Photo booth does not correctly after installing the newest firmware

is anybody there, who can help me.
after installing a from apple recommended EFI-frimware-update, the photo booth applications stars, but the camera doesnt work. the photo booth display does not show me toward mey computer. it shows only a green field...
does anybody have experience with that problem?
how can i solve it?
i do need my camerea/photo booth very urgently.
thanks for every idea

Hi both of you,
Have you tried Repairing Permissions ?
http://discussions.apple.com/thread.jspa?threadID=122021
Do it from the Hard drive rather than the Install disk.
This will read the RECEIPTS folder for the most up-to-date info.
9:39 PM Tuesday; November 21, 2006

Similar Messages

  • Photo booth is not opening after installing maverick

    I updated my computer to Maverick and now photo booth is not opening. I could care less about the application itself but there are pictures that I really do not want to lose. It says that "You can't use this version of the application "Photo Booth" with this version of OS X. You have "Photo Booth" 3.0.3." I can't find any information on updating the application and I can't find any way to recover the pictures from the application. Please help.

    You're trying to open an outdated copy of the application. Delete the copy and use the one in the Applications folder. Never move or copy built-in applications.

  • Apache does not start after installing the policy web agent

    Hi,
    We get the following error when we start the apache webserver on linux which has opensso policy agent installed/configured to it.
    ./apachectl start./apachectl: line 77: 4453 Segmentation fault $HTTPD -k $ARGV
    Environment:
    OS: Linux SystemName 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux (32 bit)
    WebServer: httpd-2.0.50-i686-pc-linux-gnu.tar.gz
    Policy Web Agent: Apache_2.0.54_agent_2.2_RHAS3.0.tar.gz
    Could not find the issue/solution for this problem on internet... Please suggest if anyone has some solution to this.
    Regards
    Manoj

    Hi,
    Once I had an iAS 1.0.2.2 running without problems. However after installing Patch 7 for Forms (released 27 august 2001) I get exactly the same error messages as Pieter. I have tried starting apache as administrator, comment out mod_ose, set wv_gateway_cfg, but none seem to work. Please help.
    Environment:
    iAS 1.0.2.2 on Windows NT
    Oracle 817 on AIX
    null

  • Epson Stylus Photo 1290 does not print after installing Snow Leopard

    Hello.
    I have this silly problem of having an old very good printer, and a very new system. Since my update the printer simply wont print. It gives me a "communication error". Printer Utility is working though ! I can check ink settings, clean the printing heads, but when printing the test page, which is completely EMPTY.
    The Printer Utility taks AGES by the way, to do anything i want. VERY slow.
    Oh, and yes, i also installed Gutenberg printer drivers additionally,
    printing works there, but it is ooooooddly slooooow as well, **** it !!
    Any ideas ? Thank you !!
    Message was edited by: maringorama

    btw, this is how i got to know about the "resetting printer queue" - OFFICIAL EPSON ANSWER:
    (sorry for German speaking users only ...)
    Bitte gehen Sie in diesem Fall wie folgt vor.
    1. Löschen Sie alle Epson Drucker aus der Druckerliste.
    2. Deinstallieren Sie den Treiber über die Installationsroutine. Besteht diese Möglichkeit nicht gehen Sie bitte direkt zu Punkt 3.
    3. Löschen Sie den Inhalt des Ordners "Epson" unter HDD -> Library -> Printers.
    4. Suchen Sie im Finder nach Druckermodell und löschen gefundene Einträge.
    5. Starten Sie Ihren Mac neu.
    6. Laden Sie den aktuellen Treiber von unserer Website und installieren Sie diesen. http://esupport.epson-europe.com/de-DE
    7. Schließen Sie den Drucker direkt am Mac an, Kabellänge <= 2m. Sollte der Drucker im folgenden nicht gefunden werden schließen Sie ihn bitte per USB und nicht per FireWire oder Netzwerkkabel an. Verwenden Sie keinen USB-Hub und nicht den USB-Port an der Tastatur.
    8. Drucker hinzufügen:
    8.1 Power PC 10.x.x
    Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen (unter Tiger 10.4.x dann weitere Drucker) und wählen die korrespondierende EPSON-Schnittstelle (Epson-USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
    8.2 Mac-Intel 10.4.x
    Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen und wählen die korrespondierende EPSON-Schnittstelle (USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
    8.3 Leopard 10.5.x
    Gehen Sie in Drucker & Faxe, wählen Sie hinzufügen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
    8.4 Snow Leopard 10.6.x
    Gehen Sie in Drucker & Faxe, wählen Sie das "+" Zeichen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk oder per Epson Firewire hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
    Beim Update von 10.4 oder 10.5 auf 10.6 empfehlen wir das Drucksystem zurückzusetzen und dann die Treiber neu zu installieren. Dieses Verfahren kann auch beim bei Punkt 1 benutzt werden. Allerdings sind dann alle Drucker gelöscht!
    Falls Sie noch weitere Fragen, Wünsche oder Äußerungen haben, stehen wir Ihnen gerne zur Verfügung.
    Mit freundlichen Grüßen,
    EPSON Deutschland

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

    Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
    Documents say
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
    But I can't see my iPad Mini in iTunes.
    And my  Ipad  (Settings, General, iTunes Wifi Sinc)  shows  a message :" Sync will resume when xxx(my PC with iTunes) is available "...
    Both are in the same network,
      Ipad mini is is plugged in to power
    . iTunes is open on the computer
    what can i Do ???

    Hi Skydiver119,  and tks for four interest.
    I have done exactly as you say, but it does not work for me.
    You indicated  " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
    I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
    I disconnect the wire,
    and my iPad disappears from my iTunes screen.
    in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
    So, I can not sync via wi-fi
    I appreciate if you can help me.

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My MacMini does not stop after giving the order ''switch off''.What can I do?

    My MacMini does not stop after giving the order ''switch off''.
    It stops only, after pushing the button ''on/off'' for some seconds.
    What can I do?
    frahsun

    boot the Mac into safe mode, repair permissions while in it, then reboot normally.
    if that doesn't help, try resetting the System Management Controller (SMC).

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • Fastdial does not work after installing version 7.0.1

    Fastdial does not work after installing version 7.0.1

    '''this will fix your problem with FF 7.01 '''
    '''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
    '''''This link will fix Fast Dial for Firefox 8.0.1'''''
    '''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

  • Mp600r does not work after installing mavericks 10.9 what do I do now ?

    Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

    This thread should help:
    https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

  • Flash Player Does Not Work After Installing on Windows XP

    I had been playing a shockwave game for several days and had completed 19 of 35 levels. When I went to play it again, I received a message that I need to update to a newer flash player. I downloaded it successfully, but it does not work. There is no file size and I uninstalled and reinstalled it several times. I also changed the internet settings as suggested. I am also the administrator of and only user of this computer. I can also play the same game on another computer that has windows 7 and have no problems. I have completed 33 of 35 levels with no problems. The computer with XP has a 32 system.
    Any help  would be appreciated.

    I had been playing a shockwave game for about a week . When I went to play it again, it stated that I need to upgrade to a newer adobe flash player. I have windows  xp with a 32 system and explorer 8 browser.  After installing the flash player, it has no file siz for the player.. After I installed it, the page says it had been installed. The game still says I need to upgrade the flash player. I uninstalled it, reinstalled it, changed my internet settings as suggested, and it still does not work. I can play the same game on my other computer with windows 7 with no problems. It has a file size listed for the flash player.  The computer that I am using now has windows 7 and a file size for the adobe flash player.
    Any help with this matter will be greatly appreciated.
    Ernestine W. Washington

  • Windows NT does not boot after installing NI-CAN 1.6.0 or security update

    We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
    On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
    On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
    Does anyone else have similar experience with this problem?
    Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

    Hi,
    I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
    What CAN hardware do you have (PCI, PCMCIA, etc)?.
    Let me know this details and I'll try to reproduce the problem.
    DiegoF.
    National Instruments.

  • SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

    After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
    Oracle BPEL Process Manager Full Cycle
    An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
    Build Information:
    Oracle BPEL Server version 10.1.3.4.0
    Build: 0
    Build time: Sun Jan 11 19:33:46 PST 2009
    Build type: release
    Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
    Exception Message:
    javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
    When I check the log I can see this:
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>j2ee</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>soasit.BCR.WAN</HOST_ID>
    <HOST_NWADDR>172.19.128.128</HOST_NWADDR>
    <MODULE_ID>security</MODULE_ID>
    <THREAD_ID>15</THREAD_ID>
    <USER_ID>oracle</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>ServletException cause</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
         at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
         at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
         at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
         at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
         at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
         at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
         at _index._jspService(_index.java:104)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
         at java.lang.Class.getMethod(Class.java:1581)
         at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
         at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
         at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
         at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
         ... 52 more
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
    The platform is one for development installer on RedHat 5 OS.
    Any ideea ?
    Edited by: [email protected] on Jan 26, 2009 4:34 PM

    Man Christian!
    1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
    I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
    Copying did not help.
    I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
    ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
    copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
    copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
    copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
    cd %ORACLE_HOME%\bpel\system\services\lib
    %ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
    After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
    Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
    started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
    As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
    With Best Regards,
    Alexey

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for