Phone will not ring after ios update

Since I recently updated my iPhone 5s to ios 8.0.2 i am having a problem where it will not ring when I get incoming calls. what can be done to fix this issue?

Hi hobbs1977, 
Welcome to the Apple Support Communities!
I know it must be frustrating when you iPhone will not ring when you have an incoming call. The first thing I would suggest as far as troubleshooting would be to check the ring/vibrate switch on the side of your iPhone, just above the volume buttons, to make sure the ringer isn’t silenced. If the ringer is not silenced, continue to read over the information in the attached article to troubleshoot your iPhone sound. 
iOS: Understanding sounds, ringtones, and alerts
Have a great day, 
Joe

Similar Messages

  • My phone does not ring after ios7 update

    Since doing the ios7 update my phone will not ring. The speaker works as when the ringer is selected it plays the tune. The phone is not on silent.

    I had same issue. My phone will not ring or get text sounds when locked. This morning my alarm did not make a sound neither. Thanks to my dog who woke me up. My "do not disturb" was on. It's the moon on your quick menu. I wish the phone will let you know the "do not disturb" is on when you hit the home button to use the phone. I was not aware of this feature on my quick menu.

  • My phone will not ring since I updated it.

    I tried the DND settings....did not ring still. I checked all the obvious...ring tone...silence settings

    Also every friend I have with an iPhone is currently having this issue....that's 5 phones in 3 states with different providers and all did the update...that's why I think it's software. Also my husband is in IT and he can't figure it out.

  • Phone will turn on after ios update, itunes symbol and charger symbol keep showing up on screen

    iphone 4 won't turn on after an update, itunes symbol and charging symbol keep showing up but nothing happens when you press any buttons

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPho fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Ipad mini will not restore after ios update 7.1.2

    Hi Community,
         I recieved a message last night about the update 7.1.2 for my ipad mini. I left my ipad on overnight while plugged in while it was updating. i woke up this morning seeing my ipad must be connected to itunes. I connect my ipad to itunes and it must be restored. Every time i try to restore and update the ipad from itunes i get the error code 3004. I have tried hard resetting the ipad, re-downloading the latest version of itunes, and disconnecting and reconnected the usb plug. 

    Hello, Ronald. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps that I would recommend going through when experiencing error 3004. 
    Resolve network errors
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or say the "device isn't eligible for the requested build.". These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Cheers,
    Jason H. 

  • HT1620 My phone will not allow me to update to ISO 7.0.3. It says I don't have enough  available space even after I delete everything and indicates that I gave 5.0 gb

    My phone will not allow me to update to ISO 7.0.3. It says I don't have enough  available space even after I delete everything and indicates that I gave 5.0 gb

    Restart your phone, and if you can connect it to a computer and update it from iTunes instead of through wifi.

  • Phone does not ring after using Bluetooth

    I have an iPhone 5 with IOS 8.1.  My phone does not ring or notify me of incoming texts.  This happens after I connect to Bluetooth.  If I reselect my ringtone, the phone works, until the next time I use Bluetooth.  It seems like a bug in a recent update.

    I had same issue. My phone will not ring or get text sounds when locked. This morning my alarm did not make a sound neither. Thanks to my dog who woke me up. My "do not disturb" was on. It's the moon on your quick menu. I wish the phone will let you know the "do not disturb" is on when you hit the home button to use the phone. I was not aware of this feature on my quick menu.

  • Phone will not ring and goes to voicemail

    My phone will not ring and always go straight to voicemail.  I have rebooted, updated, etc but still have this problem.  Anyone have a solution???

    Contact your phone carrier.

  • Why is my iPhone 4 not ringing after iOs7 update?

    Why is my iPhone 4 not ringing after iOs7 update?
    I checked volume on side & n settings & rebooted

    Hello there Tgurnell
    Thank you for using Apple Support Communities.
    It sounds like the ringer is not ringing after the update to iOS 7.  I found an article with some steps to take when you are experiencing issues like this:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Sterling

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201401 My phone will not ring or vibrate despite ringer up to max volume

    My phone will not ring or vibrate despite ringer up to max volume & vibrate turned on.  Message tone does sound though when message comes in.  I know the sounds work as I have tested them, they just don't work with incoming calls????

    toggle ringer switch right above the volume up button

  • My phone will not ring

    My phone will not ring & when you call it , it doesn't ring just has odd tone almost like a fax machine. We have reset it and checked all settings

        Let's make your phone ring Kerir! When did this issue start? What is your phone model? What is your ZIP code?
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • My phone will not ring when a call is coming in? Please help?

    My phone will not ring when a call is coming in.?

    Yeah, because if the switch isn't on, the phone is put on vibrate.

  • HT201270 phone will not ring, only vibrate

    phone will not ring... only vibrate and I am missing calls... please help

    There is a switch on the left side of the phone, above the volume buttons. Flipping that will mute/un mute the phone. Also try pressing the volume up key a number of times.

  • HT201401 phone will not ring  it vibrates but does not ring ..volume is up..

    phone will not ring
    volume is up but it only vibrates.

    it didn't work in my phone. Volume is high, no mute, no in don't disturb. I went through the whole setting and found nothing out of place. Games lost sound but itunes music play well.
    Any idea?

Maybe you are looking for

  • How to set up a FTP and web server and integrate with DMM 5.2

    Hi All ... I need to set up a external server only for content publishing to reduce the overhead of the DMM server . can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2 Thanks

  • How to sync two iPhones on to the same MacBook Pro?

    I have an iPhone 4 and previously I would sync my phone to my MacBook, but my husband bought me a PC.  So now instead of figuring out how to sync to my PC I would really just like to sync to his Macbook Pro, as I am using that more due to a new job. 

  • Old Mac games not working

    I've just found a box with some of my favourite old Mac games in that I used with my old Lime iMac. Titles such as FA/18 Hornet, Command and Conquer and Railroad Tycoon amongst others. I also have some education disks that are invaluable resources. I

  • Enable a link in tool area

    Hello all, I'm trying to put a link on tool area iView. I know that tool area has a property EnableLink1. I've tried to filled EnableLink1 with PCD address but it's not working. Does anybody knows how to put an external on tool area iView? Thanks, An

  • Unable to create a CD project all of a sudden

    Ive got a multitrack session thats 55 mins long, with CD track markers in place. I go to export the mixdown into CD view, choosing to natually retain the markers in order to creat CD tracks. However, after exporting, instead of Audition asking me how