Phone wont start after i tried to update

i have been trying to update the software on my Xperia V lt25i through my computer it kept failing now when i try to start it all i see is the SONY logo then it cuts off. need help?

Download sony update service and retry the update:
http://www.sonymobile.com/gb/tools/update-service/
Charge the phone for 1 hour before.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

HELP ! my ibook wont start after downloading 9.1 update

Hi
i decided to update my os 9.0 on my old ibook, and downloaded all the updates that needed to be installed, i started off with installing the 9.04 update, and after that was installed i ran the 9.1 update, during the installation the system promted for a reboot, and after that my ibook locks up when the "loading" bar is in the middle in the starting screen,,, i dont have much mac xpereince, so i would realy apprrecieate any help !

Hi, honkatped -
Just happened to be around.
Okay - if it boots okay with Extensions Off, then it would appear you have an extensions conflict of some kind.
Re-installing the OS would not fix that. Instead, it will take a bit of work to find what is causing the problem - it may be an incompatibility with some 3rd-party software item.
First, restart - immediately hold down the Spacebar, keep it held down until Extensions Manager opens; it should do that just before extensions start to load (just before the march of icons across the screen starts).
Once Extensions Manager opens, select Mac OS Base from the Selected Set pulldown menu near the top of the Extensions Manager window. Then continue the startup.
If that boots okay, select Mac OS All as the Selected Set in Extensions Manager, and restart. If that boots okay, then some more work will be needed to isolate the offender. Let us know how it goes to that point.

Aperture 3.1 & Lightroom 3 wont start after 10.6.5 update

Since I updated to 10.6.5 the whole system has slowed down. The biggest problem is Aperture and Lightroom stop responding when opening up. The strange thing is is that if I click on Aperture to open I get the spinning wheel until I click on "software update" then as if by magic, aperture pops up on the screen. Any ideas guys

CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
I have 171gb of hd space and I have repaired permissions ect. Everything was fine before I updated to 10.6.5. Can I roll back to 10.6.4 ? Just like having a pc this

My iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4.

my iPhone 5 wont turn on after i tried to update from 6.1.3 to 6.1.4. My Phone refuses to turn on. i bought my iPhone from someone else and i don't know if the warranty is voided, how can i find out if is voided ?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

That's because part of iOS7 had code in it to look for and recognize unsigned cables.
In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

After a phone reset,apple logo appears but phone wont start

After a phone reset,Apple logo appears on screen,but phone wont start!!

That hapened to me and this fixed it. I dont know what it does or how it works so dont hold me accountable but it worked for me
Entering DFU Mode (Official Instructions)
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
Make sure the device screen is blank and no logos are present
Exiting DFU Mode
Hold Home and Power Button till the Apple Logo appears
~Jordan

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Z1 wont start after stick firmware was installed

I had some problems with the current version of my Xperia Z1 and decided that I needed to install the stock firmware. I downloaded the standard and advised Flashtools and installed the stock firmware. After attempting to turn the phone on, the following screens appeared. The "Sony" logo appears, then the "Xperia" logo appears, and then the swirly ribbons move from left to right on the screen, and suddenly they stop moving and it goes back to the "Sony" logo screen and the entire process repeats. I don't really know what to do now, either to install a different firmware or maybe is there a program that resets the phone by simply connecting it to the USB. The problem is, the phone wont start. Help will be highly appriciated.

Download SUS:
http://www.sonymobile.com/gb/tools/update-service/
Charge the phone for at least 2 hours,repair with SUS.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Is there any app for phone auto start after swithced off??

Is there any app for phone auto start after swithced off??

Are you looking for an app which will startup the Z10 at a specified time?
I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in and pressing the home button but nothing is working?

I have assisive touch so I cannot use power button on top but my phone wont turn on I tried plugging it in and pressing the home button but nothing is working?
please help

- Connect to computer and it it shows in iTune restore via iTunes
- Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Phone wont start after i tried to update

Similar Messages

Maybe you are looking for