Photo and Contact manager for Windows Vista
I have a Mac but, was helping some people I know set up their iPod Classic and was wondering what Photo and Contact manager on a PC is used to sync to Windows Vista.
Thanks,
Barry
I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff
Similar Messages
-
Power Manager for Windows Vista - ThinkPad
The link show the update is for a T61p, running Vist,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM -
So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?
If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups -
HP Backup and Recovery Manager for Windows 7
I installed all the softwares and drivers that came along with the HP upgrade DVD. But, I find that the Backup and Recovery Manager missing on the DVD. Is there a Backup and Recovery Manager for Win 7? I liked the backup and recovery manager that was available on my Vista when I bought this laptop but is now unavailable because of the upgrade!! Any solutions for this? I do not want to use the default Windows Backup as I do not have a separate HDD at the moment to store the backup there and do not wish to populate my local hard disk with backup data!! Thanks.
This question was solved.
View Solution.Yea, basically. There's no working program for your laptop so it seems that you can use from within Windows 7.
However, if you have problems, recovery discs will work. As well, if your recovery partition still exists, you can still access it by pressing F11 when you see the HP logo at startup. -
Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista
I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error. The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager. Dow anyone have a solution?
I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff -
Forms 6i and Reports 6i for Window Vista
Dear!
How can I find out the software of Oracle Forms 6i & Oracle Reports 6i & Oracle Database 9i which supports Windows Vista 32-bit Edition.
Please Helpme...Paul M. wrote:
Why so old (and desupported) products ?Because they work?
I've known sites that don't upgrade until the version they're upgrading to is desupported - at that point it's mature and has almost all the bugs found and either fixed or workarounds identified.
Another possibility is that their application relies on features of client/server, and 6i is the last client/server version.
We're still using Forms 6i for a combination of those two reasons. Client/Server will rise again! After all, dumb terminals have made a comeback (sorry, it's called webforms these days).
:) -
How to create Rescue and Recovery disc for Windows Vista Home Basic with G530 Lenovo Laptop?
Hi All,
I have purchased G530 Lenovo laptop 2 weeks back.
I coudn't find installation/recovery discs in my laptop box.
I went across the forums and came to know that it is not available now-a-days as it was coming previously.
So, anybody can help me, how to create a recovery disc?
This is needed when I format my laptop.
Thanks in advance.
Regards,
Umesh.Click on what used to be the "Start" button and search for "create" or "recovery". It took me a while to find it but it is there.
Use a cd for the first disc and 2 DVD's for the other discs.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply. In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer. -
Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.Uninstalling the iCloud control panel should allow you to do that folder deletion.
-
hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.davidI second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
BDB support for Windows Vista, WIndows 7 and Windows Server?
Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
AkiraYes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB -
Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTechYou could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognised can anyone help
See this:
iPhone and iPod touch: Unable to restore -
I can sync my contacts but not my calender with iphone 4 and outlook 2007 for windows XP. It was working OK up to a month ago
I found this link:
http://xlii.be/2011/10/how-to-get-icloud-windows-xp-and-outlook-to-work-together /
Hope it helps some other noobies like myself.
Maybe you are looking for
-
Run shell commands using java program
Hi guys, I am trying to run shell commands like cd /something and ./command with arguments as follows, but getting an exception that ./command not found.Instead of changing directory using "cd" command I am passing directory as an argument in rt,exec
-
Above kind of says it all, except lasy=last. When I open a new tab it goes to my home page. It also does it with private browsing as well, Christmas shopping secretly doesn't work when the wif opens the computer after me and sees were I was.
-
XML Forms: Multiple Object-Browser
Hello, within the Form the user can add a link to a document using the Browser-Control. Is it possible to add then another Browser-Control to add an additional link. And if he add this link, to show another one, and so on? kind regards, Marco
-
After attempting to install the Reader update, the software is non-functional. Attempts to re-install produce a system error. I cannot uninstall and there does not appear to be a repair function Is there an easy way to fix this? I have Acrobat,
-
Setting Euroscale Uncoated v2 as CMYK preset in CS3
Hi, As a preset, in colour settings, i want my CMYK profile to be Euroscale Uncoated v2, but it doesn't appear in the drop down menu. Any ideas of how to get it?