Photo Blog Formatting Problems

I have a blog and sometimes like to put photos in the body of the post. Problem is that when I do that the formatting gets all messed up once the page is published. In iWeb everything looks great, but through a browser (Windows or Mac) things are overlapping and spacing is not how I it's supposed to be.
Am I maybe adding the pictures in a wrong way or something? I just drag them from the iPhoto menu on the left hand side. Below is a link to a recent post showing the problem.
Thanks!
http://web.me.com/yensid98/thebapage/Blog/Entries/2009/5/29_UP.html

I have this exact same problem and came to the forums to look for an answer. I usually wind up publishing and then going back and forth moving text up and down, and publishing over and over again until it looks acceptable. I'm really hoping to find a better solution, though.

Similar Messages

Blog formatting problem

I am trying to set up my Muse blog on BC and the formating of the layout and text is horrible. I need help on how to do that. I have tried everything and read everything I have found. Please help!!! Elvi
www.renewedlife-counseling.com/blog.html

To use BC for a blog built in Muse you need some knowledge of how Business Catalyst templating works.
In a nutshell, you need to:
1: Upgrade to a higher paid plan which it looks like you have done
2: In Muse create a template and call it something like blog template (this will only be used for the blog layout)
3: In that template where you want the actual blog to appear you need to add the tag (tag_pagecontent}
4: That is about as far as you can take it in Muse
5: From there it is all Business Catalyst
6: You will have to know some HTML and CSS from there on in to get the actual blog articles to look the way you want.
7: Research blog layouts in the 'Module Templates' section of the Business Catalyst Admin
It would be too much to explain every step as it is a bit complex but hopefully that will get you in the right direction.

I have my photos iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How can I recover deleted photos from formatted micro sd card?

How can I recover deleted photos from formatted micro sd card?

As long as you haven´t low level format the card, use Photorec. It is open source.
My Swedish blog
X100, 7D, 6D, 17-40/4L, 70-200/2,8L IS II, 17-55/2.8 IS, 24-105/4L, 85/1,8, 50/1,4, 24/1,4L II, Helios 58/2
Darktable, RawTherapee, Photomatix, Luminance HDR, GIMP 2.9.1.

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

Exception in XML Parser (format problem?)

Hi Experts,
I am working on IDOC -> AS2 Configuration and the AS2 Configuration has the below structure
<RecordSet>
 <Row1>
 <row1 - field1>
 <row1 - field2>
 <row1 - field3>
 </Row1>
 <Row2>
 <row2 - field1>
 <row2 - field2>
 <row2 - field3>
 </Row2>
 <Records>
 <Record1>
 <Record1-Field1>
 <Record1-Field1>
 <Record1-Field1>
 </Record1>
 <Record2>
 <Record2-Field1>
 <Record2-Field1>
 <Record2-Field1>
 </Record2>
 </Records>
</RecordSet>
We are getting the expected Structure when we AS2 Receiver has the xml format. But while doing module development with the strctxml2Plain, we are getting the below error in RWB CC Monitoring.
Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException'
Any ideas, why this error we are getting.....
Thanks in advance,
Regards,
Vasu

Hi Vasu,
Not in the Mapping of IR.
In BIC Mapping Designer you have to test with the standard Mappings by providing the sample file whether the Conversion is happening correctly or not.
You have to take the same input file that what ever you are having now.
So that it will say clearly what is the problem in converting the XMLto the required EDI Format...
Check whether you have any Date Format Values are comming from the input file.
Regards
Seshagiri

When I photo blog (Blogger) useing FireFox, I don't get the link to open my images in a new page like I do using IE. Why?

I have a photo blog using Blogger and when I would submit a new post using IE, anyone was able to click on the image after I had posted it and it would open full screen in it's own page. I'm not sure what you call it but your arrow pointer would turn into a hand and you could click on it. Now, when I post using FireFox, I don't get that ability. If I use FireFox and view older post that were created with IE, the link is there but not the post from FF. It's only when I post using FF.
Thanks,
I Love FF

I have a photo blog using Blogger and when I would submit a new post using IE, anyone was able to click on the image after I had posted it and it would open full screen in it's own page. I'm not sure what you call it but your arrow pointer would turn into a hand and you could click on it. Now, when I post using FireFox, I don't get that ability. If I use FireFox and view older post that were created with IE, the link is there but not the post from FF. It's only when I post using FF.
Thanks,
I Love FF

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

I am exporting a pages doc to ePub and I keep getting formatting problems any idea thx in advance

Since you don't say what the "formatting problems" are, all we can say is:
"There, there. Hope they get better."
Peter

Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Format problem when export to RTF

Hi,
Iam creating a RTF template, when export to pdf everything working fine. However, when i export to RTF(word) alot of document properties got lost such as :
font size default to 12 when it's blank line; page number are not re-start for multi sections; table properties not holding, header, footer and edge margin are not holding, etc...... Is there any way to fix these. I tried to create a word macro to fix some of the format problems, but the macro have to run manually instead of initialized form a text field option on exit. Any idea on how to fix or work around would be appreciated.
Thanks,
Tam

im2famous4u wrote:
Do you know if and when Pages will provide support for tables in rtf format? (My school requires that I send all assignments rtf format.)
As Yvan points out, no one here can write what they know about it, and the vast majority of us know nothing about it.
You cannot take any decision based on the assumption that Pages will one day support tables in RTFs, because it may never happen. If you need both RTF and tables, the only option is another tool (like NeoOffice, TextEdit, MS Office and so on).

Convert Web Page to PDF formatting problem - 1st line of each paragraph outdented

Hi Folks,
I get a formatting problem when I convert any web page to PDF using the 'Convert Web Page to PDF' option - the 1st line of each paragraph is outdented.
eg if i convert http://helpx.adobe.com/acrobat/using/whats-new-acrobat-xi.html I get this:
I get the same problem using IE 9, Chrome (latest) or Firefox 30.0. I don't get it converting a Word doc to PDF.
I'm using Adobe Acrobat XI Pro on a PC running Windows 7.
Is there a simple setting somewhere I am missing?
Any help much appreciated!

Are you using "Adobe PDF" or "PDF or XPS?" I sounds like "Adobe PDF," but trying to be sure. Have you updated your Acrobat to the latest version? If not, try that.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Kodak Photo CD format

I have hundreds of Kodak Photo CD's which I built up by having my negatives scanned onto this format from the 90's and early 2000. I'd love to get these images into Aperture in their original format and have Aperture treat them like RAW files. Aperture doesn't support this format at the moment so the only way to import them is to use Photoshop and the Kodak Photo CD plug-in and then save the files as TIFF images. Messy and time consuming. It would be much easier to just pop the CD into my Mac Pro and have Aperture import them just like any camera-card.
I have requested this through the feedback form http://www.apple.com/feedback/aperture.html If like me you also have a stack of old Kodak Photo CD's that you'd like to manage in Aperture then use the form to request it that Aperture recognises the format, the more people who do this will mean Apple will look at adding this format.
Just how many people out there have images on this format?
MacPro, 30" Cinema Display Mac OS X (10.4.8) MacBook

This is another "long way" but you might want to try to use the program Graphic Converter included free with most Macs to change the Kodak format to one that Aperture recognizes. It is a powerful program that recognizes and converts many photo file formats. It can also be run in Batch mode (may take a while), and you can save the converted files on your HD for import to Aperture. Maybe less hassle than the iPhoto way.
-Robert

Date Format problem...

Hi users,
Forte version : 2.e.2 and ForteWebSDK
Datacase : Oracle
We have a problem with a simple HTML text field which acccepts
a date. When we try to update the record with some date, the following
exception occurs:
24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
project Rap
tServices, class RaptSqlMethods, method updateActivity, methodId 104,
line 51, e
rror from database is:
ORA-01830: date format picture ends before converting entire input
string
The Oracle manual says that the above exception occurs when there are
some extra characters on that field, which is not the case. In fact,
we raise our own exception for the cases like : o1-Apr-1997,
01-apr-97 etc. The correct format is 01-apr-1998.
Same date soemtimes is added to the database successfully. Waht I mean
to say that the exception deos not occur consistently.
We just conevert the String taken from the HTML field into a Forte
DateTimeData Object and send it to database. May be, the conversion
part is causing the problem. But, once again the problem is not
consistent.
Any ideas in this will be appreciated.
Thanx in advance
-Rajeev Talwar
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

We had the same problem when our application first went live. The
default date format for our Oracle database is 'dd-mmm-yy' without the
time component. The default format for datatype DateTimeData is
'dd-mmm-yyyy hh:mm:ss'. Since we did not want to change the default date
format for the Database, we included in our service partitions an Alter
Session statement to change the NLS_Date_format attribute in Oracle to
conform to the Forte DateTimeData format. It worked.
Kam Chow
Mazda Australia
-----Original Message-----
From: Gary F Giger [mailto:[email protected]]
Sent: Thursday, June 25, 1998 4:11 AM
To: Rajeev Talwar
Cc: [email protected]
Subject: Re: Date Format problem...
I was having the same problem a few weeks back when I would
read/write
dates to Oracle. I was using objects of type DateTimeData and I would
occasionally get errors like you said you were. I found discovered my
problem. Sometimes I would process a null date and would get an error.
So to
resolve this issue, I simply changes my objects of type DateTimeData to
type
DateTimeNullable. This enabled my Forte Application to handle regular
dates
as well as null dates. I have not gotten any oracle errors since then
with
regards to dates. Hope this helps.
Rajeev Talwar wrote:
Hi users,
Forte version : 2.e.2 and ForteWebSDK
Datacase : Oracle
We have a problem with a simple HTML text field which acccepts
a date. When we try to update the record with some date, the following
exception occurs:
24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
project Rap
tServices, class RaptSqlMethods, method updateActivity, methodId 104,
line 51, e
rror from database is:
ORA-01830: date format picture ends before converting entire input
string
The Oracle manual says that the above exception occurs when there are
some extra characters on that field, which is not the case. In fact,
we raise our own exception for the cases like : o1-Apr-1997,
01-apr-97 etc. The correct format is 01-apr-1998.
Same date soemtimes is added to the database successfully. Waht I mean
to say that the exception deos not occur consistently.
We just conevert the String taken from the HTML field into a Forte
DateTimeData Object and send it to database. May be, the conversion
part is causing the problem. But, once again the problem is not
consistent.
Any ideas in this will be appreciated.
Thanx in advance
-Rajeev Talwar
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
Gary Giger
Raytheon Systems Company
300 Science Park Road
State College, PA. 16804
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
This message has successfully passed virus checking.
Mazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Photo Blog Formatting Problems

Similar Messages

Maybe you are looking for