Photo Booth doesn't work after Lion update

It says Photo booth unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again?
And either way (restore windows/do not restore windows) it still won't open, it just quits unexpectedly.
Is there anything I can do instead of taking it to the store?

aquaman wrote:
My mac IS up to date.
No reason it should have stopped working. Maybe a problem waiting to happen and an upgrade pushed it over the edge. Provide some specs on your Mac, but I would really advise making an appointment at the Genius Bar at your local Apple Store.
Good Luck
Pete

Similar Messages

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

  • Photo booth doesn't work since lion installed

    what's up.  photo booth doesn't work since i dowloaded lion.  Help

    aquaman wrote:
    My mac IS up to date.
    No reason it should have stopped working. Maybe a problem waiting to happen and an upgrade pushed it over the edge. Provide some specs on your Mac, but I would really advise making an appointment at the Genius Bar at your local Apple Store.
    Good Luck
    Pete

  • Photo Booth became black screen after Newpad updated to iOS 7

    Photo booth became black screen after Newpad updated to iOS 7

    It is not a widespread issue that requires apple to come out with a fix, I have many ipads that were updated and have no issues.
    I would suggest you back-up and restore your device, that can repair many issues if the original update was corrupted.

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • The 7 key doesn't work after lion install

    The 7 key on my MacBook pro keyboard doesn't work following lion installation. (I'm using my iPad right now obviously!)
    When I press 7, basically random stuff will come out. A set of 3 to 5 random numbers or some "command" that whatever program I am in doesn't recognize. 
    I tried rebooting. I have no idea where to even begin, help!

    And of course this morning all keys are back to working again! But last night it was 7, J, U gibberish.
    At first glance it does seem like something that might be a hardware problem, but I am deeply suspicious of coincidences like this. I'm kind of like house md that way I guess.  Especially when at least two of us experienced this.
    I think I will also wait for the next software update and see if that helps.  At least I have my iPad to use when the keys are on the fritz.
    Good luck!

  • EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

    Hello Dear,
    I've using my Epson Stylus CX5600 for a  long time with OSX 10.7 Lion on my Mac.
    The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
    After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
    on my macbook doesn't works anymore
    I've re-installed a lot but when I try to print the sheets appears in blank
    The driver-version available in Mountain Lion is 1.5
    I guess this is the problem and need a urgent correction driver update
    I'm looking forward to the internet and Epsons websites but didn't find nothing,
    in Epson website doesn't
    Can you help me please?
    Thankyou

    Hi my friend,
    I've tryed Bonjour, but only works Windows to install a print for Mac.
    I need the opposite... print from Mac to Windows.
    Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
    I can't remember but I did this:
    1. In iMac System Preferences->Print&Fax->"+"
    2. In "Add Printer" click and Tool Bar->Customize Toolbar...
    3. Add "Advanced" to Tool Bar and click "Done"
    4. Click Advanced->Type->LPD/LPR Host or Printer
    5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
    6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
    I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
    Do you have any idea?
    Thank's again

  • Photo Booth doesn't work, what did I do wrong?

    I just got a new iSight, and in the very beginning everything worked properly, including the camera and the front row remote control. However, after I have installed few softwares I need to use (Backup 3, Microsoft Office, and the wireless Logitech keyboard and mouse, the Photo Booth would not open any more and gives me the following warning: "Make sure your digital video camera is properly attached and turned on. If you are using the camera with another application, close that application before trying to open Photo Booth again." The remote doesn't work either. Could anyone help with the idea what it might be? Thanks a lot as always.
    Zo

    The issue has been solved thanks to the great guys on the Support Web Chat, they lead me through the resseting PRAM and NVRAM, and now everything works just fine.
    Cheers to all.
    Zo

  • MacBook Air Safari doesn't work after ML update

    After I updated my MacBook Air 2012 to Mountain Lion yesterday, Safari stopped working. It says it's connected but Safari won't open any page.
    This is the third time it happens and I'm getting sick of it (SL, Lion OS and now ML)
    I had to reset my iMac (PRAM) to get it back working again, but is there another suggestion?
    Thanks in advance.

    Hey I just foud this on this forum. It's worth a try :-)
    Also, are you able to ping the network. Go to Terminal and type the following:ping google.com
    you should get something like this:
    Arnolds-MacBook-Air:~ arnieaz$ ping google.com
    PING google.com (74.125.224.168): 56 data bytes
    64 bytes from 74.125.224.168: icmp_seq=0 ttl=55 time=25.236 ms
    64 bytes from 74.125.224.168: icmp_seq=1 ttl=55 time=29.222 ms
    Christoper Waiz
    Re: WiFi Issues With MacBook Air 
    Jul 27, 2012 11:26 AM (in response to curvetr)
    I had similar issues to the ones that seem to be plaguing people in this thread. However, I found a solution that worked for me, and will hopefully help you and some others!
    System prefs > Network > Cog/gear button on the bottom left (sorry dont now what it's called) > Set service order.
    If you find that the service order puts bluetooth ahead of Wifi, try switching Wifi up to the top spot. It worked for me. Let me know how it goes, hopefully it works!
    Best of luck, Chris

  • HTML animation effects doesn't work after last update

    After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
    Various animated png in html project appears immediatly without shows transitions or deformations.
    I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
    I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
    A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
    The same animation made with Hedge produce more the 100MB folio.
    why new version of dps don't show my html anim correctly ? I hope adobe correct this proble. 

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • RM 900 remote doesn't work after driver update

    Hi!
    After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
    I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
    Any clue how to make it work again?
    Using Windows XP SP3 and Audigy Platinum Ex.
    Thank you again in advance.
    PD: Excuse my poor english, it's not my nati've language.

    Hello Jashue67,
    Sorry to hear about all the trouble with the Apple TV.  It sounds like you have done a restore but need to pair your Apple TV remote at this point.  You can follow these steps to pair the remote:
    Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
    You can find the full article here:
    Apple TV: Pairing and unpairing the Apple Remote
    http://support.apple.com/kb/ht1555
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • N73: restore doesn't work after firmware update

    Hello!
    I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
    Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
    After the update I tried to restore the backup via the same app.
    Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
    Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
    Is there another solution that doesn't involve buying this 3rd party software?
    TIA

    The phone is working well...
    I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

  • Internal camera doesn't work after Firmware Update

    Hi everybody,
    I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
    thanks
    MacBook   Mac OS X (10.4.8)  

    Hi,
    problem solved restarting with OptAlt+PR

  • Ipod doesn't work after firmware update

    I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
    Now i'm trying to recover it again but my computer doesn't recognize it.
    ¿Is there anything I can do?
    Thanks in advance.
    Jse

    The best place to look for help first is Genuine Apple help directly from Apple.
    Read the iPod Touch Users Guide.
    http://support.apple.com/manuals/#ipodtouch
    Also start with the basics from Apple.
    1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
    2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
    And More..........

  • HP Laserjet m1214nfh MFP Doesn't work after firmware updating

    Hello
    HP Laserjet m1214nfh MFP (USB Connetcion).
    I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing"  and after some seconds LCD turns off and again prompts "Initializing".
    Please guide me.
    thank you

    Hi,
    Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
    If the same persists please contact HP support by following Technical support after you buy for your region below:
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for