Phone wont get off verizon screen

The phone keeps going back n forth between the nokis and verizon screen. i tried the holding the power and volume button its not working. And it this is the replacement phone

Reset it.
If that does not work, restore it.

Similar Messages

Ipod Wont get off apple screen!

Hi,
My main problem with my ipod mini is that its fully charged and when i turn it on it wont get off the apple screen. It stays on there for like 5 - 10 seconds and makes a clicking noise and shuts off and then restarts and does it again. I cant even get to the menu. So, if this problem has happened to anyone else? Or if anyone knows how to reslove this problem i will greatly appreciate any help i can get.
Thank You,
Zack

Reset it.
If that does not work, restore it.

What do i do if my ipod's screen blanks out and wont get off the apple logo?

what do i do if my ipod screen blanks out and wont get off the apple logo screen what do i do i need help asap!!!!!!!!!!!!!!!!!!!!

See Here...
iOS: Not responding or does not turn on
Try this First... You will not lose ant data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the suggestions again.

"DO NOT DISCONNECT" WILL NOT GET OFF MY SCREEN!!!

please help! i have just gotten my ipod three days ago. it worked fine, at first. it has already deleted a few of my songs (which came from burned CDS) and now, "do not disconnect" will NOT get off my screen! it is COMPLETELY charged too. i can unplug it and listen to the 6 songs i have in there now, but other than that i cant download any on there. hopefully someone knows what to do because i'm terribly frustrated! thanks!

I'm having like almost the same problem!! do not disconnect NEVER gets off my effing screen when its plugged into the computer and when it isn't, there isn't any music!! i just got my ipod mini YESTERDAY and it hasn't been working (i only tried today) like it charges and stuff but it won't let me put music on and the itunes thing never comes up and i'm so completely lost right now its really aggrivating :'(

Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

How do i get things off the desktop once it has been put in the trash? it shows that its in the trash, but it wont get off my desktop!!!!!It wont open from the desktop either!!!!

How do i get things off the desktop once i put it in the trash? it shows in the trash but it wont get off my desktop..... it wont open from the desktop either????

There are several ways. The two easiest are to click the Junk icon to turn it off or right click the message and select Mart As-Not Junk.

Phone is getting off when the battery reaches 20. %

Phone is getting off when the battery reaches 20.%. Please suggest what need ti be done. Is its hardware battery issue or software issue ?

Lawrence Finch wrote:
Yes you can. Take it to an Apple store and they will replace the battery. If it is in warranty there is no charge. If it is out of warranty they will charge $79. But best of all they will test the battery first, and if the battery is OK they will help diagnose the software problem.
Here I am, corrected again
Thanks, Larry, for letting me know.
-Ethan

My ipods screen says connect to itunes, so i connect it and nothing happens the same screen stays on, it will not get off that screen. I know my cord works because when i plug it in it says charging. What do i do?

My ipods screen says connect to itunes, so i connect it and nothing happens the same screen stays on, it will not get off that screen. I know my cord works because when i plug it in it says charging. What do i do?

Restore your ipod

MacBook Pro won't get off startup screen with apple logo. Help?

Could someone please tell me how I can get my macbook to get off that stupid startup screen with the apple logo? It won't go past that screen and boot properly. I have tried reinstalling OS X didn't work. I tried running a disk utility test and no errors where found. I don't have the time machine thingy so I couldn't try that. Is there anything else I can do before taking it to Apple and l
paying hundreds of dollars???
thanks in advance!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

URGENT, Phone wont get past start-up screen and iTunes doesnt see it

My 3.0.1 problems just got WAY worse!!!
After the 3.0.1 update I started having the same issues as everyone else until today. I noticed that my clock was just picking a random time( hours and minutes were off) and would not take to my manual setting of the time or on auto. So as i have been doing several times throughout the day, i performed a hard reset. Only this time it never came out of the reboot/start-up apple symbol screen. I then attempted to perform the hard restart several more times to no avail. I am now stuck with a phone that will not boot nor can i connect it to my computer. While connected, iTunes does not detect it and i can not do a restore either. any suggestions would be great but i fear for the worst!!!

Try to connect in recovery mode and restore: http://support.apple.com/kb/HT1808
If you can make it, restore "as new iphone" , maybe your backup contains corrupt files and these would be copied back using the "restore from backup" function.

Im signed into an icloud account on my phone and i dont know the password so i did another email to it and it still wont get off my phone.

Im having a problem with my iCloud account. I had changed it to another account because i had forgotten its password and when i enter it it doesnt work. I tried to delete it off of my phone but it asks for the "Find My iPhone" and either Cancel Or Turn off and it asks for the password that i had forgotten. I had tried to get the password for te account reset but anything that i do it doesnt send me the iForgot recovery password.

Hello, JillWalker.
You will need to remove your device from the Find My iPhone Activation Lock section of iCloud.com. Once you have removed your device, process the restore again.
iOS 7: Mobile Device Management and Find My iPhone Activation Lock
http://support.apple.com/kb/HT5927
Cheers,
Jason H.

My phone wont exit the settings screen and wont lock or turn off

phone stuck on settings menu wont exit also it wont lock on its own or with lock button wont exit with home button either

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the phone again

HT201210 Ive updated to ios 6 using wireless. once completed it has asked me to plug my phone into itunes. i'm away from home without itunes what can i do ? the phone cant get past this screen

Ive just tried to install iOS 6 using wirless. Once completed it asks me to plug it into itunes.
I'm away from home at the moment so i dont have access to itunes. is there anything i can do ? the phone will not do anything !!
is there a way to get passed this or revert back ?

I have the same problem and we can't simply just restore from the backup. It says that I have to set up my iPad through restoring. So I tried restoring it in iTunes but it won't restore until I have to turn off this **** "Find My iPad" crap but I couldn't because the set up's not complete and it won't let me go to my settings unless I set it up. So basically it's asking me to go to my settings but before I could go to it I have to restore, and in order to restore I have to go to settings. Get where I'm at?
Please, Apple Tech people! Help this 14 year old girl on her period, PMS-ing, thinking about how I want to strangle however made this mistake of a set up, updating her iPad in 3 am in the morning cursing the day she even thought of updating. I seriously need to get out of this loophole. I don't want to use my other iPad that only has 16GB. I just wanted the pretty graphics I saw in my parent's iPad airs, I don't ask for anything more :''''(

Satellite C660-106 wont get past boot screen and shuts down

hi all new here
well we have had our c660 106 for 2 month now,but the missus decided to drop it from about 6 inches high, it stayed on but the led screen is cracked internally as the colours were bleeding over etc,unwatchable.
It stayed on untill today and ive been pricing screens up.(had it connected through rgb to my home lcd)
i had to unplug the laptop and turn it off,but now the problem is when i switch it on it will do the inital fire up to the toshiba black screen where i have the options 0f f2 and f12 but then immediately turns off completely, we are worried now as we have a 1 yr old and we have everything she has ever done on there,
is there anything i can try
i know warranty wont cover it as its obvious the screens broken and not just failed.
any help would be brill
thanks

Hi nicolas221078_1
This sounds to be some damage to the motherboard or cooling system and this is why it is now turning off all I can say is are you able to access the BIOS if so then it may be the HDD but if not then you will know 100% it is the motherboard.
If the HDD is ok then you can take it to a data recovery service that should be able to recovery most or all of the data that is stored on the HDD.
also just another thing to point out is to check the memory is sat correctly in the laptop this will not cause any issues with a warranty, also have you though about contense insurance they may cover the damage laptop.

After upgrade imac won't get off login screen

My harddrive died on my imac 24" mid 2007 and I replaced the harddrive. I chose to migrate my data from an external drive. After waiting for all of that, my password didn't work, so I find the solution in the forum and was able to log in.
Everything was working fine...able to change the password. When I checked for software upgrades, it said to upgrade to 10.6.8 (from 10.6.3). I did that.
Now my imac loads, asked for my password, starts, goes to blue screen, and then comes back to login screen.
I have tried all the special keys to launch from my install CD, whatever, and get the same result...it always ends up at the login screen.
I can't get the computer to launch in safe mode or anything...just the login screen...so I'm basically stuck.
Does any one have any ideas or solutions? I would love to just format the drive and forget the migration, but can't even do that.

You can't boot off the DVD? Try holding down the option/alt key during a restart and see if you can select the disk there to boot from.

Phone wont get off verizon screen

Similar Messages

Maybe you are looking for