Photo Booth not working, Please help

I have a Macbook Air, and when i try to take a picture on photo booth it says "Photo Booth couldn’t save your photos, Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time. I went to finder clicked "Get info" for photo booth, then under sharing & permissions I added my name to owner under "read & write". I then tried to take a picture but it still will not work. Does anyone know hot to fix this?

First, undo the damage you did by repairing permissions in Disk Utility. Never change the permissions of any file unless you're certain you know what the effect will be. The change you made will have no effect on the problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
    The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer:  Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • I just installed Lion on my iMac and Photo Booth not working. What should I do?

    Please provide me guidance how to solve problem. Just installed Lion to my IMac then realized that Photo Booth not working. If I need to reinstall the application, how?
    Thanks
    Duangarthit

    I had same issue and went back to snow lepard, there was a known issue with Lion and a patch was issued last wednesday for Lion it may be ok if you update it I dont know

  • Facetime,App store and photo booth not working OS X

    Facetime, Appstore and Photo booth not working OS X

    I would recommend first doing a PRAM reset. You can find instructions for that in https://discussions.apple.com/docs/DOC-3603.
    Please let us know if that works or not, there are several other things you can try.

  • HT2129 I successfully installed my iPhoto but I can't see I accidentally deleted my "Photo Booth", Can you please help me to install it?

    I successfully installed my iPhoto but I can't see I accidentally deleted my "Photo Booth", Can you please help me to install it?

    Hi BDAqua,
    I tried to install Pacifist, THEN the Choices are:
    -Open Package
    -Open URL
    -Open Apple Install Discs
    -Search Receipts
    so i choose " OPEN APPLE INSTALL DISC"
    THEN I inserted one of the DVD, the "APPLICATION INSTALL DVD"
    THEN this what came up in the
    Package Contents
    > Contents of Install Bundled Software
    > Contents of InstallBundledSoftware.mpkg
    > Contents of CPUHelpFiles.mpkg
    > Contents of iWeb.pkg
    > Contents of GarageBand.mpkg
    > Contents of iDVD.mpkg
    > Contents of iPhoto.mpkg
    > Contents of iMovie.pkg
    > Contents of AppleIntermediateCodec.pkg
    > Contents of iLifeCookie.pkg
    > Contents of iLifeSoundEffects_Loops.pkg
    I open everything just to see the one you send me but I can not find it,
    Do I have to insert Mac OS X Install DVD too?
    The Application Install DVD was installed twice already,
    Does that affect the memory of my Macbook?
    Thanks again,
    Waden

  • HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

    my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

    Sounds like it may be a hardware issue.
    Please contact Apple Support in your country.
    Here is a list of numbers: http://support.apple.com/kb/HE57
    Regards
    J

  • I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

    this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
    is there any other method to download ios 6.1.2.
    my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
    kindly help.
    thanks

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    I would imagine your iPhone was hacked to make it work on your local carrier.
    Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
    entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply

  • HT1414 my handsfree is not working please help me

    Hi There!
    I am using Iphone 4s and ny handsfree in not working please help me

    Try restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. 

  • HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    Contact the email provider and obtain the correct setup information.

  • The built-in mic in g50 122ca laptop model is not working. please help me out.

    the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

    here is a sample code .
    so far you procedure looks good but
    i bet you have to specify the name of report , instead of 'filename'.
    see this
    Plist_id := GET_PARAMETER_LIST('P_name');
    IF NOT ID_NULL(Plist_id) THEN
    DESTROY_PARAMETER_LIST(Plist_id);
    END IF;
    Plist_id := CREATE_PARAMETER_LIST('P_name');
    ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
    -- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
    -- here Pro_License is the name of report.
    did you tried to see if the parameter passed using a message ?
    try
    message('parameter name'); pause; write this before "run_report".

  • My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    Please helppppp

Maybe you are looking for

  • ImageReady alternative...?

    I hardly used ImageReady when I had CS1 and CS2, but sometimes I needed to make a animated gif and ImageReady was perfect for that. Today someone asked me to change one of the gifs I made, and to my utter surprise I found out ImageReady has been disc

  • ITunes won't launch (even after reinstall) Win XP PRO

    Hey everyone, I've been using iTunes for about 18 months now. The program is great and I can't imagine using my computer without it. I've recently finished adding artwork to all of my albums (over 300), which I've searched for myself in google, so yo

  • To set payment block to 'A' in F-59 transaction on the original document.

    When I run the transaction f-59 for a document, my requirement is that I should set the payment block to 'A' for the original document. I tried using the BTE - sample_process_00001120, but it doesn't seem to update the value for the original document

  • Substitution tags value

    Hi, can I get the substitution tags value used by template and assign this to a variable defined in a Unstructured template? My problem is to manage a conditioned exit action from a reports chain called by several Dynamic Pages thanks Giovanna

  • Consuming a web service using UTL_HTTP, Complex XML types

    this is the first time i have encountered a complex type calling a web service from PLSQL. i have sucsessfully called other methods from this same web service so i know its working. this is what i have to pass in: <xs:complexType name="AddJobRequestS