Photo Attachments not Displaying in Gmail

I'm using an iPod touch 3rd Gen 32GB to check my Gmail over wifi. I received an email with two photos today and the photos are not displaying on the iPod. I see a question mark in the center of the space for the photo. I can't find any settings for this. But, I'm new to this so i may be looking in the wrong place. Any suggestions to get this to work?

Hi All,
I am facing the same issue w.r.t Photo Display in MSS General Information.
Whenever i logged into MSS General info its asking ECC system Credentials to Display the Photo.
it showing the Error like
SAP ArchiveLink: Data Element for Absolute URI
can you please give me the solution
Earlier its asked me the credentials in ChangeOwnData - PhotoDisplay, but after FQDN,its not asking any Credentials. Photo is Displaying fine in COD Service in ESS.
Please suggest me the solutin for Credentials asking in Photo Display in MSS..
Thanks in Advance
Adapag

Similar Messages

Photos/Attachments Not Displaying in Messages

Last week I updated my OS from Mountain Lion to Mavericks on a MBA. I can view all my sent photos but not the ones I received. The images have been replaced with bubbles like this:
If I double click on the bubble the image appears. The attachments are located were they should be in the ~/library/messages/ attachments folder. Being that both incoming and outgoing attachments are stored in this folder it seems strange that Messages would display one catergory and not the other.
I've signed in and out of my icloud account to no effect. Is there a way to restore the link between the app and it's attachment folder or do I need to restore the app itself? And if I restore will I risk losing messages?
Thank you,
Guy

Hello, Guy G.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Jason H..

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Navigation & Photo Page not displaying within some browsers

Hello,
I am using iWeb '08 and am having great difficulties trying to get my site cross browser compatible. The site is working perfectly on the Mac in Firefox 2 & Safari but not Firefox 3. It is also not displaying correctly in Firefox 2.0.0.13 and IE7 on my WinXP machine. Unfortunately the error is not just a cosmetic issue. The Main Navigation is not displaying on any page and only shows a bullet point where it is meant to be. The other error occurs in the Photo Template and the photos are not displaying. I am using a "Version 1 template" and did a test with a "version 2" template that provided the same errors.
Has anyone else had these problems???
The site is located at:
http://web.mac.com/maxkit/Kai/
Photo Page:
http://web.mac.com/maxkit/Kai/CurrentPictures/Pages/Snowy_AprilDay.html
The test site is located at:
http://web.mac.com/maxkit/Site/
Thanks
Max

You have applied a height of "auto"to your menubar container, which gives it no height at all in some browsers. If you have a clue what height you would like to display for your menubar, give it, instead of:
    <div style="height: auto;" id="p7PMM_1" class="p7PMMh04">
Better yet, leave it in the CSS file, where you will find it when you go looking for it. You already assign a height there:
.p7PMMh04 {
    width: auto;
    height: 20px;
    margin: 0 auto;
    font-family: Arial, Helvetica, sans-serif;
    font-size: 11px;
    font-weight: bold;
    background-image: url(http://home.roadrunner.com/~jgigandet/trinity/img/new_bk.gif);
    background-repeat: repeat-x;
    background-color: #000;
    text-align: left;
    line-height: normal;
Because your inline style of height:auto; has more proximity (is closer) to the element being styled, it overrides the style in the stylesheet and applies the height: auto; instead of allowing the height: 20px;
Beth

My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine. All file types, Lightroom is no longer recognising the images to import, The panel that usually displays them remains empty. Try using backup versions, removing software that could conflict , still no joy, has anyone had this problem?

Did you follow this procedure?
Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

ESS- Employee Photo is not displaying.

Dear All,
Employee photo is not displaying in Who's who application of Employee search.
By right click help gone through the Properties.
It is giving message that..
"800?get&pVersion=0046&contRep=Z2&docId=E135E81A75C422F1B0B95CF3FC94086E&accessMode=r&authId=CN%3DPR1,OU%
3DI0020259918,OU%3DSAPWebAS,O%3DSAPTrustCommunity,C%3DDE&expiration=20120104085649&secKey=MIIBUgYJKo
ZIhvcNAQcCoIIBQzCCAT8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAR4wggEaAgEBMG8wZDELMAkGA1UE
BhMCREUxHDAaBgNVBAoTE1NBUCBUcnVzdCBDb21tdW5pdHkxEzARBgNVBAsTClNBUCBXZWIgQVMxFDASBgNVBAsTC0k
wMDIwMjU5OTE4MQwwCgYDVQQDEwNQUjECByARBQkJWFkwCQYFKw4DAhoFAKBdMBgGCSqGSIb3DQEJAzELBgkqhkiG
9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTEyMDEwMzA4NTY0OVowIwYJKoZIhvcNAQkEMRYEFOB%2Fx7LoOChOjGW3iIGG
FxjjpJkMMAkGByqGSM44BAMELzAtAhRpHueDstxejUkJ0F2j7PNmxPu5xQIVAILHJcNOP7pvx%2BbPVgmDX%2F5Osaby"
here 800 is client number and Z2 is the content repository name.
also
http://<Host>.xxxxxxxxx.com:<port>/sap/bc/contentserver/800?get&pVersion=0046&contRep=Z2&docId=E135E81A75C422F1B0B95CF3FC94086E&accessMode=r&authId=CN%3DPR1,OU%
3DI0020259918,OU%3DSAPWebAS,O%3DSAPTrustCommunity,C%3DDE&expiration=20120104085649&secKey=MIIBUgYJKo
ZIhvcNAQcCoIIBQzCCAT8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAR4wggEaAgEBMG8wZDELMAkGA1UE
BhMCREUxHDAaBgNVBAoTE1NBUCBUcnVzdCBDb21tdW5pdHkxEzARBgNVBAsTClNBUCBXZWIgQVMxFDASBgNVBAsTC0
kwMDIwMjU5OTE4MQwwCgYDVQQDEwNQUjECByARBQkJWFkwCQYFKw4DAhoFAKBdMBgGCSqGSIb3DQEJAzELBgkqhki
G9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTEyMDEwMzA4NTY0OVowIwYJKoZIhvcNAQkEMRYEFOB%2Fx7LoOChOjGW3iIG
GFxjjpJkMMAkGByqGSM44BAMELzAtAhRpHueDstxejUkJ0F2j7PNmxPu5xQIVAILHJcNOP7pvx%2BbPVgmDX%2F5Osaby
Please help to solve this.
Regards,
Potru.
Edited by: N Potru on Jan 3, 2012 10:21 AM

Hi Siddharth,
http://yyyy.xxxxxxxxx.com:8000/sap/bc/contentserver/180?get&pVersion=0046&contRep=Z2&docId=E141FAA8EA53BEF1B0AF00145E190D9D
When I right click on that Place system is giving this error.
I have maintained number ranges for photo upload. I have uploaded 3 photos and checked the number range but it is showing current number as 0. means no number is generating from the number ranges.
Thanks,
Potru.

ICamera photos are not displayed in iPhoto

HI!
I have a big problem: Whan I make photos with the included camera in my iPad,
these photos are not displayed in the iPhoto app supplied with my iPad. I can't find
them.
I'm using IOS 5.0.1.
Any help? PLEASE!!!

After you snap the photo with the iPad, and that picture shrinks down to the corner, you should ba able to tap that little picture - and it should open in the Camera Roll in the Photos app.
I'm not sure what to suggest other than the basic, first try, troubleshooting steps.
Quit the camera app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Photos does not display generic title of image (ex: IMG_2234) as actual title. Is there a way to batch rename all photos using the generic title?

Photos does not display generic title of image (ex: IMG_2234) as actual title. Is there a way to batch rename all photos using the generic title?

If you launch Script Editor and open the Help menu, you will see the APpleScript Help and a Language Guide:
To see, which commands an application understands, open the File menu in Script editor and select Open Dictionary. In the list locate "Photos".
You will see examples how o script Photos.

Sending photo attachments from Mail to Gmail

I've been sending photo attachments via Mail for years and haven't had trouble until recently. Now I'm getting complaints from Gmail users that the attachments come through as embedded files. I guess on the Gmail end, they don't see it listed out as an attachment, but as part of the mail body. What's going on here?
I attach files same as I always have - by clicking on "attach", then selecting the file(s) I want to attach. I always leave "send windows friendly attachments" selected (although in an experiment, I tried sending it without clicking that, and the images came over all stretched out and shrunken in a very strange way).
I can't think of what would be happening, but I'm assuming it's something in either the way Mail or Gmail is treating the photos - and I'd like to have them come through as attachments, rather than embed files (I'm a photographer and have heard from some of my clients that the embed is a pain - they have to "save as" right click on each image rather than just select "save attachments" or something).
Any ideas??

Send to these recipients using only Plain Text, and all should be well. To test choose a message you previously sent from the Sent mailbox, open, click on Message in the menubar, choose Send Again, then click on Format and choose Make Plain Text.
Rich Text as received by those using Outlook or Outlook Express, as two examples, will see the RTF as HTML, and the attachments will appear embedded -- although they are not.
Ernie

Case attachments not displayed using PCUI CRMD_CASE

Hi all,
We´ve developped an WDA in order to create cases in case management, using BAPI
BAPI_CASE_CREATE, developped as follows:
call function 'BAPI_CASE_CREATE'
    exporting
      case_type              = gc_zcas
    importing
      guid                   = lv_guid
    tables
      return                 = lt_return
      case_attributes        = lt_attributes
      case_notes             = lt_casenotes
      case_note_ids          = lt_casenotesid
      element_identification = lt_identifi
      element_insertion      = lt_insertion
      element_relations      = lt_relations.
call function 'BAPI_TRANSACTION_COMMIT'
    exporting
      wait = 'X'.
On this web dynpro we´ve also created a file upload field in order to attach a document to the case created previously, using method "m_insertar_adjunto".
Method call uses the following parameters:
wd_this->m_insertar_adjunto(
                                  guid     = lv_guid
                                  content = ls_adjunto-filecontent
                                  filename = ls_adjunto-filename
method m_insertar_adjunto .
data: l_folid type soodk,
        l_folderid type soobjinfi1-object_id,
        l_size type i,
        lt_content type table of solisti1.
data ls_content like line of lt_content.
data: ls_document_data type sodocchgi1.
data: l_doctype type soodk-objtp.
data: l_docinfo type sofolenti1.
data: lt_words type table of string,
        l_token type string.
data: l_att_key type swotobjid-objkey.
check content is not initial.
call function 'SO_FOLDER_ROOT_ID_GET'
    exporting
      region                      = 'B'
     importing
      folder_id                   = l_folid
    exceptions
      communication_failure       = 1
      owner_not_exist             = 2
      system_failure              = 3
      x_error                     = 4
      others                      = 5
l_folderid = l_folid.
call function 'SCMS_XSTRING_TO_BINARY'
    exporting
      buffer          = content
      append_to_table = 'X'
    importing
      output_length   = l_size
    tables
      binary_tab      = lt_content.
data: lc_word(100).
l_token = filename.
while l_token ca ''.
    split l_token at '' into lc_word l_token.
endwhile.
split l_token at '.' into lc_word l_doctype.
ls_document_data-obj_name = l_token.
ls_document_data-obj_descr = 'Adjunto Caso'.
ls_document_data-obj_langu = sy-langu.
ls_document_data-doc_size = l_size.
ls_document_data-no_change = 'X'.
call function 'SO_DOCUMENT_INSERT_API1'
    exporting
      folder_id                  = l_folderid
      document_data              = ls_document_data
      document_type              = l_doctype
    importing
      document_info              = l_docinfo
    tables
      object_content             = lt_content
    exceptions
      folder_not_exist           = 1
      document_type_not_exist    = 2
      operation_no_authorization = 3
      parameter_error            = 4
      x_error                    = 5
      enqueue_error              = 6
      others                     = 7.
l_att_key = l_docinfo-doc_id.
data: object_a type sibflporb,
        object_b type sibflporb.
object_a-instid = guid.
object_a-typeid = 'BUS20900'.
object_a-catid = 'BO'.
object_b-instid = l_att_key.
object_b-typeid = 'MESSAGE'.
object_b-catid = 'BO'.
try.
call method cl_binary_relation=>create_link
    exporting
      is_object_a = object_a
      is_object_b = object_b
      ip_reltype = 'ATTA'.
endtry.
if sy-subrc eq 0.
    commit work and wait.
endif.
endmethod.
Our problem is the following: when we ONLY use PCUI CRMD_CASE (case management) something goes wrong, because case is displayed but its attachments do not appear.
The behaviour is not the same if you display case in GUI or in PCUI; even if you enter firstly in CRM GUI and afterwards in PCUI, the behaviour changes; the possibilities are the following:
1 --> Using CRM GUI (only) case and attachments are displayed right.
2 --> Using PCUI CRMD_CASE (only) and not entering previously on CRM GUI, case is displayed right but its attachments are lost.
3 --> If you enter CRM GUI firstly to see case and attachments and entering PCUI CRMD_CASE afterwards, everything (case and attach) is displayed right.
It seems that something is refreshed in database when you enter in CRM GUI and this is exactly what allows system to show rightly in PCUI.
We don´t know how to solve the problem.
Could anybody help us to solve this issue?
Thanks in advance.
Carmen Rodriguez

Hi Carmen,
You can use FM ZGI_CREAR_ADJUNTO_CASO to solve your problem.
FUNCTION ZGI_CREAR_ADJUNTO_CASO.
""Interfase local
*" IMPORTING
*"     REFERENCE(GUID) TYPE BAPISCMGCASE-CASE_GUID
*"     REFERENCE(FILENAME) TYPE STRING
*"     REFERENCE(FILECONTENT) TYPE XSTRING
Variables
data: lv_business_object type sibflporb.
data: ls_new_phio    type skwf_io,
        ls_new_loio    type skwf_io,
        lv_error       type skwf_error,
        lv_size type i.
data: lv_doctype type soodk-objtp.
data: ls_document_data type sodocchgi1.
data: lt_filecontent type table of sdokcntbin .
data: lv_retcode     type sy-subrc.
data: lv_objkey      type swo_typeid.
data: ls_fileinfo   type sdokfilaci,
        lt_fileinfos type table of sdokfilaci.
data: ls_file_info type crmt_icss_file_info.
data: lt_loio_properties type table of sdokpropty,
        lt_phio_properties type table of sdokpropty.
data ls_property        type sdokpropty.
data: lv_length type i.
data: lv_file(1200),
      lv_dir(1200),
      lv_delimiter        type c,
      lv_offset           type i,
      lv_bytes            type i,
      lv_delimiter_offset type i,
      lv_delimiter_bytes type i,
      lv_char             type c,
      lv_previous_char    type c,
      lv_last_char        type c.
check filecontent is not initial.
class
class cl_kwui_utilities definition load.
Binary
call function 'SCMS_XSTRING_TO_BINARY'
    exporting
      buffer          = filecontent
      append_to_table = 'X'
    importing
      output_length   = lv_size
    tables
      binary_tab      = lt_filecontent.
file name
lv_length = strlen( filename ).
lv_offset = 0.
while lv_offset < lv_length.
Remember last character
    lv_last_char = lv_char.
    lv_bytes = charlen( filename+lv_offset ).
Get current character
    lv_char = filename+lv_offset(lv_bytes).
    if lv_char = '/' or
       lv_char = '' or
       lv_char = ':'.
      if lv_delimiter is initial or
         lv_delimiter = ':'.
        lv_delimiter = lv_char.
      endif.
      if lv_char = lv_delimiter.
        lv_delimiter_offset = lv_offset.
        lv_delimiter_bytes = lv_bytes.
      remember character in front of delimiter:
        lv_previous_char = lv_last_char.
      endif.
    endif.
    lv_offset = lv_offset + lv_bytes.
endwhile.
if not lv_delimiter is initial.
    lv_offset = lv_delimiter_offset + lv_delimiter_bytes.
    lv_file = filename+lv_offset.
    if lv_previous_char = ':' or lv_delimiter = ':'.
    path ends with or after drive identifer, include the delimiter
      lv_dir = filename(lv_offset).
    elseif not lv_delimiter_offset is initial.
    do not include a trailing delimiter for compatibility reasons
      lv_dir = filename(lv_delimiter_offset).
    else.
      clear lv_dir.
    endif.
else.
    lv_dir = space.
    lv_file = filename.
endif.
PHIO
Description
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_description ) is initial.
    ls_property-name = skwfc_prop_description.
    ls_property-value = 'Adjunto Caso'..
    append ls_property to lt_phio_properties.
endif.
Link name
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_relative_url ) is initial.
    ls_property-name = skwfc_prop_relative_url.
    ls_property-value = lv_file..
    append ls_property to lt_phio_properties.
endif.
Language
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_P_CASE' p_property = skwfc_prop_language ) is initial.
    ls_property-name = skwfc_prop_language.
    ls_property-value = sy-langu.
    append ls_property to lt_phio_properties.
endif.
*LOIO
Description
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_description ) is initial.
    ls_property-name = skwfc_prop_description.
    ls_property-value = 'Adjunto Caso'..
    append ls_property to lt_loio_properties.
endif.
Link name
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_relative_url ) is initial.
    ls_property-name = skwfc_prop_relative_url.
    ls_property-value = lv_file.
    append ls_property to lt_loio_properties.
endif.
Language
if not cl_kwui_utilities=>property_is_modelled( p_class = 'CRM_L_CASE' p_property = skwfc_prop_orig_language ) is initial.
    ls_property-name = skwfc_prop_orig_language.
    ls_property-value = sy-langu.
    append ls_property to lt_loio_properties.
endif.
create the document itself
clear lv_error.
clear ls_new_phio.
clear ls_new_loio.
clear lv_objkey.
call function 'SKWF_LOIO_WITH_PHIO_CREATE'
    exporting
      loio_class      = 'CRM_L_CASE'
      phio_class      = 'CRM_P_CASE'
    importing
      error           = lv_error
      phio            = ls_new_phio
      loio            = ls_new_loio
    tables
      loio_properties = lt_loio_properties
      phio_properties = lt_phio_properties.
if lv_error is not initial.
    exit.
endif.
file information
ls_fileinfo-file_size = lv_size.
ls_fileinfo-binary_flg = 'X'.
ls_fileinfo-file_name = lv_file.
call function 'SDOK_MIMETYPE_GET'
    exporting
      extension            = lv_doctype
      x_use_local_registry = 'X'
    importing
      mimetype             = ls_fileinfo-mimetype.
append ls_fileinfo to lt_fileinfos.
file store
clear lv_error.
call function 'SKWF_PHIO_STORE_CONTENT'
    exporting
      phio                = ls_new_phio
    importing
      error               = lv_error
    tables
      file_access_info    = lt_fileinfos
      file_content_binary = lt_filecontent.
if lv_error is not initial.
    exit.
endif.
Fill BO 'BUS20900'.
clear lv_business_object.
lv_business_object-instid = guid.
lv_business_object-typeid = 'BUS20900'.
lv_business_object-catid = 'BO'.
Link create
try.
      call function 'SKWG_OLS_IO_LINK_CREATE'
        exporting
          io              = ls_new_loio
          business_object = lv_business_object.
    catch cx_obl.
    cleanup.
endtry.
ENDFUNCTION.
Regards
José Miguel Haro

Employee photo is not displayed in ESS Who's who service

Hi colleagues,
Please help our colleague in this issue:
1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
Best regards

Hi,
Yo would have check the forum..
Display Photo in Employee Who is who search
Kind Regards
Hari Sankar M

Photo albums not displayed when viewing my website

I have a website for my band www.lastarrow.combut the photos page isn't displaying properly.
It should look like this:
http://i68.photobucket.com/albums/i27/eastwoodandy/Picture5.png
But it is displaying like this:
http://i68.photobucket.com/albums/i27/eastwoodandy/Picture7.png
The page was fine a couple of weeks ago, the only recent change is that I've had to remove the domain name from mobileme (because I now have two websites & domain names) and just have www.lastarrow.com redirect to http://web.me.com/andywoodhouse/Last_Arrow/Home.html
The direct link to the photos page is http://web.me.com/andywoodhouse/Last_Arrow/Photos/Photos.html
Can anyone offer any help on this?
I tried changing some of the attributes of the photos page (changing the photo album borders) and republished but they are still not displaying.
I have also done a test by publishing to folder and opening it in a browser and it works perfectly fine.

Andy:
Try using the File->*Publish All to MobileMe* menu option to republish your site. See if that will work. I see you're at the latest iWeb version, 2.0.4, so that's not a factor.
OT

Iphoto photos will not display in iworks

I have a new Macbook Pro with ILife with Imovie 8 and Iphoto 8. Some photos that I just scanned and imported to iphoto after using an Epson Photo Perfection scanner, will not display in imovie. They were saved in jpeg format and appear fine in my iphoto files. I have even made changes to them in iphoto and saved them to see if that helped, but they still won't display in imovie. The only problem similar to this that I could find in the discussions is when the photos are saved in RAW format. These are not. Any ideas?

Some photos that I just scanned and imported to iphoto after using an Epson Photo Perfection scanner, will not display in imovie. They were saved in jpeg format and appear fine in my iphoto files.
Try dropping one of the files directly from the Finder to the iMovie '08 "Project" window. If the files is accepted, then you know the compression format is good and can check things like file, event, or album names that may prevent the photos from being displayed via the iMovie '08 browser. If the file is not compatible, then iMovie will not import it and you can try "re-compressing" the files in an image application to see if they will then be recognized.

Photo Attachments not Displaying in Gmail

Similar Messages

Maybe you are looking for