Photes turn black when trying to edit w/ adjus sliders.
I can edit about 10% of my photos w/ editing 'adjust' sliders. Remainder turn black.I can often reset and get pic back, the move one or two sliders VERY small amounts. there seems no reason although more often my camera downloads will take editing better than scanned photos. Wonder if that has ANYthing to do w/ editing problems. I get no error messages.
In terms of TD's suggestions....I had this problem before my hard drive died 5 months ago, Had new/upgraded OS, iLife, etc installed and started iphoto library w/ all new photos. Same problem, and it seems as if I can successfully edit fewer and fewer pictures as time goes by.
If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD
Similar Messages
-
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?
If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
IPhoto goes black when trying to edit photos - help!
iPhoto has suddenly decided to go black screen (where the image should be) dark when trying to edit photos. Permissions are fine (read & edit) so that's not the issue (has been offered on mac forums as a solution to this problem in the past). I am on a MacBook pro 2.53 Ghz Core 2 Duo, 4GB 1067 MHz DDR3, NVIDIA GeForce 9400M 256 MB, running OS X Lion 10.7.4 (11E53).
Any help is greatly appreciated in advance.
Thanks!There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Photo's black when trying to edit or name
iPhoto used to work, now does not. I reloaded Mac software recently because I had could not see tutorials about 2 weeks ago, tutorials are fixed, but now I cannot edit or name any photos in iPhoto. For example, I click on a thumbnail of a photo, click on edit, nothing but black. Or click on Name, and it only shows black. I have tried "Rebuild" doesn't work. I'm pretty new to MAC, hope there is someone out there who can help.
Thank you Terence!
I've been googling for weeks with this problem... I've been going round in circles.
Upgraded to Snow Leopard and iphoto 09, when hard drive replaced at authorized Apple shop. (no install disks given)
All photos from a certain date were black screen on edit.
Updated OSX combo
Installed RAW compatibilty
Rebuilt library with iphoto loibrary manager
Used onyx to clean up.
Repaired and verified all permissions
Read and re read all possibilites on every thread
Got very upset every time you cut and paste your usual answer to rebuild with iphoto library manager!
Considered re installing Tiger!
Considered throwing my mac out of the window!
Now for the first time I have seen your post above:
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Eureka! Why didn't I think of that before? I'm sure I did it last week but I've rebuilt the library since then and was sure it was fixed, but it happened again... now I hope this is the end of the BLACK SCREEN FROM ****!
Thanks again TD! I hope I'm not back in this forum again!
Best regards
Emmamani -
Please see question. I have tried uninstalling and reinstalling, but with no success. Chrome and Int. Exp both work fine, but nothing comes up but a black screen covering most of my monitor in Firefix.
Sorry but it is always the other way. Norton needs to update their Firefox extension to work with the new major version Release so it can tie in with their antivirus client.
The good news is that Norton as usual has a live-update patch for Firefox 33.0 which was available on October 13, the day be fore Firefox 33.0 was Released.
*http://community.norton.com/forums/firefox-33-support-norton-toolbar-0
*https://community.norton.com/blogs/product-update-announcements/firefox-33-und-norton-toolbar
As for the black screen it may be due to old graphic drivers
https://support.mozilla.org/en-US/forums/contributors/710777?last=62406#post-62379
start Firefox into safemode '''by pressing the shift key while the application is launching''' & disable Hardware Acceleration in the Firefox ''menu ≡ > Options > Advanced > General'' (You will need to restart Firefox to take effect). -
For years I have had no problems editing photos. However, for some reason when I go to "edit" my photo the photo turns BLACK/BLANK. The editing functions appear but I cannot see the photo. When I select "done" the photo reappears. Why is the photo disappearing for editing? Have I hit a command accidentally that is causing this? Really appreciate someone's assistance.
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions, followed by Option #4, Rebuild Database, if needed.
OT -
After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Black Screen When Trying to Edit Photos
I have the same problem as many others: When trying to Edit a photo, double clicking it creates a normal enlarged screen but this screen is all black. The problem has been raised by many for some time but no solutions have been identified. Should I be surprised that Apple has not yet addressed or even recognize the problem?
what does it mean to right con it?
Sorry - right "click" - fat fingers here
when i try to view photos on full screen, i now get a black screen with a white exclamation point. i view these pictures earlier this year with no problem. please help!
That indicates that iPhoto has lost the connection between the thumbnail and the full photo - if you have not been messing around inside the iPhoto library (you NEVER should do this) then backup and rebuild your library - depress the command and options keys and launch iPhoto - rebuild your library form the last automatic database backup - if that does not fix it use the other options - as a last resort use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to rebuild your library
LN -
Elements 11 organizer has stopped working when trying to edit an album?
Has anyone run into this?
The only place I've had the problem is when trying to edit an album. After it stops working, elements 11 just shuts down.
Operating system is Windows 7 Ultimate.
Thanks...Great.. you figured that out
Just a thought, if you want to continue using Roboform as well as PSE and the two conflict.. you can Add PSE to Roboform's blacklist. That should stop the interaction between the two.
Steps to do so-
If PSE is running, close it now.
In Roboform 7, go to Options / Applications Integration.
Select Add to the Black List (the list of applications RoboForm will not attach to).
Browse to the location of the PSE executable <Organizer in your case, possibly Editor too>
Thanks
Andaleeb -
Why does my screen turn black when I play iTunes while working on iPhoto?
Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
JanThat was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report: 1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
Kernel Extensions in backtrace:
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.GeForce 7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6 -
I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.
At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect. -
For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help
Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.
-
Error Message received when trying to edit page
I have received this following message when trying to edit a site page in SharePoint or in SharePoint designer. I haven't ever seen this error message before and am not really sure what the issue is. I am not the owner of this
particular site but merely an owner of a specific page on this site so I am limited in my ability to troubleshoot but the actual owner is stuck on what the potential issue is and how to resolve this. I manage and own three seperate sites myself and have never
seen this issue so I am trying to assist in any way I can. Any ideas whats the issue?
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(),response filters, HttpModules,
or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.Hi,
We need more information of the issue page. As suggested by Mokhtar, you could check if the issue is related to permission.
The issue might also occurs to the page which is developed based Ajax registration. Then it might be caused by AAM configuration.
And you could also refer to the link below if the issue is related to SSRS:
http://blogs.msdn.com/b/sowmyancs/archive/2012/07/10/ssrs-javascript-error-sharepoint-sql-reporting-services.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Java error when trying to edit file - access denied
We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanksdangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Error when trying to edit page
I get the following error when trying to edit an asp page
"The operation could not be performed because a problem
occurred while attempting to connect to the server. Please check
your internet connection and try again. For more details, please
visit the Incontext Editing Support Center."
If I try and duplicate the page I get:
"The page you are trying to edit or duplicate was loaded with
and error from the server.
Solution: Contact your web developer to correct the problem.
For more details, please visit the Incontext Editing Support
Center."There is a test page here:
http://www.markthomasinfo.com/testice.asp.
I can't edit this file and get the errors I put in my first post in
this thread when I try and do so. I get the same errors with any
ASP file I try and edit.
I can however edit this simple html file successfully:
http://www.markthomasinfo.com/testincontext.html
The ASP page is very simple, here's the code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:ice="
http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>Untitled Document</title>
<script src="includes/ice/ice.js"
type="text/javascript"></script>
</head>
<body>
<p>TEST ASP FILE</p>
<div ice:editable="*">Content for new Editable Region
goes here</div>
</body>
</html>
Maybe you are looking for
-
i really need help with that
-
How to clear the recent SAVE locations menu
When I save a new document, a menu of locations appears where I have recently saved other documents. How can I clear this menu? Clearing the Recent Items menu doesn't do it. I must have inadvertently saved a file to my backup drive once, because the
-
How to unlock memory card nokia 5310
i just updated my nokia 5310 firmware from 5.81 to 8.32 and now my memory card has locked itself. can anyone help with this? does anyone know the code?
-
Production - Multiple Bills of Material for a FG Product
Hi, In SAP B1 - It is not possible to create multiple Bills of Materials for a FG product. Is there any workaround to address this issue? At our location we have multiple alternative combinations of components which can be used to create the same FG
-
Old connections not showing on Discoverer Connections page after a REFRESH
Hello all, I am having a weird issue with Discoverer connections after a recent refresh of our DEV AS environment from TST. Before I proceed further, let me give you some details on our environments. We have recently upgraded our version 9.0.4.1 AS D