Phone went green and blue with lines and then switched off, apple symbol now appear on and off, any ideas?
My phone while using went green and blue and then switched off, now apple symbol flashes on and off , any ideas as to what is wrong?
NNo seriously, you have to restore it to its last backup, it froze in the middle of something and now it is malfuning
Similar Messages
-
My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?
that is the router I am on now reply to this message from my desktop, the router seems to be working fine, thanks
-
The cooling fan comes on just after switching on and does not switch off any ideas
The cooling fan on my iMac comes on just after switching on and does not go off any ideas please?
Do a smc and pram reset, See if those fix it.
-
Red circles now appear. Cannot playback any non-iTunes downloaded material on iPhone.
What is solutionkeith
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to Using IiPhone where it may get a more rapid response from your fellow users.
ÇÇÇ -
one of my iPhone contacts messages go out as green, not blue, she has tried to turn off and then back on her messages, and it works fine for everyone but me. Mine go as green o her. My phone is iPhone 5, hers is the latest iPhone.
Hello SaSexton,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Have a nice day,
Mario -
Battery is full. Phone went dead and won't turn on?
Battery is full. Phone went dead and won't turn back on even when plugged in.
Press and hold both the home and lock buttons until the apple logo appears.
-
Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?
Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.
-
photoshop elements 13 editor has stopped working EVERYTIME i try to use smart detail brus.windows 7 home edition with plent of memeory and speed. any ideas WHY
The faulting module is photoshop. Report below.
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
2/2/2015 4:54 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: Photoshop.exe
Fault Module Version: 15.2.2.310
Fault Module Timestamp: 5480338c
Exception Code: c000001d
Exception Offset: 00000000049de322
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 8db4
Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
Additional Information 3: f06d
Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
Extra information about the problem
Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000) -
when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?
Hi robfromkinglake west,
Try and isolate the issue. Check if it's only with this drive.
Check the drive with Disk Utility
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
I've never seen a drive take 20 minutes to mount.
Nubz -
After I edit a raw file in Lightroom 5 and with raw 8.5, the edited files revert back to being unedited. Any ideas?
bigjb3 wrote:
I edit them in Lightroom. Then the little symbol appears in the bottom of the thumbnail in the film strip at the bottom of the LR screen. Then, a few minutes later, the symbol is gone. I then click on one or more of the thumbnails and the image opens in the main screen. However, all of the sliders on the right are at their defaults, and the image is back in its unedited state. Last night, for a while, the edits reappeared, but tonight they were gone again. I just recently downloaded Camera Raw 8.5. I wonder if that is the problem.
What little symbol? Do you mean the up-arrow symbol that appears top-right of grid or film strip images? This indicates that the image has been edited by another program.
Or do you mean the "+/-" symbol that appears bottom right?. This appears after editing, but if it disappears subsequently without you doing anything, it sounds like something nasty is happening to the catalogue or image xmp file on disk.
Lightroom doesn't use ACR (8.5 or any other version) - it has the same functions built-in. ACR is used only by Photoshop. Are you opening the images in ACR in Photoshop? -
My ipad just flashes green and then switches off.its fully charged.help!!!
Dear Barry...thank you for your reply.I am afraid it still doesnt work. Theres a white flash and a shutter sound and it wont stay swited on. I only had it since Jan 2013.
-
I bought Football Manager 2015 but when it downloaded and I went to open it, it stays on home screen then cuts off, any advice?
Basics from the manual are restart, reset, restore.
You can also try removing and reinstalling the app -
My Iphone 4 will not send regular SMS messages. I have tried resetting my phone and by restoring and making sure i have SMS turned on. I receive them but can not send them. imessages work also. Plus my cellular data keeps randomly turning off. any ideas? Thank you
Yes I have turned imessage off a number of times and that does not seem to he doing the trick, and it is not delivering them then I have to press on the photo and either chose try again or send as text message, I have had the setting on to not allow sending pictures as texts (so they can only send as imessage) since I got my phone in January and it has always worked until now, I have turned that off to allow me to send them as picture messages now but it's still not working over iMessage, I have also tried it using 3G and not wifi
-
NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.
If you have Apple Care or your computer is still under warranty, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
Maybe you are looking for
-
How do I get the WebLogic server to use the XMLRegistry?
I'm using WebLogic 7.0.2, and I want to use the Apache TransformerFactory and DocumentBuilderFactory instead of the default weblogic.* classes. I've found the documentation, where I define an XML Registry as follows (snippet from my config.xml)... <S
-
Unable to clear Inspection Lot
Dear Sirs, I have a material with Inspection Type - 0101 The inspection lot of this material has the following status -CRTD,PREQ,CHCR,SPRQ,IRCH Unable to clear inspection lot in qa02 - insp specications tab -- while using Tasklist / Spec --> followin
-
Deploying war file on Tomcat: file path problem
Hello all, i am using my eclipse ide for automatically deploy my webapplication to Tomcat. For Database connectivity i configured hibernate. To configure hibernate i am using the following code: package de.wfm.hibernate.hibernateUtil; import org.hibe
-
Help! iMovie is not letting me put in Picture in Picture
Everytime I insert a picture into iMovie so it can play as a picture in picture, the picture is black, although I can see the picture above the clips. (I know my explanation is confusing. I will provide pictures.) Please answer asap
-
IPad doesn't boot!! Apple logo freeze!!
Hello, I've received one iPad that has been used by one of my Staff Directors. Now this iPad is going to be used by another person, so like ever I've reseted all the content (data, configuration, etc), but now the iPad doesn't boot and it is all the