Phone will NOT stop making the email notification sound.

I just restored and upgraded to 2.0.2 and now my phone won't shut up! I'd rather not go through the restore again. Any suggestions?

Apple sanctioned? I think you just need to downgrade iTunes, then re-install what ever version you want. How can it not be Apple sanctioned? They are still Apple software, just your choice.
If you need earlier versions for the iPhone try.......
http://iphonefreakz.com/iphone-firmwares/

Similar Messages

HT4528 My phone will not send me the email to verify my iCloud account, how do I get this to happen?

I first got my iphone 5 in July and I set my phone but my iCloud account would not verify so I have tried to delete the account and do it again but it will not send me the email I need to verify my account. So please someone help me with this. Thanks

Hi Belinda80!
I have an article for you that can help you address this issue:
I cannot sign in to the iCloud Preferences pane on my Mac due to an alert stating that my email address has not been verified.
If you cannot sign in due to an alert stating "Account not verified - Check your email for instructions for verifying your account":
Close and reopen the iCloud Preferences pane before logging in again.
If that does not resolve the issue, check your email folder and Junk folder for a verification email sent from Apple.
If there is no verification email in your email folder or Junk folder, click the Resend Verification Email button on the iCloud Preferences pane.
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

Although I plug my iphone5 into a power socket or my laptop,the phone will not charge. The phone indictaes it is charging, but the phone does not recharge

although I plug my iphone5 into a power socket or my laptop,the phone will not charge. The phone indictaes it is charging, but the phone does not recharge

Hi syvliebaby88888888,
If you are having issues with recharging your iPhone's battery, I would suggest that you troubleshoot using the steps in this article -
iPhone and iPod touch: Charging the battery
In particular, this section -
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for using Apple Support Communities.
Best,
Brett L

Playhead will not stop at the end

When I play my project in FCP the playhead will not stop at the end but will continue for a few seconds. So when I want to share my project I have to make a range so that I don't have a black clip at the end. There's no gap or what so ever on the timeline. How can I solve this? Thanks for your answers.

Unfortunately, the problem is not solved. When I hit the end key the playhead goes to the end. Actually one frame further. Because when I go back one frame, I get the end clip symbol in the corner. But if I just play, the palyhead goes further for a 3 seconds. Then I get the clip symbol "negative edge" on the rightside. See also image. And there is nothing in the timeline.

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

Restore iPhone with iTunes on your computer.

HT201263 I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

I tried to update software on my i phone 4s and the phone will not restart past the apple logo? The logo keeps flashing up but wont go further.. please help!

Place the phone in recovery or DFU mode (search Google) and restore.

My phone will not sync on the computer and it has only happened since the IOS 6 update... anyone having this problem?

my phone will not sync on the computer and it has only happened since the IOS 6 update... anyone having this problem? solutions?

Yes i have the lastest operatiing systems for all devices. when i try to sync it says "Cannot sync because synce failed to start"

Can I change the email notification sound?

I can't hear the email notification sound on my iPhone. Is there a way to customize it? I have it turned up as loud as it will go, but, if I'm out somewhere, and my phone is in the holster, I can't hear it!
Any help would be appreciated!!
Stephanie

Hi Stephanie,
The email sound options are in Settings> Sounds. There is no option to change the tone.
You can leave iPhone feedback requesting a feature be modified here: http://www.apple.com/feedback/iphone.html
-Jason

The email notification sound is always the glass even when I change it

The email notification sound is always the glass even when I change it, tried many different sounds but the email always sounds as the glass
Pls help at wits end

Here in Apple Support check this discussion hopefully it will help:
https://discussions.apple.com/message/23673157#23673157

HT4061 My iphone has stopped working but the lock button IS working...when it stopped working it had a 50% charge left on the battery...it simply went to a black screen and will not turn on...my phone will not charge on the computer or the plug socket

Hi
My iphone 4 has stopped working...the lock button IS working...when it stopped working it had a 50% battery remaining...it was working when I last used it and when I returned it had a blank screen....it will now not charge or connect to itunes when plugged into the computer and it will not charge on the plug socket....I think the last iOS op system updated was 5.1.1....please help

Try holding both home and power buttons until apple logo appears (ignore on/ off slider) and then let go. No data will be lost. Wait for phone to restart

Failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent. Email Notification Component Properties works fine.

I know there are a few other questions like this but I can't seem to find how it's relating to my issue. I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
in the reports feature of sccm.
I just picked a sample report Compliance 4. I right clicked hit create subscription and input my email into the TO: field. When it runs i get the above error. I checked the email notifcation under configure site components and was able
to successfully send a test message from there but I dont get why it doesnt work on the subscription.
Any Ideas?

The log is pretty big so im not sure where I can upload it. I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here. Let me know some place I can send you the full log file
or if you want a different log.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
at System.Net.Mail.MailAddress.ParseValue(String address)
at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed. Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0

Priority not presented in the email notification

Hi all :) .. my problem is when i create an incident directly from the console a notification will be sent to the affected and assigned to users that shows the target resolution time and the priority, but when the incident is created from the portal or
in other words from a template it doesn't show priority or target resolution time, when i set the impact and urgency values in the incident template the priority value is always empty unlike creating the incident directly from the console !! anyone can help
??

Priority and Target Resolution Time are calculated values. They're calculated by the Incident Form. When you select the Impact and Urgency on the Incident form, the form itself (in the code-behind) sets the Priority value based on the Incident
priority matrix (which can be configured in "Incident Settings" in Administration|Settings). It also sets the Target Resolution Time.
So, when you create an Incident from a template using the portal or any other process other than the Incident Form, the priority value and Target Resolution time will not be automatically populated.
Here are some solutions you can explore with varying levels of complexity and compromises:
1) The easiest (in my opinion) is to simply set the priority value in your template. This can be done by directly editing the management pack template. (The Priority isn't calculated when you're creating an Incident template using the Incident form
in the console..it appears to be a bug in the Incident form.)
The compromise is that anytime you change the Incident Priority matrix the priority value in your template may no longer match what you changed. Plus you'll have to manually modify the xml in your incident template's management pack.
The other compromise is that you can't really set the Target Resolution Time in the template because you don't know what it will be. So your notification still will not include it.
2) Create some custom workflows, extend the Incident class, and re-work your notification subscription criteria. This is an uncomfortably complex approach (maybe someone will have a simpler one). This approach assumes you only want to send a notification
when the Incident is created and only when the priority/TRT has been calculated.
Extend your incident class with a "PriorityCalculatedSendNotification" Boolean property.
Modify your Incident template and set the PriorityCalculatedSendNotification value to false.
The first custom workflow will trigger on the creation of an Incident. This workflow runs C# or a Powershell script that examines the Incident Priority calculation and applies the appropriate value to the new Incident's Priority property if the
Priority/TRT is not already set. Similarly, if the Priority isn't already set, it also sets "PriorityCalculatedSendNotification" to true. Lastly, it calculates the TRT and applies that value to the Incident record.
The second custom workflow triggers when and Incident is updated and the PriorityCalculatedSendNotification is true. This workflow sends your notification template and also applies a new Incident template that sets the PriorityCalculatedSendNotification
to false. (The only value in that template would be PriorityCalculatedSendNotification=false to prevent it from overwriting any other value)
Your existing notification subscription that triggers when an Incident is created needs additional criteria. The additional criteria will be "Priority not equal to null" or "Priority not equal to 0" (one of those two, I can't remember
off the top of my head which option it is).
3) The simplest option of all..in your email notification, simply say "If this incident was created from the portal, it will not have a priority or target resolution time yet". Instead of adjusting Service Manager, adjust your
user's expectations ;)

I phone will not let me send email says rejected by server

will not send emails on i Phone 4

if thats the error msg you can try a diff outgoing mail server,what is your domain server??(hotmail,yahoo,google)

HT4623 my phone has a message that the iphone is disbled connect to itunes. I try and the message said you must unlock your phone.but the phone will not bring up the key board for me to put the code in. what do i do?

Iphone has a message on it that said iphone is disable connect to itune. i try but it said that you must unlock your phone. but the iphone will not let me bring up the keypad so i can put the code in to unlock it, it has the message iphone disable connect to itune. what can i do?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

Phone will NOT stop making the email notification sound.

Similar Messages

Maybe you are looking for