Phone works even with incorrect lock code

The phone presents me with a locked screen after boot. No matter what code I type in, it first shows a message saying 'code error' and then lets me through.
Strange, but any idea why this works like this? I don't see any use of the lock code with this behaviour.
My c6 is updated with the latest available firmware as of today.

Hi ryanc6,
We're sorry to hear about your problem.  
Have you tried the default lock code 12345?
Usually the lock code is requested after the update only if you have defined it earlier by locking your phone. You will be able to use the phone even if a wrong code is entered, but your phone will continue to ask for the lock code every time you start your phone. Your phone will also prevent you from performing secure operations, such as locking your phone manually or restoring factory settings, until the correct code has been entered once.
Please check this thread for Nokia E51, it may contain some solutions you could try.
If the problem persists, please visit your local Nokia Carepoint and let them have a look.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android phone worked perfectly with my car.  Even the tech guy at Lexus couldn't get it to work.  What is apple doing to fix this.

    The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android worked perfectly with my car.  Even the tech specialist at Lexus couldn't get it to work.  Lexus said that other iPhone 5s were having the same problem.  What is apple doing to fix this?

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • The network is always edge not 3g in Sun Cellular . Philippines in my ipad3. Other smart phones work well with 3g here

    Please help, my ipad3 gets only e signal instead of 3g in the philippines Sun cellular network network which is also a 3g provider. SIM works fine with other 3g phones. Giving 3g signal. Is there a way to lock the ipad 3 to a purely 3g signal?

    Sony

  • Ipod Touch 5G- WiFi is very slow or won't work, even with 3 bars and stood next to the hub. Is there a problem with iOS 6.0.1? Any one know a way to fix it?

    Even with 3 signal bars on a 11mb/s connection. It takes more then 3 mintues to load Google fully!
    It works fine loading one page then goes back to being slow or no excitant. It seems to start working again after using speed test.
    At first i thought it was the case but after removing it there was no difference
    I have tried every thing i could think like:
    1. Turing it off and on again
    2. A complete restore and backup. (Done this about 3 times)
    I'm not sure if the new iOS 6.0.1 up date has caused this as it seemed to work fine for about a week after.
    Any help would be appreciated!

    I have same problem:
    I saw another topic on this but it was a couple of months old. Last month I purchased a ipod touch 5g. It runs great except the speedtest tops out at about .3 mbps down and 5 mbps up.  I don't understand what is going on. All my other wifi: Macs, ipod touch 4, ipad 2 & 3, etc work fine and get great speed of 9-15 mbps down and 5 mbps up. I can barely watch an Amazon video. Sometimes it goes fast but that is few and far between. I have tried resetting the network on it. I adusted my router for all the recomendations by Apple.
    It was suggested to remove the security on the router just to test it. I did that but it made no difference. This happens whether I'm close (10' or less) or farther away. Is there something I'm missing or do I need to return it?
    I keep seeing something about iOS 6.0.2 but my iPod Touch says I'm up to date at 6.0.1
    thanks,
    Bryce

  • Problem With my E72 with invalid lock code

    Hi,
    I just configured a new exchange mail account. Prior to that I have configured a my previous firm mail exchange. I forgot the passcode. After setting up new account it asked for the lock code and i tried many time which reulted in data loss. I lost all my data in the phone and also I am not able to access my memory card. When I tried to connect to the phone via USB to my laptop(mass storage), to my surprise its is forcing me to format my data card in the phone.
    Can some one guide me if there is any possibility to access my data on the memory card?
    Thanks in advance!

    Click the link below choose your country then choose service and see if you have an Apple Authorised Service Provider in your country.
    https://locate.apple.com/au/en/
    If you dont have any Apple Authorised Service Providers near you either then contact AppleCare and ask them for options for postage in your country/region. You can find the number for your country below:
    http://support.apple.com/kb/HE57
    Hope this helps

  • IPad locked with no lock code

    Setting up an iPad mini brand new with IOS 6.00. Tried to turn on screen lock. Unit set lock as on but did not ask me for the lock code.  It is now locked and I have no way in. What gives.

    See here - http://support.apple.com/kb/HT1212  and here -  http://support.apple.com/kb/HT1808

  • HT1338 My MacBook Pro (running Leopard 10.5.8) won't allow keyboard to type an upper case 'C' using the shift key...works fine with caps lock, or, with my Typinator workaround using double-typed lower case c (not always best). Any ideas?

    My MacBook Pro keyboard won't type an upper case 'C' using the shift key... only with caps lock. Workaround has been to use Typinator by typing a double lower case c, not always the best solution. Mac is a refurbished model, which initially was fine. Apple tech helped me correct the quirk when it first appeared, but now it has returned and refuses fixes. Any ideas?

    I'm willing to bet that this has something to do with iCloud.  I've been facing a frozen computer nearly every time I go into it. 
    In Activity Monitor I have seen two programs associate with iCloud that take up about 2.5 GB of memory (I only have 4 in the computer) -- causing everything to freeze.  One of these is called "iCloud Helper" and the other one is something like "Address Book Sync helper" -- I see parts of these names in the stuff you have posted.
    I am at my wits' end with these and have written to Apple asking them to do away with these or fix them.  To get rid of the Address book sync thing I have gone into system preferences for iCloud and unchecked Contacts -- but then spontaneously it gets rechecked.  And oftentimes after I Force Quit the iCloud helper, it spontaneously turns on again.  My conclusion --- the iCloud is basically unusable.  It turns a Mac into the most useless, clogged, sluggish PC.  If this is happening to a lot of people's computers -- and I see no reason why yours or mine should be an exception -- these programs just might destroy Apple itself. 
    So -- I'm about to completely give up on iCloud, and I suspect that others will too unless this gets fixed.
    Cheers,
    Bob

  • My document plays as a continous loop even with the stop(); code at the start of the document HELP!

    I really need help for a school project im working on, it seems as though flash doesnt even recognise the actions in the layers, the codes in the first frame are as follows:
    stop();
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnOS.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
    function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void
        gotoAndStop(8);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnia.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
    function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
        gotoAndStop(41);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnDD.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
    function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
        gotoAndStop(64);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnCA.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
    function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
        gotoAndStop(2);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnSpt.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
    function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
        gotoAndStop(3);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnent3.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);
    function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
        gotoAndStop(4);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btntvf.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
    function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
        gotoAndStop(5);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnmus.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
    function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
        gotoAndStop(6);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btntrans.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
    function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
        gotoAndStop(7);
    /* Click to Go to Frame and Stop
    Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
    Can be used on the main timeline or on movie clip timelines.
    Instructions:
    1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
    btnHome.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
    function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
        gotoAndStop(1);
    Surely this should stop the document from looping when tested, when testing the images and buttons ect seem to be distorted and in different positions.
    if it helps here is a download of the document:
    http://www.sendspace.com/file/oxqciv

    Again, you must read your "Compiler Errors" panel and fix the issues in there. Exporting clearly states:
    Scene 1, Layer 'Actions', Frame 8, Line 71
    1021: Duplicate function definition.
    So go to scene 1, in the layer named "Actions", on frame #8, code line 71 and check the function name there which is: fl_ClickToGoToAndStopAtFrame_3. It tells you there's a duplicate function definition which means the function name needs to be changed because it's colliding with another function that has already used the same name. The timeline remembers functions and variables frame to frame so you can't use define the same function or variable twice without errors.
    Change the function name to something you know will be unique like: fl_ClickToGoToAndStopAtFrame_999999999 on both that line and the function below it to match (2 occurances of it in that script) and the error goes away.
    After that it compiled and ran fine but I received errors as I clicked through other pages. Your job is to read those syntax errors, go to the place specified and fix it until you no longer get errors.

  • Why doesn't my Phone work properly with my Cars Bu...

    Car manufacturers are now building complex car kits into their vehicles.
    The companies include:
    Ford, Audi, BMW, Alfa Romeo, Peugeot, Vauxhall/Opel, Volkswagen, Mercedes, and other high end specification cars.
    One of the functions, is that it pulls the phone book data from the phone via bluetooth.
    Background Information 
    A lot of the Nokia E and N series, Symbian S60 handsets, do not carry the required bluetooth profile in their bluetooth stack.
    The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
    Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
    Additionally the Nokia 616 Car Kit Downloader will also function, along with the Ford Connectivity Downloader.
    Workaround 
    The information is here:
    http://europe.nokia.com/A4143881
    You'll need to delete the existing pairing in the handset and the car, then install and run the application, don't just install the application and expect it to work, you must re-pair the handset and the car.
    When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
    It may copy the phone book over, but the Missed Dialled and Received calls may not work.
    I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
    The Nokia E71, appears to have the profile and functions correctly with an Audi car kit, in Handsfree Profile mode.
    The Nokia E71, when connected in SIM access profile mode is the same as the other E and N series handsets are requires the 810 or 616 downloader to be installed in the handset.
    Installing the 810/616 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
    It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
    For some cars and handsets, when you are connecting with the SIM Access Profile function, you will still need to install the 616/810 downloader application as detailed above, as the phone normally switches off most of its functionality. The phone book will then normally function when you have installed the application.
    The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.
    Edit: 24-01-09
    I have noticed recently that random disconnecting can be caused if you have an Internet Telephony Service running in your handset. Also if you have the WLAN discovery setting enabled then this can cause the same problem - whilst I am not attempting to try and resolve random disconnects, it could be a reason for why this is happening.
    I have recently installed a VoIP service in my handset and 100 mtrs from my home when the handset disconnects from this service at my house, the Bluetooth disconnects from the Car Kit, in my E71.
    Edit 14-04-09
    Audi also make a Bluetooth Sim Access Profile adapter for their Generation II and Generation III (Low) mobile telephone interface. (Audi Part No: 8P0051440) The SIM access service will require the 810 phone kit downloader application. With this on my kit I am getting disconnections with Bluetooth. To prevent this, I switch Bluetooth off and then on again prior to connecting to the kit, this resolves the disconnecting.
    Edit 12-05-09
    Further to the Audi edit above, I now have an Audi S4 2009 with the Audi Mobile Phone Preparation (high) for this to function correctly with phone book access the 810 Downloader needs to be installed, and running when the phone connects to the car every time it connects. Otherwise the phone book access does not operate.
    Edit:12-06-09
    You can also use the Ford Contact Downloader application from
    http://www.ford-mobile-connectivity.com/ - select downloads then Select a Nokia E or N Series Device and download the contact application (this works fine in my Audi)
    Shunts...
    Message Edited by shuntfield on 02-Nov-2009 02:51 PM
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

    It allows me to load the AKO CAC sign in page.  I click sign in using CAC, it asks me for my pin, I enter it then it load the page saying it has a problem with the security

  • SB live 5.1 not working even with original new installation cd.Pls H

    Hi,
    I have purchased just last week a brand new PC with intel 95 chipset asus mbd P5-GL-MX having on -board azalia sound component.Along with just got box packed Li've 5. sound card. This has in pack original installation cd.after installing card and everything when i try to run installation cdit says "No sound card installed please insert soundblaster ".i have os win Xp with sp 2 now after investigating through all the post in this forum i have tried everything but yet not succeeded.My message to moderator and compny personnel is that even the new installation cds does not have solution for such problems than if they knew its difficult they should insert small notes atleast that givena hassle free installation so we dont hvae to go and start hunting for the solutions.i was great fan of creative but this has revealed their true face.My final request is atleast provide the working solution for my problem.Expecting prompt action.
    thanks
    Manish

    First of all you need to get into the setup menu when the computer is turned on. Hit the del key and it should bring up that menu. DO NOT CHANGE ANY SETTINGS NO MATTER WHAT!! Look for the sound settings which are usually hidden clear at the bottom of the menu on one of the settings. It shoud say onboard sound enabled. You have to use the arrow keys since the mouse doesn't work in the menu so don't try to use it. Now when you find the onboard sound you have to disable it in order for the new card to be recognized. If you got the motherboard book with the system then read it. It shows how and where to look for this setting. Good Luck
    Message Edited by Smokey53 on <SPAN class=date_text>07-9-2005 <SPAN class=time_text>08:07 PM
    Message Edited by Smokey53 on 07-9-2005 08:0 PM

  • Form submit not working even with usage rights enabled

    Hi everyone,
    I created a form in Acrobat 7 professional (mac version), then used Acrobat 8 (windows version) to enable usage rights.
    I have the following javascript code attached to a submit button:
    this.mailForm(true, "[email protected]", "", "", "RSVP", "Yes! Please register me.");
    When I test the form in the full version of Acrobat by pressing the submit button, it automatically launches my email program, attaches the form's .fdf file and addresses the email, ie. just as the code directs. The problem is that when I try and test in either Acrobat 7 or 8 Reader, it won't work, ie. I press the submit button but the email program doesn't open etc. As I said, I've already enabled usage rights in Acrobat 8 so I don't know why it's not working.
    Can someone tell me what might be going wrong?
    Appreciate any help offered.

    pjones, Tembowa is correct.
    if you look up the mailForm in the JavaScript reference guide, you see it's marked with the letter 'F', meaning that the PDF requires Form rights in order for this method to work in Reader.
    Now as you rightly say you can use Acrobat 8 pro to extend a PDF with usage or Save rights. (These will be marked by the letter 'S' in the JS reference guide.)
    In short when you enable a PDF in Acrobat pro, you 'only' assign Save rights. This is not sufficient for the mailForm method to function in the free Reader.
    For mailForm to work in the reader you need to assign a PDF with form rights, which can only be done using LC Reader extensions.
    Hope this clarifies things.

  • Euro-sign (and Greek) doesn't work even with nchar/nvarchar2

    This is something that has been blocking me for a few days now, and I'm running out of ideas.
    Basically, the problem can be summarised as follows:
    declare
        text nvarchar2(100) := 'Make €€€ fast!';
    begin
      dbms_output.put_line( text );
    end;And the output (both in SQL Developer and Toad) is:
    Make ¿¿¿ fast!See, I was under the impression that by using nchar and nvarchar2, you avoid the problems you get with character sets. What I need this for is to check (in PL/SQL) what the length of a string is in 7-bit units when converted to the GSM 03.38 character set. In that character set, there are 128 characters: mostly Latin characters, a couple of Greek characters that differ from the Latin ones, and some Scandinavian glyphs.
    Some 10 other characters, including square brackets and the euro sign, are escaped and take two 7-bit units. So, the above message takes 17 7-bit spaces.
    However, if I make a PL/SQL function that defines an nvarchar2(128) with the 128 standard characters and another nvarchar2(10) for the extended characters like the euro sign (the ones that take two 7-bit units), and I do an instr() for each character in the source string, the euro sign gets converted to an upside-down question mark, and because the delta (the first Greek character in the GSM 03.38 character set) also becomes an upside-down question mark, the function thinks that the euro sign is in fact a delta, and so assigns a length of 1.
    To try to solve it, I created a table with an nchar(1) for the character and a smallint for the number of units it occupies. The characters are entered correctly, and show as euro signs and Greek letters, but as soon as I do a query, I get the same problem again. The code for the function is below:
      function get_gsm_0338_length(
        text_content in nvarchar2
      ) return integer
      as
        v_offset integer;
        v_length integer := 0;
        v_char nchar(1);
      begin
        for i in 1..length(text_content)
        loop
          v_char := substr( text_content, i, 1 );
          select l
          into v_offset
          from gsm_0338_charset
          where ch = v_char;
          v_length := v_length + v_offset;
        end loop;
        return v_length;
        exception
          when no_data_found then
            return length(text_content) * 2;
      end get_gsm_0338_length;Does anybody have any idea how I can get this to work properly?
    Thanks,
    - Peter

    Well, the person there used a varchar2, whereas I'm using an nvarchar2. I understand that you need the right codepage and such between the client and the database if you use varchar2, which is exactly the reason why I used the nvarchar2.
    However, if I call the function from /Java/, it does work (I found out just now). But this doesn't explain why SQL Developer and Toad are being difficult, and I'm afraid that, because this function is part of a much bigger application, I'll run into the same problem.
    - Peter

  • AirPlay Mirroring doesn't work even with the specified hardware/software

    Hello,
    I have a late 2011 (OS X 10.7.5) MBP and a Sep  2012 Apple TV (MD199LL/A) with the updated software 5.1.
    AirPlay Mirror icon doesn't appear in the menu bar.
    No options/icons or texts related to AirPlay mirroring in System Preferences > Displays either. Checked detect displays, still no.
    Updated all the software in both the MBP and the Apple TV on Oct 6th 2012 late evening/night and restarted both a couple of times, still no signs of AirPlay Mirror icon or option.
    BTW, AirPlay works with iTunes, so I can hear music from MBP on my TV.
    AirPlay Mirroring works with the latest iPad (as of Sep 2012) as well.
    I think one or two people have reported this issue on the forum in response to some question/discussion. Thought it deserved starting a new topic in case some Apple folks are listening.
    Perhaps their adverstising or guidelines need an update to remove references of AirPlay mirroring working with 2011 or newer MBPs. Perhaps they meant 2012 or newer?

    pthompson63
    To be honest I use mine mainly near power and juice up when I can so I don't test the battery too heavily, so I haven't noticed but would probably not.
    If mirror is the only thing you want to do but don't want ML look at third party apps such as airparrot or reflectorapp (I hvae used airparrot and found it OK).
    Jules

  • IPhoto allows iPad's pictures to be seen even with passcode lock.

    Where do I report bugs to?
    I plugged my iPad on and I have a passcode on it. iPhoto opened automatically, tried to read all photos, displayed them, they then disappeared and a box came up saying:
    "Photos in the Camera Roll on "Anthony's iPad" cannot be viewed or imported because the iPod is locked with a passcode.
    (Under that text was:)
    You must enter your passcode on the iPod to view and import them.
    Here's the thing, I've been able to replicate the error over and over and see the pictures on the camera roll with iPhoto by unplugging it and reconnecting the cable.
    I don't feel like having a passcode really protects my iPad from other's eyes, if taken or even sync by someone else if they hook it up the mac.
    Anyone else getting this or can replicate this error? Is this a known bug?
    Tone

    Suicidal wrote:
    Where do I report bugs to?
    I plugged my iPad on and I have a passcode on it. iPhoto opened automatically, tried to read all photos, displayed them, they then disappeared and a box came up saying:
    "Photos in the Camera Roll on "Anthony's iPad" cannot be viewed or imported because the iPod is locked with a passcode.
    (Under that text was:)
    You must enter your passcode on the iPod to view and import them.
    Here's the thing, I've been able to replicate the error over and over and see the pictures on the camera roll with iPhoto by unplugging it and reconnecting the cable.
    I don't feel like having a passcode really protects my iPad from other's eyes, if taken or even sync by someone else if they hook it up the mac.
    Anyone else getting this or can replicate this error? Is this a known bug?
    Tone
    First of all, the Passcode is only 4 digits, so it's like the weakest password out there. If you have MobileMe, you can remote wipe your iPad (and iPhone). I have that setup, even though I don't keep anything private on my iPad.
    As for iPhoto grabbing your photos off of the iPad, I'm not sure what the issue is. It sounds like it's doing what it's supposed to do. You can only sync with one computer. If it connects to a second computer, unless you authorize it, iTunes will ask if it should erase the iPad and restore it as a new iPad.
    Now if I'm missing the real issue here, just post back, and I'll see if I can help.

Maybe you are looking for