Photo appearance changes after being placed

I hope someone can please help me
Im using CS4 and creating a magazine I have the
Display at High Quality
And I am trying to Place 314 DPI Tiffs
that I have created in photoshop.
They are high quality images and they look PERFECT on photoshop.
I will attempt to put 10 photos of a model on 10 pages and 9 will work out perfect, at least 1 always comes out less then perfect.
I wont say totally pixelated but it look like a picture would look if you sharpened it way to much.
Every photo is saved the same and the same DPI and all of the others will look fine.
And its funny when I scroll over to the photo and my mouse is pressed on the scroll bar is I pass that photo it will look perfect and when I let go of the scroll bar it goes back to looking aweful.
But I see it perfect in photoshop and also in indesign when i scroll to it then before my eyes it changes back to a horrible photo.
Im so scared it will print in the horrible form, although I know its a good photo.
What am I doing wrong? how can i get the occasional messed up photo to show clear.
Im using Indesign CS4
in CMYK
the Tiffs are 314DPI
im placing them and making a photo box first neither way works.
Thank you very much
Mer

Ken,
In this particular case I was thinking Printing might be more instructive than Exporting to PDF, but it probably doesn't make a lot of difference, and Exporting is certainly less complex.
If you decide to print, there are two important things to do: First, and this applies to any printing, not just to PDF, change the "Send Data" field in the Graphics section from the default, "Optimized Subsampling," to "All." Second, for Printing to PDF you should click the setup button in the bottom of the print dialog and choose the PDF printer, then click preferences. On the PDF settings tab make sure the default setting is for Press Quality or High Quality Print.
If the preview is behaving erratically and the view settings are correct, I'm thinking it may be a video driver problem or perhaps corrupt preferences.
To test the video driver click a blank area of the desktop and choose Properties > Settings >Advanced button > Troubleshooting tab and set the Hardware Acceleration slider to none. If that solves the problem, look for an updated video driver.
To replace your preferences see: http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f8617383751 001ea8cb3f-6d1e.html

Similar Messages

How do I stop my original photo from changing after I edit then save it in Raw 7

How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
Thanks for your help

Thanks for this great solution NoelHave a great day and weekend
Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png -Noel

Saved messages re-appear months after being sent

Yesterday 101 messages "suddenly" re-appeared in my DRAFTS folder. Several of the 101 messages were repeats so the number of unique messages was smaller.
I can identify a few of these as messages I took a long time to compose - so there may have been a "proper" save in DRAFTS in these cases.
I resent a copy of each of these messages to trusted correspondents - a few were newly received and several were duplicates.
Questions:
1. Why now? This is a new problem, I routinely look for "next" when I near the end of my inmail processing, this time the DRAFTS folder showed up with over 100 messages.
2. How do I tell, short of scanning the SENT or respective folders, if the mail was sent.
3. Since the problem took months after some of the original messages were sent, how do I just make it go away - and be sure the messages I send are actually sent.
NB: The problem is nearly identical to a "reported and closed/fixed" problem in Microsoft Office Outlook 2010. That problem was closed with a fix to Internet Explorer - could that be related?
Thank you. /Stu

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

Scanned photo appears striated after selected and pasted into new photoshop file.

Hey Everyone,
I was wondering how to select a photo from a scan. I used the various selection tools and then copied and pasted the photo into a new photoshop document ane the scan appears striated and strange. Is there something I'm doing incorrectly?
Thanks in Advance!

I scanned it in at 300 dpi. I didn't change it from RGB to CMYK. I am scanning the photos for the purose of a video which I was going to convert it ot 72 dpi later. I'm also planning to archive these photos hence why I scanned them in at 300 dpi and saved it as a tiff file. I scanned several photos at once. I didn't use the crop and straighten option because the photos are from the 70's and the edges are rounded. I wanted to maintain that look so I used the pen tool to get a decent selection. For kicks and giggles, I tried copying and pasting a screen shot I took and the same striation occured. I then downloaded a picture from google images and copied and pasted it and the same thing happened. Could there be something wrong with my program? I have all the updates for it. Also, when I rotate the images the opacity changes and I get columns appearing on the photo.
This isn't the photo I scanned but the fact that it was scanned doesn't seem to matter. There seems to be something wrong with my program. I used an older version of photoshop elements I have with no problem, but for many reasons I don't really want to use elements. I hope this helps. Thanks

Photo quality change after exporting

Hello
I'm working on a short film project that should be made from photos not videos (so photos are critical in this iMovie project), but after exporting the movie ( in HD) I found out that the photos' quality were reduced?
Most of the photos are darky, with dark backgrounds, they look good enough in iMovie but after exporting they look lighted up, which ruins my movie.
What should I do??
Thanks in advance

That is odd, I have not been aware of any drop in camera quality via an update with this model. With this being the case I would advise running the update again and choosing the "Repair" option.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Deleted Photos appear again after iPhoto-Restart

Hi,
I am using a large iPhoto-Library from a Samba-shared directory. This works fine for a long time.
I just realised that deleting of photos and events seems to be buggy:
1. When tragging a Photo to iPhoto-trashbin in still appears as an events, but also in the trashbin. When deleting the content of the trashbin the event disappears
2. The crasy thing is is appears again when reloading the app
rebuilding of caches or anything doesn't help. I tried out a lot
I checked out in the finder: The picture was never deleted from its original folder. I deleted it manually. Now the thumbnail appears, but the white '?' comes up, when opening the picture
Anyone having the same probem?

Hi,
I am sorry that I was asking a question that was obvious to everyone.
As I didn't found a solution to make a MacOsExtended Journaled filesystem on ubuntu to mount and share it with samba or nfs (HFS+ seems to be quite similar, but cannot be mounted rw) it tried something different:
Instead of shareing the mounted filesystem through TCP/IP I am shareing the block-device now. I found an mac app that allows to act as iscsi initiator. To set up an LVM on ubuntu and make it in iscsi-divice is easy. Until now this works quite nice. I guess I will be able to use Timemachine though this mechanismn as well.
I would like to suggest something to the apple-developers:
It would be great to have a feature in iPhoto allowing use a local and a server-library. The local library only shows the Photos of the last 12 month or so, but the thumbnails of everything. Everytime you connect your server an automatic sync to the server library (containing everything) is done.
Thanks a lot

Photos appear dark after importing into iPhoto

I am having an issue importing photos into iPhoto 6. When I download photos from my digital camera (Canon Rebel XTi) they view perfectly in Preview.app. Once I import them into iPhoto they all appear dark, however I can open the photo file from the iPhoto directory with Preview.app or even Photoshop and they appear fine. Any suggestions?
Intel iMac 20" 2.16 GHz Mac OS X (10.4.9)

The images appear to be darkened as if they were taken in low light or overly saturated colors in iPhoto only. I can open them in Photoshop or Preview.app and they look as they should. The camera is using sRGB Profile. The option for iPhoto to add a ColorSync profile is off. I get the same results with this features on or off.

Photos are cropped after being shared from Photos App

So, I wanted to share Photos from my Photos App using iCloud shared albums. I have iCloud Photo Library enabled.
All the photos I want to share are perfectly uploaded to iCloud, as I checked them on my iPhone.
But when I created the shared album, some of the photos are cropped! The lower part is just plain white.
Some of them are missing 30%, others are missing 90%. Some are even all white. This is the case for every device I access the shared album from.
But the originals are still complete and not cropped (When I access them via "Moments" for example). That is on every device!
No matter where I access
I noticed, that when I shared the photos, the Hard drive of my iMac began to show heavy activity.
I imagine there should be no HD activity, since all my photos are in the cloud already. So when I want to share photos from my iCloud photo library, all the Photos App has to do is send the list of those photos I want to share to the iCloud servers. Not the entire (or corpped) photo.
Anyone else experiencing this?

Must crop all pictures, or choose to print with borders.

Delivery Date changed after order placed, iphone 4S

Hi all,
I just noticed that the order I placed on the 12th, with a delivery date of the 21st , is now stating a delivery date of the 28th!! I called CS and of course they are saying there is nothing they can do. Has anyone else had this happen? Any suggestions?
It is quite disappointing, Verizon should of never promised delivery dates if they could not meet them. Thanks!

Check your local stores and see if they have any in stock. If so, cancel your order and go pick one up in store. If you look at the Apple site to order you'll notice that (at last check) the shipping is 1-2 weeks out so that's a pretty good indicator that demand was high. This would explain why your order date was pushed back. It happens all of the time. It sucks but it's bound to happen when something is selling very well.

Text appearance changes after zooming in

When I open a certain PDF in Acrobat (I used Acrobat 9.3.4), a character is broken in the middle (a piece of the character is missing). When I zoom in heavily, e.g. up to 600% or higher, the character will built up normally again.
I tried a few other PDF viewers, but the problem only seems to show in Acrobat. In production this PDF was rendered on a APPE RIP. Depending on the output resolution the problem would occur (printed, output resolution 600dpi) or not occur (platemaking: output resolution: 2540dpi). The font seems to be a regular PS Type 1 font (fully embedded).
Has anyone experienced similar kind of problems? What I would like to know is if I'm dealing with a font problem here or with an Acrobat / Adobe APPE issue (problems with rendering certain fonts at a certain resolution to screen, to output devices)?

Since apparently my pictures seem to have disappeared:
zoom_400.jpeg:
zoom_600.jpeg:
So I assume it is an Acrobat problem then. Still strange though that is also appeared in the RIP (does Acrobat use the same PDF library or engine as the APPE to render PDF's)?
Thanks for the feedback BTW!

Red bar above image after being placed into Timeline

I imported a .JPG image from my Canon DSLR into CS5.5 and when brought into the Timeline it is displaying the red bar above it. Why is this? I'm guessing this means it needs to be rendered. However, it seems to be playing it. What are the issues, if any with having images with the red bars above them?
Thanks.

I am wondering why a still .jpg photo requires rendering?
The reason for this is that PrPro is "creating" Video from your Still Image. For ultimate playback, that will need to be Rendered, which basically creates a "proxy" Video file, to display at ultimate playback quality.
Unless I have done animation with Keyframed Effects on my Still Image, I seldom bother to Render my SlideShows, as I can usually play the Timeline with adequate quality. However, if I have done the animation, then I might Render many times, as I adjust my Keyframes.
Good luck, and hope that helps,
Hunt

Switch ports did an up/down sequence after being placed in etherchannel with no cables connected, wierd.

Hi Everyone
I created an etherchannel on two ports (2960 switch) and placed them into an etherchannel. Did the same on the other switch Cisco 3020 blade chassis switch. Without connecting any cables the 2960 had done an up/down sequence as though a cable had been connected and yet this had not been done. Can someone try and help with what could be the technical explanation of this interesting phenomena. the etherchannel was a trunk and the ports were sitting in vlan 200 and this vlan was also configured as the native vlan for the trunk.
Please, please help - any comment is appreciated.
Sydney

Hi EveryoneI
created an etherchannel on two ports (2960 switch) and placed them into
an etherchannel. Did the same on the other switch Cisco 3020 blade
chassis switch. Without connecting any cables the 2960 had done an
up/down sequence as though a cable had been connected and yet this had
not been done. Can someone try and help with what could be the
technical explanation of this interesting phenomena. the etherchannel
was a trunk and the ports were sitting in vlan 200 and this vlan was
also configured as the native vlan for the trunk.Please, please help - any comment is appreciated.Sydney
Hi Sydney,
It can be possible that speed and duplex setting between the switches are not in sync. Configure all interfaces in an EtherChannel to operate at the same speeds and duplex modes.Enable all interfaces in an EtherChannel. If you shut down an interface in an EtherChannel, it is treated as a link failure, and its traffic is transferred to one of the remaining interfaces in the EtherChannel.
For EtherChannels:
–Assign all interfaces in the EtherChannel to the same VLAN, or configure them as trunks.
–If you configure an EtherChannel from trunk interfaces, verify that the trunking mode (802.1Q) is the same on all the trunks. Inconsistent trunk modes on EtherChannel interfaces can have unexpected results.
–An EtherChannel supports the same allowed range of VLANs on all the interfaces in a trunking Layer 2
Hope to help
If helpful do rate the post
Ganesh.H

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

Photos remain in wrong iPhoto list even after being moved?

+Mike G.+
+Posts: 297+
+Registered: 15-Nov-2004+
+ Photos remain in wrong iPhoto list even after being moved?+
+Posted: 29-Jan-2009 16:56 +
Hi,
+Has anyone else had this problem? Any workarounds?+
+I have a number of pictures that just show up in the wrong place in Places' list view, but I cannot seem to move them. For example, a photo will show up as being in state X in city Y when it was actually taken at a "Place" in state A, city B. So I click on the photo, hit command-i, type in the name of a place in A/B, and hit done. (Pressing command-i again shows the new name and a pin in the correct place.) However, the photo still shows up when I select state X and city Y from the places browser. This persists even after restarting iPhoto.+
+Any ideas?+
+iMac (Mid-2007) Mac OS X (10.5.6)+
+Mike G.+
+Posts: 297+
+Registered: 15-Nov-2004+
+ Re: Photos remain in wrong iPhoto list even after being moved?+
+Posted: 16-Sep-2009 16:30 in response to: Mike G. +
+Does not seem to be an issue with the latest version of iPhoto.+
Im not sure why this has been closed as it is an issue for me as well,
eg, Trafalgar Square photos appear in the London Eye pushpin, but when checking the photos individually they are correct.
I am fully up to date with my software and this issue only appears to have raised itself on the latest version of iphoto (8.1 (415))
Removing the locations and re-adding them does not fix the issue you just end up with the same result or a different mixture of incorrect pictures in the push pins.
Message was edited by: Carn

The best way to get assistance on the forum is to provide a clear and detailed description of the problem and report any steps you've already taken to solve the issue and anything that resulted therefrom.
Im not sure why this has been closed as it is an issue for me as well,
It's been closed because the User who had this issue found a solution. Only the person who creates the thread can close it. This person had no idea you even existed, let alone that you might have a similar issue. I'm sure if he had he'd have left it open, just waiting for you to come along.
Is not a resolving answer to the issue and appears to be a very narrow minded approach to resolving issues!
Let's see. Someone has an issue. They create a thread on the forum. They find a solution. They mark the thread as answered. This is narrow minded?
Regards
TD

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub?

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub? I work on a PC not a mac and have done everything described in tutorials. OAM animations are not working. please help.
Thank you.
Kathy

This discussion explains the whole issue. Nothing has changed since it was written:
How to add Edge Animate Web Publish to FL EPUB 3 for iBooks.

Photo appearance changes after being placed

Similar Messages

Maybe you are looking for