          Total = 10
- Varun
Basic questions are not allowed. Please put some effort from your side, before turning to the forums for help. Use the existing tools (F1 Help, ABAPDOCU, Google, SAP Help, etc) first to resolve your issue. Thread locked
Edited by: kishan P on Aug 24, 2010 9:43 AM

How to find the max session count and process count for a database

Hi All,
How to find the maximum session count and process count reached for a database over a period of 15 days?
DB version:11.2.0.2
OS:AIX

Thanks for the link.
The output of the below query that is given in the link shows the results for the last 10 or 12 days.. Is there a query which gives a result for the last 30 days?
col metric_unit for a30
set pagesize 100
Select trunc(end_time),max(maxval) as Maximum_Value,metric_unit
from dba_hist_sysmetric_summary
where metric_id in ( 2118,2119) group by trunc(end_time),metric_unit order by 1;

SCOM-Difference between Problem Count and Event Count in Application Failure Analysis Report

Dear All,
Could someone explain me clearly , the difference between Problem Count and
Event Count in Application Failure Analysis Report. Please help me in understanding What is meant be problem and event in the report .
Thanks in Advance.
Regards,
Rajesh Kumar C

Hello Rajesh,
The "problem" is the logically grouped set of the exception events which have the identical hash calculated over several fields as "Stack", "Source", "Failed Function" and so on... So, even if exceptions are different
in the other properties but hash matches over the considered properties - then all those exceptions go into the same "problem group".
So, event is an instance of the problem. One event contributes to one problem but one problem might have a huge event count if you have a repeating issue.
The logic is similar for the performance analysis report, only fields that go into the "problem" hash are different. e.g. "Stack" is not used in hash for perf events...
Dmitry Matveev

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Getting Sum, Count and Distinct Count of a file

Hi all this is a UNIX question.
I have a large flat file with millions of records.
col1|col2|col3
1|a|b
2|c|d
3|e|f
3|g|h
footer****
I am supposed to calculate the sum of col1 =9, count of col1 =4, and distinct count of col1 =c3
I would like it if you avoid external commands like AWK. Also, can we do the same by creating a function?
Please bear in mind that the file is huge
Thanks in advance

This sounds like homework for a shell class, but here goes. Save into a file, maybe "doit". Run it like this:
$ ./doit < data
<snip>
#!/bin/sh
got0=0
got1=0
got2=0
got3=0
got4=0
got5=0
got6=0
got7=0
got8=0
got9=0
sum=0
cnt=0
IFS='|'
while read c1 c2 c3 junk; do
# Sum and count
echo "c1=${c1}"
case "${c1}" in
[0-9] )
     sum=$(expr ${sum} + ${c1})
     cnt=$(expr ${cnt} + 1)
esac
# Distinct
case "${c1}" in
0 )     got0=1;;
1 )     got1=1;;
2 )     got2=1;;
3 )     got3=1;;
4 )     got4=1;;
5 )     got5=1;;
6 )     got6=1;;
7 )     got7=1;;
8 )     got8=1;;
9 )     got9=1;;
esac
done
echo "cnt=${cnt}"
echo "sum=${sum}"
echo "distinct="$(expr $got0 + $got1 + $got2 + $got3 + $got4 + $got5 + $got6 + $got7 + $got8 + $got9)
<snip>

How to reduce logical count and scan count for a select query

hi,
I have two tables one is master and other is history. i need to combine this two tables into one temporary table.
I am using the below query to create temp table.
Select * into temporders
from
(select * from orders
union
select * from ordershistory) b
where updateon= (select max(updateon)from (select updateon,name,units,subunits from orders
union
select updateon,name,units,subunits from ordershistory) a
where updateon <='11/08/2008 11:18 AM' and a.name=b.name and a.units=b.units and a.subunits=b.subunits group by name,units,subunits)
order by report,subunitsorder
the statistics for this query:
SQL Server parse and compile time:
CPU time = 47 ms, elapsed time = 62 ms.
Table 'Worktable'. Scan count 556, logical reads 1569, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
Table 'ORDERSHISTORY'. Scan count 116, logical reads 339, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
Table 'ORDERS'. Scan count 116, logical reads 285, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
SQL Server Execution Times:
CPU time = 32 ms, elapsed time = 63 ms.
(115 row(s) affected)
you see logical reads and scan count for worktable(temporary) is quite high.
So anyone can give a solution for reduce the scan count and logical reads.
NOTE: name,units, subunits,updateon columns have primarykey

SQL ServerAm i reading it properly? :(
This is Oracle Forum And not the SQL Server.
Regards.
Satyaki De.

Maximum record counts and property counts

Hello,
I am looking for the document/link that mentions maximum record counts and maximum property counts for each record.
let say there are 1.5million records and each record has 2000 properties. Not sure if it can be handled nicely.
Mdex version is 6.2.1 at this point. but can upgrade if higher version can handle more.
Thanks,

Jeremy is pretty much correct. There are no limitations except by performance.
Start with the Performance Tuning Guide - here is a link to the 6.4.1 document:
http://docs.oracle.com/cd/E41223_01/Mdex.641/pdf/PerfTuningGuide.pdf
For your questions, start with Chapter 5 and read how properties/dimensions affect performance and this will help drive how you architect your queries and pipeline configuration/index setup to be most efficient.

Word counts and character counts

Hi,
I'm using Pages '06. I would like to be able to count the number of words and characters in a paragraph in Pages. I know that if i go to the Document Inspector and click info, it gives me word and character counts for the entire document. Is there a way to do this for individual paragraphs?
Many thanks.
Joe.

After you install WordService (see link in Dennis' post), you can access several new services in the Pages menu. You may have to restart Pages &/or your Mac.
WordService & CalcService add their functions to any OS X program that has been programed to utilize Services. I've been using them since shortly after I got iWork '05.

Xlate count and connection count

Can a firewall show more XLATE created than CONNECTIONS?
Is that theoretically possible to have more XLATEs than the total number of connections?. the reason I am asking, that assuming a Cisco 5510 has have maximum 130,000 total connections, however xlate limit on an ASA is considered as UNLIMITED.
I am designing a large network having multiple CIsco ASAs deployed as multi context mode to cater various networks inside the organization. I want to create proper resources per class. So far Xlate count vs. connection count is not very clear.. I tried putting a very large value for xlate and the firewall accepted it, and still showed the total percentage as 0%
Xlates           default          all      CA unlimited
                 123                2       C 2147483647 4294967294      0.00%
                 All Contexts:      3                    4294967294      0.00%
Whereas connection count is shown as
Conns            default          all      CA unlimited
                 123                2       C      65000     130000    100.00%
                 All Contexts:      3                        130000    100.00%
Any help is highly appreciated.
Thank you,
FNK

Hi
as far as i remember xlate is nat (regardless if it is static or not)
and on the IOS systems it is the same, static entries are in the table.
connections are actual session in the packetfilter/firewall sessions this is a differnet operation.
Patrick

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Songs and album covers don't match up?

On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
hope this helps, olly.

Quicktime mpeg-2 and quicktime versions don't match

I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification.
Does anyone know why it tells me the versions are different when they aren't ?

sorry for not putting enough info.
i just bought the quicktime mpeg-2 installer and quicktime pro upgrade for quicktime 7 yesterday(3-15-2009). i installed the pro upgrade and the mpeg-2 installer.
i checked both quicktime and the mpeg-2 installer to see what versions they are. they both say version 7.60.92.0, yet i keep recieve this message:
"QuickTime MPEG2 failed to load because the versions of QuickTime and QuickTime MPEG2 do not match."
But they match exactly. I am stumped. i even uninstalled and reinstalled both of them but still the same message.

Phone usage counter and carriers counter don't match?

Similar Messages

Maybe you are looking for